Inovance MD290 Series Manual de usuario

User Guide

MD290 Series AC Drive

(500‒630 kW)

MD290 Series AC Drive User Guide

Shenzhen Inovance Technology Co., Ltd.

Add.: Building E, Hongwei Industry Park, Liuxian Road, Baocheng No. 70 Zone, Bao’an District, Shenzhen

Tel: +86-755-2979 9595

Fax: +86-755-2961 9897

Service Hotline: 400-777-1260

http: //www.inovance.com

Suzhou Inovance Technology Co., Ltd.

Add.: No. 16 Youxiang Road, Yuexi Town, Wuzhong District, Suzhou 215104, P.R. China

Tel: +86-512-6637 6666

Fax: +86-512-6285 6720

Service Hotline: 400-777-1260

http: //www.inovance.com

A04

Data code 19010376

User Guide

Preface

- 1 -

Preface

Thank you for purchasing the MD290 series AC drive developed by Inovance.

It is a general-purpose AC drive mainly used for controlling and adjusting the speed and

torque of three-phase AC asynchronous motors. MD290 provides user-programmable

features and software tool monitoring and communication bus functions, delivering

rich and powerful combined functions and stable performance. It can be used to drive

textile, papermaking, drawing, machine tools, packaging, foods, fans, water pumps and

other automated production equipment.

Product appearance

■First use

Read this user guide carefully if you use the AC drive for the 󶍾rst time. For any doubt on

its function or performance, contact our technicians for help.

■Standards compliance

The following table lists the certi󶍾cations and standards that the product may comply

with. For details about the acquired certi󶍾cates, see the certi󶍾cation marks on the

product nameplate.

Name Directive Name Standard

CE certi󶍾cation

EMC directive 2014/30/EU EN 61800-3

LVD directive 2014/35/EU EN 61800-5-1

RoHS directive 2011/65/EU EN 50581

TUV certi󶍾cation - EN 61800-5-1

UL certi󶍾cation -UL61800-5-1

C22.2 No.14-13

Preface

- 2 -

Appllicant Suzhou Inovance Technology Co., Ltd.

AC Drive

Model MD290 series

Made In China

Manufacturer

Suzhou Inovance Technology Co.,Ltd.

Ａ급기기（업무용 방송통신기자재）

이 기기는 업무용(Ａ급) 전자파적합기기로서 판매자

또는 사용자는 이점을 주의하시기 바라며,가정외의

지역에서 사용하는 것을 목적으로 합니다.

■Adjusting drive parameters

The drive when it leaves the factory with default settings should enable the user to get

started quickly to check on the basic mechanical running conditions. At a later time,

󶍾ne tuning to optimize the operation/performance can be undertaken.

Such parameter tuning should be done by quali󶍾ed personnel who have prior training

on Servo Drives. Some parameter settings can have adverse reactions if manipulated

incorrectly and care should be taken especially during the commissioning startup

stages to prevent personnel from engaging the machine.

This user guide provides a complete list of the parameters with functional description

and care should always be taken whenever parameters are adjusted during a live

running startup. Inovance and Authorized Distributors can provide product training and

if in doubt seek advice.

Revision History

- 3 -

Revision History

Date Version Change Description

November 2015 V0.0

◆Related 󶍾rmware version: F7-10 = U29.06 and F7-11 =

U29.15

September 2016 A01

◆Added large power rating data.

◆F7-10 = U29.07 F7-11 = U29.16

November 2016 A02

◆Modi󶍾ed Approvals, designation rule and nameplate

data.

November 2017 A03

◆Added data of the 0.4 to 15 kW models.

◆Deleted data of the MDKE7 operating panel and added

data of the MDKE9 operating panel.

July 2019 A04

◆Changed the structure of the user guide.

◆Added data of the three-phase 200 to 240 V models in

the following sections:

1) 1.1 Nameplate and Model Number

2) 1.3 Technical Data

3) 1.4 Overall Dimensions

4) 2.4 Selection of Cables, Breakers, and Contactors

5) 2.5 Selection of the AC Output Reactor

6) 2.6 Selection of Braking Components

7) 3.1.2 Backplate Mounting and Through Hole Mounting

(Note: The three-phase 200 to 240 V models include

MD290-2T0.4G/0.7PB to MD290-2T55G/75P.)

◆Added data of cables that comply with UL certi󶍾cations

in "2.4 Selection of Cables, Breakers, and Contactors".

◆Added model selection data of braking components in

"2.6 Selection of Braking Components".

◆Updated Inovance's logo.

■User guide and acquisition

This user guide is shipped with the product. For any additional order, contact your sales

representative.

This user guide brie󶍿y introduces product information, installation and wiring,

troubleshooting, and routine maintenance. For more details, see 19010321 MD290

Series AC Drive Advanced User Guide.

To obtain the user guide, access Inovance's website (

http://www.inovance.com

), click

"Download", search for the user guide by its name, and then download the PDF 󶍾le.

Safety Instructions

- 4 -

Safety Instructions

Safety Precautions

1) Before installing, using, and maintaining this equipment, read the safety

information and precautions thoroughly, and comply with them during operations.

2) To ensure the safety of humans and equipment, follow the signs on the equipment

and all the safety instructions in this user guide.

3) "CAUTION", "WARNING", and "DANGER" items in the user guide do not indicate

all safety precautions that need to be followed; instead, they just supplement the

safety precautions.

4) Use this equipment according to the designated environment requirements.

Damage caused by improper usage is not covered by warranty.

5) Inovance shall take no responsibility for any personal injuries or property damage

caused by improper usage.

Safety Levels and De󶍾nitions

DANGER

indicates that failure to comply with the notice will result in severe

personal injuries or even death.

WARNING

indicates that failure to comply with the notice may result in severe

personal injuries or even death.

CAUTION

indicates that failure to comply with the notice may result in minor

personal injuries or damage to the equipment.

Safety Instructions

Unpacking

CAUTION

◆Check whether the packing is intact and whether there is damage, water seepage, damp,

and deformation.

◆Unpack the package by following the package sequence. Do not hit the package with

force.

◆Check whether there are damage, rust, or injuries on the surface of the equipment or

equipment accessories.

◆Check whether the number of packing materials is consistent with the packing list.

Safety Instructions

- 5 -

WARNING

◆Do not install the equipment if you 󶍾nd damage, rust, or indications of use on the

equipment or accessories.

◆Do not install the equipment if you 󶍾nd water seepage, component missing or damage

upon unpacking.

◆Do not install the equipment if you 󶍾nd the packing list does not conform to the

equipment you received.

Storage and Transportation

CAUTION

◆Store and transport this equipment based on the storage and transportation

requirements for humidity and temperature.

◆Avoid transporting the equipment in environments such as water splashing, rain, direct

sunlight, strong electric 󶍾eld, strong magnetic 󶍾eld, and strong vibration.

◆Avoid storing this equipment for more than three months. Long-term storage requires

stricter protection and necessary inspections.

◆Pack the equipment strictly before transportation. Use a sealed box for long-distance

transportation.

◆Never transport this equipment with other equipment or materials that may harm or

have negative impacts on this equipment.

WARNING

◆Use professional loading and unloading equipment to carry large-scale or heavy

equipment.

◆When carrying this equipment with bare hands, hold the equipment casing 󶍾rmly with

care to prevent parts falling. Failure to comply may result in personal injuries.

◆Handle the equipment with care during transportation and mind your step to prevent

personal injuries or equipment damage.

◆Never stand or stay below the equipment when the equipment is lifted by hoisting

equipment.

Installation

WARNING

◆Thoroughly read the safety instructions and user guide before installation.

◆Do not modify this equipment.

◆Do not rotate the equipment components or loosen 󶍾xed bolts (especially those marked

in red) on equipment components.

◆Do not install this equipment in places with strong electric or magnetic 󶍾elds.

◆When this equipment is installed in a cabinet or 󶍾nal equipment, protection measures

such as a 󶍾reproof enclosure, electrical enclosure, or mechanical enclosure must be

provided. The IP rating must meet IEC standards and local laws and regulations.

Safety Instructions

- 6 -

DANGER

◆Equipment installation, wiring, maintenance, inspection, or parts replacement must be

performed by only professionals.

◆Installation, wiring, maintenance, inspection, or parts replacement must be performed

by only experienced personnel who have been trained with necessary electrical

information.

◆Installation personnel must be familiar with equipment installation requirements and

relevant technical materials.

◆Before installing equipment with strong electromagnetic interference, such as a

transformer, install an electromagnetic shielding device for this equipment to prevent

malfunctions.

Wiring

DANGER

◆Equipment installation, wiring, maintenance, inspection, or parts replacement must be

performed by only professionals.

◆Never perform wiring at power-on. Failure to comply will result in an electric shock.

◆Before wiring, cut o󶍽 all equipment power supplies. Wait at least 10 minutes before

further operations because residual voltage exists after power-o󶍽.

◆Make sure that the equipment is well grounded. Failure to comply will result in an

electric shock.

◆During wiring, follow the proper electrostatic discharge (ESD) procedures, and wear

an antistatic wrist strap. Failure to comply will result in damage to internal equipment

circuits.

WARNING

◆Never connect the power cable to output terminals of the equipment. Failure to comply

may cause equipment damage or even a 󶍾re.

◆When connecting a drive with the motor, make sure that the phase sequences of the

drive and motor terminals are consistent to prevent reverse motor rotation.

◆Wiring cables must meet diameter and shielding requirements. The shielding layer of the

shielded cable must be reliably grounded at one end.

◆After wiring, make sure that no screws are fallen and cables are exposed in the

equipment.

Safety Instructions

- 7 -

Power-on

DANGER

◆Before power-on, make sure that the equipment is installed properly with reliable wiring

and the motor can be restarted.

◆Before power-on, make sure that the power supply meets equipment requirements to

prevent equipment damage or even a 󶍾re.

◆At power-on, unexpected operations may be triggered on the equipment. Therefore, stay

away from the equipment.

◆After power-on, do not open the cabinet door and protective cover of the equipment.

Failure to comply will result in an electric shock.

◆Do not touch any wiring terminals at power-on. Failure to comply will result in an electric

shock.

◆Do not remove any part of the equipment at power-on. Failure to comply will result in an

electric shock.

Operation

DANGER

◆Do not touch any wiring terminals during operation. Failure to comply will result in an

electric shock.

◆Do not remove any part of the equipment during operation. Failure to comply will result

in an electric shock.

◆Do not touch the equipment shell, fan, or resistor for temperature detection. Failure to

comply will result in heat injuries.

◆Signal detection must be performed by only professionals during operation. Failure to

comply will result in personal injuries or equipment damage.

WARNING

◆Prevent metal or other objects from falling into the device during operation. Failure to

comply may result in equipment damage.

◆Do not start or stop the equipment using the contactor. Failure to comply may result in

equipment damage.

Maintenance

DANGER

◆Equipment installation, wiring, maintenance, inspection, or parts replacement must be

performed by only professionals.

◆Do not maintain the equipment at power-on. Failure to comply will result in an electric

shock.

◆Before maintenance, cut o󶍽 all equipment power supplies and wait at least 10 minutes.

Safety Instructions

- 8 -

WARNING

◆Perform daily and periodic inspection and maintenance for the equipment according to

maintenance requirements and keep a maintenance record.

Repair

DANGER

◆Equipment installation, wiring, maintenance, inspection, or parts replacement must be

performed by only professionals.

◆Do not repair the equipment at power-on. Failure to comply will result in an electric

shock.

◆Before inspection and repair, cut o󶍽 all equipment power supplies and wait at least 10

minutes.

WARNING

◆Require repair services according to the product warranty agreement.

◆When the equipment is faulty or damaged, require professionals to perform

troubleshooting and repair by following repair instructions and keep a repair record.

◆Replace quick-wear parts of the equipment according to the replacement guide.

◆Do not operate damaged equipment. Failure to comply may result in worse damage.

◆After the equipment is replaced, perform wiring inspection and parameter settings again.

Disposal

WARNING

◆Retire equipment by following local regulations or standards. Failure to comply may

result in property damage, personal injuries, or even death.

◆Dispose of or recycle retired equipment by following industry waste disposal standards

to avoid environmental pollution.

Safety Instructions

- 9 -

Safety Signs

■Description of safety signs in the user guide

Read the user guide before installation and operation.

Reliably ground the system and equipment.

Danger!

High temperature!

Prevent personal injuries caused by machines.

High voltage!

**min

Wait xx minutes before further operations.

■Description of safety signs on the equipment

For safe equipment operation and maintenance, comply with safety signs on the

equipment, and do not damage or remove the safety labels. The following table

describes the safety signs.

Safety Sign Description

◆Read the user guide before installation and operation.

Failure to comply will result in an electric shock.

◆Do not remove the cover at power-on or within 10 minutes

after power-o󶍽.

◆Before maintenance, inspection, and wiring, cut o󶍽 input

and output power, and wait at least 10 minutes until the

power indicator is o󶍽.

Otros manuales para MD290 Series

Tabla de contenidos

Otros manuales de Accionamiento de CC de Inovance

Inovance

Inovance MD520 Series Manual de lista de piezas

Inovance

Inovance Aonarch MD500L Series Manual de usuario

Inovance

Inovance IS620N Series Manual de usuario

Inovance

Inovance MD500-PLUS Series Manual de usuario

Inovance

Inovance MD800 Series Manual de usuario

Inovance

Inovance MD800 Series Manual de uso y cuidado

Inovance

Inovance MD380 Series Manual de usuario

Inovance

Inovance MD380 Series Manual de usuario

Inovance

Inovance MD380 Series Manual de usuario

Inovance

Inovance MD330 Manual de usuario

Inovance

Inovance MD200 Manual de usuario

Inovance

Inovance MD520 Series Manual de usuario

Inovance

Inovance MD330H Manual de usuario

Inovance

Inovance MD520 Series Manual de uso y cuidado

Inovance

Inovance MD290 Series Instrucciones de montaje

Inovance

Inovance MD380L Manual de instrucciones

Inovance

Inovance CP700 Series Manual de usuario

Inovance

Inovance MD810 Series Manual de usuario

Inovance

Inovance MD200 Manual de usuario

Inovance

Inovance MD800 Series Manual de usuario

Inovance

Inovance CS500 Manual de usuario

Inovance

Inovance MD500-PLUS Series Guía de inicio rápido

Inovance

Inovance AM600 Series Manual de usuario

Inovance

Inovance MD520 Series Instrucciones de instalación

Manuales populares de Accionamiento de CC de otras marcas

Vincent Associates

Vincent Associates UNIBLITZ ED12DSS Manual de usuario

EKSMA OPTICS

EKSMA OPTICS DQ-100-4 Manual de lista de piezas

Chamberlain Garog

Chamberlain Garog D Series Manual de usuario

Parker

Parker PDS Series Manual de usuario

Festo

Festo DGC G Series Guía de configuración

Binks

Binks QS-5012-1-CE Manual de usuario

Danfoss

Danfoss VLT 2800 Series Hoja de especificaciones

ABB

ABB ACQ580-01 Series Manual de instalación

YASKAWA

YASKAWA CANopen SI-S3 Manual de usuario

GE D20A6 Manual de usuario

Unex

Unex MC-D-250-1000-050W-TW Manual de usuario

Geckodrive

Geckodrive G213V Manual de usuario

ABB

ABB RSYC-01 Manual de usuario

Rockwell Automation

Rockwell Automation PowerFlex 700S Manual del propietario

WEG

WEG DeviceNet CFW500 Manual de usuario

Siemens

Siemens SINAMICS G Hoja de datos

Siemens

Siemens SINAMICS SM150 6SL3815-7NP41-0AA1 Instrucciones de funcionamiento

SOMFY

SOMFY JR RU 30 Manual de usuario