Insignia NS-ICEF2W2 Manual de usuario
Before using your new product, please read these instructions to prevent any damage.
USER GUIDE
Ice Maker
NS-ICEF2W2
www.insigniaproducts.com
2
Contents
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Package contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Tools and materials needed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Installing the ice maker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Installing the ice maker in a top mount freezer . . . . . . . . . . . . . . . . . . . . . . . 5
Installing the ice maker in a bottom mount freezer . . . . . . . . . . . . . . . . . .13
Connecting the ice maker to the water supply . . . . . . . . . . . . . . . . . . . . . .19
Tips for using your automatic ice maker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Maintaining your ice maker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
ONE-YEAR LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Introduction
Congratulations on your purchase of a high-quality Insignia product. Your
NS-ICEF2W2 represents the state of the art in ice maker design and is designed for
reliable and trouble-free performance.
3
Ice Maker
www.insigniaproducts.com
IMPORTANT SAFETY
INSTRUCTIONS
WARNING
1Read these instructions.
2Keep these instructions.
3Heed all warnings.
4Follow all instructions.
5Do not place fingers or hands into the automatic ice making mechanism while
the refrigerator is plugged in. Doing so my expose you to possible injury.
6Keep your hands away from the ejector mechanism and the heating element
that releases the ice cubes, located on the bottom of the ice maker.
7Refer all servicing to qualified service personnel. Servicing is required when
the appliance has been damaged in any way, such as the power-supply cord
or plug is damaged, liquid has been spilled or objects have fallen into the
appliance, the appliance has been exposed to rain or moisture, does not
operate normally, or has been dropped.
WARNING
Electric Shock Hazard
Failure to follow these instructions can result in electric shock, fire, or death.
1WARNING–Do not touch the interior of the freezer compartment with wet
hands. This could result in frost bite.
2WARNING–Do not use electrical appliances inside the food storage
compartment of the refrigerator, unless they are of the type recommended by
the manufacturer.
CAUTION
RISK OF ELECTRIC
SHOCK
DO NOT OPEN
This symbol indicates that
dangerous voltage constituting a
risk of electric shock is present
within your refrigerator.
This symbol indicates that there
are important operating and
maintenance instructions in the
literature accompanying your
refrigerator.
4www.insigniaproducts.com
3Unplug the refrigerator before performing user maintenance on it.
4This appliance can be used by children age eight years and older and persons
with reduced physical or mental capabilities or lack of experience and
knowledge if they are given supervision or instruction concerning the use of
the appliance in a safe way and understand the hazards involved. Children
should not play with the appliance. Cleaning and maintenance should not be
performed by children without supervision.
5If a component part is damaged, it must be replaced by the manufacturer, its
service agent, or similar qualified persons in order to avoid a hazard.
6WARNING: Connect this refrigerator to a potable water supply only.
7To eliminate the danger of electric shock during installation, you must unplug
the refrigerator.
8The minimum inlet water pressure should be no lower than 138 kPa (20 PSIG).
The maximum should be no higher than 827 kPa (120 PSIG).
Features
• Produces up to 2.7 pounds of ice a day, depending on the size of your
refrigerator.
• Stores up to 5.5 pounds of ice
• Prevents overflow by automatically detecting when storage bin is full
• Works with these Insignia refrigerators: NS-RBM18SS0, NS-RTM18SS2,
NS-RTM18WH2, NS-RTM18BK2L, NS-RTM18SS2L, NS-RTM18BK2,
NS-RTM18WHD2, NS-RTM18BKD2, and NS-RTM20SS3.
Package contents
Ice maker unit Ice storage bin
Plastic water supply tubing
Water valve
Water inlet tube
Tube clamp Leveling bracket
screw
Self-tapping
screws (3)
Ice maker mounting
screws (3)
Plastic clamp (3)
Mounting box Box cover
Top Mount Freezer only Bottom Mount Freezer only
Water pipe
joint
Sealed silica gel
block Connecting
plate
5
Ice Maker
www.insigniaproducts.com
Tools and materials needed
You’ll also need:
• A freezer shelf to hold the ice storage bin. If your model does not have one,
contact your dealer to order one.
• Access to a household cold water line with water pressure between 20 and
120 psi.
The water line kit (including copper tubing and shut off valve) are available in a kit
(#5303917950) from your local hardware or plumbing supply store.
Installing the ice maker
Your Insignia refrigerator comes set up for ice maker installation.
Installing the ice maker in a top mount freezer
1Unplug the refrigerator from the wall outlet.
2Remove the freezer shelf and ice tray rack from the freezer.
CAUTION: To eliminate the danger of electric shock during installation, you
must first unplug the refrigerator.
Putty knife Needle nose pliers or
nut driver Adjustable wrench
1/4”OD copper supply
line with compression
nuts and ferrules
Knife
Phillips
screwdriver
Flat blade
screwdriver
Shut off valve (non
self piercing) Water line kit
#5303917950
Electric drill with a
1/4”drill bit
6www.insigniaproducts.com
3Remove the plug from the inside of the freezer compartment with a putty
knife.
4Peel off the label covering the ice maker hole on the back of the refrigerator,
then remove the foam from the hole with the needle nose pliers. Retain the
foam for future use.
Plug
Remove label
7
Ice Maker
www.insigniaproducts.com
5Push the water inlet tube into the small hole on back of refrigerator. Rotate
while inserting the tube until the flat surface of inlet tube is tight against the
back of the refrigerator.
6Secure the water inlet tube to the back of the refrigerator with two self-drilling
screws (provided).
7Squeeze together and slide the tube clamp over the fill tube. While still
squeezing the clamp, insert one end of the plastic tube into the fill tube as far
as it will go, then slide the clamp downward to capture the fill tube in place.
CAUTION: Leaks may result if the plastic tube is not pushed in as far as it can go
and the tube clamp is not in place over the fill tube.
Fill tube
Water supply tube
Tube clamp
8www.insigniaproducts.com
8Insert the two ice maker mounting screws into the holes in the freezer wall.
Turn each screw clockwise five times.
9Use needle nose pliers to remove the terminal cover located at the top of the
freezer by first pulling down one side of the cover, then pulling down the
other side. Save the terminal cover for future use in case the ice maker is
removed.
Ice maker mounting
screws
Terminal
Terminal cover
9
Ice Maker
www.insigniaproducts.com
10 With the ice maker in one hand, plug the wiring harness connector into the
terminal located at the top of the freezer panel. Make sure that the connection
is tight. Make sure that the wiring harness is still in the hook on the back of ice
maker.
11 Mount the ice maker onto the two ice maker mounting screws you installed in
step 8. Make sure that the water inlet tube is sitting inside the fill cup, then
tighten the screws.
Wiring harness connector
Terminal
Ice maker mounting
screws
Fill cup
Water inlet tube
10 www.insigniaproducts.com
12 Adjust the leveling bracket to level the ice maker. The ice maker is level when
the gap between the freezer wall and the ice maker is the same at the top and
bottom.
13 With the ice maker level, insert the third ice maker mounting screw at the
bottom of the ice maker and tighten.
14 Reinstall the freezer shelf and set the ice storage bin on the shelf.
Ice maker
Screws
Leveling bracket
Ice storage bin
Tabla de contenidos
Otros manuales de Máquina de hielo de Insignia
