InnooTech JSK-30 Manual de usuario
Contents
Important Safeguards
Features
Benefits
Device Pretest
Operation
Recommended Program
Care and Cleaning
Troubleshooting
Technical Specifications
1
2
2
2
4
4
5
5
LED Daylight Lamp
JSK-30
2-4
READ ALL INSTRUCTIONS BEFORE USING
Important Safeguards
Important Safeguards
!DANGER:
!WARNING:
!CAUTION:
To avoid electrocution, do not operate this device near water.
Close supervision is recommended when these lamps are used by or near children, or others
who may not understand the need for these precautions.
Do not operate lamp in close proximity to flammable or combustible vapors, such as aerosol
spray products, or where oxygen is being administered.
To prevent risk of shock or personal injury when cleaning lamp, make sure you have turned
off and unplugged the lamp and allowed sufficient time for the lamp to cool.
Do not shorten or cut the power cord.
Certain medications(e.g., anti-depressants) and diagnosed mental health conditions may
induce light light sensitivity, which may result in discomfort, hyperactivity, or hypomania.
Consult with your health care provider before using this product.
If you have a pre-existing eye condition or are at risk of developing Age-related macular
degeneration or other eye related conditions,it is recommended that you consult with your
healthcare provider before using this product.
Some people experience light sensitivity to bright strong light or upon an over-exposure to
bright strong light. Discontinue use immediately if you experience any discomfort.
This product is intended for indoor use only.
Avoid placing this product in areas that are exposed to direct sunlight or in close proximity to
heat-radiating products. Do not place this product on the top of other appliances which
radiate heat. Protect the power cord of this product,in all of its parts from being damaged in
any way.
Do not use this product if it has been damaged in any way. For example, the power supply
cord or plug have been damaged; liquid has been spilled on any of its surfaces; objects have
fallen onto this product; the product itself has sustained damage due to external forces such
as being hit or dropped, been exposed to rain or moisture etc.
Do not disassemble this product. There are no user-serviceable parts in this lamp.
Only use the power plug adaptor, cord and connector supplied with your LED therapy lamp.
If other power sources, plugs, adapters, cords and connectors are used, damage to your
product or its power supply may occur.
This product may cause interference with radios, cordless telephones or other devices that
use a wireless remote control, such as television sets. If any interference occurs, move the
product away from those devices and connect it to a different power outlet, out of sight from
the remote control receiver.
Unplug this product during lighting storms or when it has been in use for long periods of time.
Avoid placing this product in areas that are dusty; humid/moist; lack ventilation; are places
where constant vibration occurs.
This product is not to be used with any kind of light dimmers, timers, motion detectors,
voltage transformers or extension cords.
Do not leave this product unattended during use.
Never cover this product or place anything on the top of it when it is in operation.
Do not run the power cord of this product on objects or the top of it. Always place it behind
this product.
Do not use solvents or cleaners containing any abrasive materials，or ammonia-based
cleaners on this product.
After cleaning the lamp, all moisture should be properly wiped away and dried completely
before it is connected to the power supply.
1
Features
Benifits
Which delivers natural light to your home，office，dorm room or apartment.
Which cures your body's own energy enhancers to make you more alert and productive.
Which has up to 10，000 LUX bright Full Spectrum light.
Is designed with a compact shape and small holder to make it easy to place in a convenient
location，or hang on the wall.
Permits a customized session, with stepless light settings, stepless or 3 Level color temperature
setting from 3000K to 6500K , and four time settings.
Your new daylight lamp is an remarkable product with various features and benefits. lt:
2
Device Pretest
Operation
Insert the power jack connector end of the AC/DC adaptor into the power cord receptacle
located on the back of the lamp. Then,connect the AC/DC adaptor to an AC outlet.
Note:Do not run the power cord of this product over or place objects on top of it.
Always place it behind this product.
To help determine if you have a sensitivity to strong light, we recommend that you perform
this pretest before the first use of this product:
Step1- Turn on the lamp and position it about 18 inches from your face (do not look directly
into the lamp).
Step2- Operate the lamp for approximately 10 minutes and turn it off. If the light has caused
any discomfort, stop using it and consult a doctor immediately. If you have not
experienced any discomfort,you may consider gradually decreasing the distance from
the lamp while also increasing the use time.This will result in more light intensity and a
greater effect. For your initial sessions, you should monitor the degree of any discomfort
and accordingly adjust both the time you use the product for and its location and
proximity.
1.Instructions for use:
The use of this product consists of siting close to the light therapy lamp with your eyes open.
While staying oriented toward the light, feel free to engage in other activities such as reading.
Writing,hobbies and crafts, sewing, needlepoint, applying make-up or working at your computer
or desk.
The lamp provides a broad spectrum of strong
light , which stimulates all of the eye's
Photoreceptors:
Cones, rods, and melanopsin. The lamp operates
with photopic light which primarily stimulates the
cones of the eye as well as scotopic light,which in
turn primarily stimulates the rods.Reducing the size
of the pupil, this product relaxes the eye, providing
a comfortable
sensation of rest. Melanopsin helps set the body's
daily cycles and bring them back in their natural
order,
being triggered by the full spectrum light.
Rods
Rods
Cones
Balanced Broad
Spectrum Light
Well-stimulad photoreceptrs
Smaller Lens -
Focused Light Rays
Press the switch on the side to turn on the lamp.
The lamp should be positioned as close as 6 inches,
but within24 inches of your face and should be slightly
off-center (see diagram).
consider using the lamp onthe high settinginthe
morning and onthe low settingintheafternoon.
Note: Do not look directly into the lamp.
2.Light Intensity, Color Temperature and Timer Setting
3
Color temperatureTimer Light intensity
ON/OFF
Care and Cleaning
Recommended Program
Researchers at the National Institute of Health demonstrated that white light,in a range of2,500
to 10,000 LUX (a measurement of light intensity), helped to reverse the symptoms of Winter
Blues.
Exposure affects people differently. We all have different reactions to our environment. It is
important to establish a distance and schedule that is comfortable for you. We recommend
you use the light regularly and at about the same time each day.
It is not necessary to sit in front of the lamp continuously. you can divide the time into several
mini-sessions. Continue to use the daylight lamp daily to feel an improvement in your
mood and activity level.
When you are feeling sluggish and lethargic, spend more time with the light, sit closer to it or
increase light intensity. If you feel a sort of edginess, as though you have consumed too much
coffee, it may be time to turn off the unit or reduce the intensity of the light.
Your product is made from high-quality materials that will last for many years with minimum
care. you may want to periodically clean the lamp using a mild nonabrasive cleaner and soft
cloth. When cleaning, always make sure you have turned off and unplugged the unit and
allowed sufficient time for the unit to cool.
WARNING:To prevent risk of shock or any personal injury when cleaning your product, always
make sure you have turned off, unplugged it from the power sources and allowed sufficient
time for the product to cool down.
CAUTION:Clean only with a soft dry cloth - do not use solvents or cleaners containing abrasives
or ammonia.
After cleaning this product, all moisture should be properly wiped away and dried completely
before it is connected to the power supply.
30 Minutes
to
1hour/day
4
Adjust Color temperature of lamp:
Stepless mode:Touch and hold the switch until the desired Color temperature Change from
3000k warmlight color to 6500k whitelight color.
Adjust brightness of lamp:
5level mode:Press the switch lightly to select the color temperature from 1250lux，
2300lux, 4200lux, 6500lux, 7100lux.
working time setting:
Tap the switch to select time 15min,30min,45min,60min.
Note:The Light will turn on all the time if do not tap the timer switch.
Make sure all power connectors, cords, and plugs are inserted fully and securely.
Make sure there is power to the wall outlet, or try another outlet-one that is not connected
to a dimmer.
Model:
Size:
Adapter:
Power:
Light Intensity:
Color Temperature:
Timer:
JSK-30
240*146*17mm
Input:110-240V
10.03W
10CM/10000LUX
3000~6500K
15min,30min,45min,60min
Thank You!
5
Trouble shooting
Technical Specifications
Tabla de contenidos
Manuales populares de Luz exterior de otras marcas
Lindby
Lindby 9949029 Manual de usuario
HEPER
HEPER DOGO Side LW6048.585-US Instrucciones de instalación y funcionamiento
HEPER
HEPER LW8034.003-US Instrucciones de instalación y funcionamiento
Maretti
Maretti VIBE S 14.6080.04.A Manual de usuario
BEGA
BEGA 84 253 Manual
HEPER
HEPER MINIMO Instrucciones de instalación y funcionamiento
LIGMAN
LIGMAN BAMBOO 3 Manual de usuario
Maretti
Maretti TUBE CUBE WALL 14.4998.04 Manual de usuario
Maxim Lighting
Maxim Lighting Carriage House VX 40428WGOB Manual de usuario
urban ambiance
urban ambiance UQL1273 Manual de usuario
TotalPond
TotalPond 52238 Manual de usuario
Donner & Blitzen
Donner & Blitzen 0-02661479-2 Manual de usuario