INNO INNOFlask 2.0 Manual de usuario

InnoFlask 2.0 Manual

INNOFlask 2.0

NO.

Front

Face avant

Vorderseite

Visone

Frontale

Enfrente

Frente

Microphone

Mikrofon

Mirofono

Microfono

Microfone

Right Side

Côté Droit

Rechte Seite

Lato Destro

Derecha

Lado Direito

LED

Pairing Button

Bouton de

couplage

Verbindungs-

Taste

Pulsante di

accoppiamento

Botón de

emparejamient

Botão de

emparelhamen

ON / OFF

Bouton

Marche/Arrê

Ein / Aus

Acceso /

Spento

La perilla de

alimentación

Ligar/Desligar

Vol + / Track >

Bouton

d'augmentati

on de volume

/ piste >

Lautstärke

hoch / Spure >

Volume

Su/Traccia ?

Volumen arriba

/ pista >

Incrementar/

Faixa >

Vol - / Track <

Bouton de

diminution

de volume /

piste <

Lautstärke

verringern /

Spur <

Volume basso

/Traccia <

Bajar volumen

/ pista <

Diminuir

volume / faixa

Left Side

côté gauche

Linke Seite

Izquierda

Lato sinistro

L1ado

esquerdo

Micro USB for

Charging

Micro USB

pour charger

Mikro USB für

Ladekabel

Micro USB

Micro UBB

Aux In

Entrée

auxiliaire

Aux Eingang

Aux in

Aux en

Entrada ux

ENGLISH

PAGE 1

INNO Device

INNO Flask

User Manual

Product Introduction

This wireless equipment has a possibility of mixing electric waves and cannot provide the services on life and safety

Thank you for purchasing INNO Device Bluetooth wireless Speaker. This product supports Bluetooth 2.1 and easy to

hand carry, to provide high quality sound by simplified control. From your Bluetooth devices, you can play your music

library to the product without connecting wires also by AUX cable. This product is targeting home-use (class B)

electromagnetic wave instrument and can be used in any place.

PAGE 2

Product Data

Name of Product Bluetooth wireless stereo Speaker

Model iNNOFlask 2.0

Power 5V DC +/- 5%, 1A

Size(without Cover) 138mm X 67mmX 24.4mm (W X D X H, without case)

Internal Battery 3.7V DC / 750 mAh Li-ion (play 10 hours)

Power

3W X 2 at 10% THD

Connection

Micro USB (Charging) / AUX Input (3.5mm)

Bluetooth Bluetooth V4.1, Class2, A2DP

Used Frequency 2.4 ~ 2.48 GHz

Proper Temperature

0 ~ 45 ℃

Manufacturer / Country

* Series models per colors: INBTS - FLASK(BK)

INBTS - FLASK(BL) INBTS - FLASK(OR) INBTS - FLASK(WH)

The life time of battery may decrease slowly by repeating charging and discharging cycles. Play time is based on 1/2

volume.

PAGE 3

Composition of Product

Contents of Box

• Product

• User Manual

• Micro USB Cable for charging

The USB Cable is not for telecommunication.

AUX Cable and power adaptor are not provided.

Front

Left

AUX IN

Micro USB

Right

White/Red LED

Power On/Off

Volume Up/ Track Up

Volume Down/

Case

==PAGE 4==

Before You Begin

This Product can provide you a music enjoyment by wireless stream audio contents from your mobile devices such as

smartphone, MP3 player tablet or PC. You can roam around the house, office or outdoor to listen great music since the

product has a rechargeable battery inside. Also, you can directly connect the devices using AUX line out. The device shall

support Bluetooth higher than ver.2.1 and A2DP.

Connecting Power and Charging

To charge battery, connect supplied USB cable to USB port of PC or DC adaptor with USB Port and the other end to

Micro USB Port of the right hand side of the Product.

From the connection, the internal battery will start to be charged.

The internal battery may not be fully charged when you first open the Product. Please full charge the battery before

use. Please use safety approved power adaptor.

==PAGE 5==

Operation and Indication

•Power Knob

Slide Knob: power On / Off

Sliding the knob up and down makes the system on and off. (It takes 2 sec to “On” after slide the knob.)

• Pairing Button

- Short press (0.5sec) : Pause and Play

- Press and hold more than 2sec: Enter to Pairing mode

- Press and hold more than 5sec: Enter to Device reset mode *1

*1 : If there is system error, use this function.

• Volume Up Button(+)

press shortly : Volume up

- Press and hold more than 1sec : Track up

• Volume Down Button(-)

press shortly : Volume down

- Press and hold more than 1sec : Track down

The volume control and track up/down control of system is also possible by a Bluetooth device that paired with the

system.

(using AVRCP function)

•Use of Microphone

The microphone is located behind the front grill of the InnoFlask. When connected to yopur Smartphone,

Just speak into the front grill.

• 4.1 BT Pairing

Pairing and connecting with a Bluetooth device.

1. Turn on the system

White LED will slowly (0.5Hz) blink and search for the paired device.

2. Press and hold the pairing button more than 2 sec to enter pairing mode. White LED will begin to blink fast (2Hz).

3. Select “INNO FLASK” shown on the list of the Bluetooth device.

If “INNO FLASK” does not appear on the device’s display, repeat from 2.

==PAGE 6==

• Un-pairing Bluetooth

power Off The product or deactivate Bluetooth wireless mode On your device.

• AUX source play back

- Connect your auxiliary source to the AUX-In jack on the right side of the Product with 3.5mm AUX cable.

• LEDs

White LED (Bluetooth indicator)

Power ON: Slow blinking (0.5Hz)

Wait pairing mode: Fast blinking (2Hz) Bluetooth paired: Always ON

Red LED

Battery in-charging: Always ON Battery low: LED flash 6times/1min Battery full charged: LED off

Bluetooth Device reset: LED flash 5times

• Tone sound

When power On: ‘Bebebebeep’ tone up.

When power Off: ‘Bebebebeep’ tone down.

When a Bluetooth device paired: ‘Bebebeep’ tone up

• Set a speaker unit with the case as show in the figure.

INNO Flask Case

==PAGE 7==

Safety Instructions

As with general electronic product, precautions should be observed during handling and use.

• Read this instruction carefully and keep it. Heed all warnings and follow the instruction.

• Do not use the Product near water.

• Clean only with dry cloth.

• Do not block front or rear grilles.

• Do not install near any heat sources such as stoves.

• Protect the power (USB) cable from pressing by heavy substances or pulled by excessive power.

• Only use on horizontal and flat place.

• Unplug the Product during lightning storms or when unused for long periods of time.

• Contact a designated AS center when the power (USB) cable damaged, spilling liquid on Product, exposing Product to

rain for long time, serious damage on Product by dropping it.

• Keep away magnetic recording devices from the Product as there may be a small amount of magnetic flux leakage.

• Only use under 50℃of environment to prevent any damage to built-in battery.

==PAGE 8==

• Do not dispose of in the household waste, as the product contains a built-in battery and should be treated and

disposed

according to regulations on waste disposal.

• Sudden movement from clod to hot environment may cause moisture condensing on the Product and degrade system

performance and decrease product life span.

• Protect product from direct sun light.

• Do not use solvents to clean the Product and keep away from dusty environment.

• Do not attempt to disassemble the Product.

• AC adaptor is not supplied with the Product. Damages caused by improper power adaptors is not compensated.

• Always leave sufficient space around the Product for ventilation. Do not place Product in or on a bed, in a bag that

may prevent

air flow through vent openings.

• Don’t place lighted candles, cigarettes, etc. on the Product.

• Be care that heavy objects do not fall into the Product.

• To completely disconnect the power input, the USB cable should be disconnected from the Product.

• Use of the Product in moderate climates.

Use under extreme temperature may degrade system performance and product life span.

==PAGE 9==

Certification Information and Warnings

FCC ID : 2ACFTBT1505FNEX

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device

may not

cause harmful interference, and (2) this device must accept any interference received, including interference that may

cause

undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of

the FCC

Rules. These limits are designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and

used in

accordance with the instructions, may cause harmful interference to radio communications. However, there is no

guarantee that

interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning

the

equipment off and on, the user is encouraged to try to correct the interference by one of the following measures;

==PAGE 10==

• Reorient or relocate the antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

CE168

CE statement

Hereby, we declare that this device is in compliance with the essential requirements and other relevant provision of

directive 1999/

5/EC.

Declaration of Conformity

We hereby declare that all essential radio test suites have been carried out and that this device is in conformity to all

the essential

requirement of Directive 1999/5/EC. To which this declaration relates, is in conformity with the following standards

and/or other

normative documents.

==PAGE 11==

• Article.3.1.(a)

EN 60950-1: 2006+A11: 2009+A1:

2010+A12: 2011

EN 62479: 2010

• Article.3.1.(b)

ETSI EN 301 489-1 V 1.9.2

ETSI EN 301 489-17 V 2.2.1

EN 55013: 2013

EN 55020: 2007 / A11: 2011

• Article.3.2

WARNING: This equipment may generate or use radio frequency energy. Changes or modification to

this equipment may cause harmful interference unless the modifications are expressly approved in the instruction

manual. The

user could lose the authority to operate this equipment if an unauthorized change or modification is made.

==PAGE 12==

WARNING: This product contains magnets which can be harmful to pacemaker wearers.

Certified Company : INNO Device Co., Ltd.

Product Name : Wireless Equipment with

specified small power.

Model : Series of BT1505FNEX

Manufacturer/Country : INNO Device Co., Ltd. / China

(Translation of Caution box):

The lightning flash and arrowhead within the triangle is a warning sign alerting you of "dangerous voltage" inside the

product.

Caution. Risk of electric shock. Do not open.

Caution : to reduce the risk of electric shock, do not remove cover (or back). No user-serviceable parts inside. Refer

servicing to

qualified service personnel.

The exclamation point within the triangle is a warning sign alerting you of important instructions accompanying the

product.

See marking on Bottom/Back of Product

Warning : To prevent fire or electrical shock hazard, do not expose the product to rain or moisture.

==PAGE 13==

Troubleshooting

Q: The Product is not turned on.

A: Make sure built-in battery is fully charged.

Check that the USB cable is not damaged and USB port of adaptor or PC is normal.

Q: The Product is not charged.

A: Make sure the USB cable, plug is not damaged.

Check the USB cable is connected to PC or adaptor USB

Q: No sound or sound is very low.

A: Make sure the Bluetooth wireless connection is correct and playback has been successfully started.

Make sure the volume on your Bluetooth device is turned up.

Q: Paired device can not reconnect to the Product.

A: Delete “INNO FLASK” from the list on your Bluetooth device. Repeat the pairing procedures again.

A re-connection may fail due to the pairing information has been deleted from your Bluetooth device.

Note in some device you may be prompted to enter a passkey. The passkey is “0000”. This can be different for different

devices.

==PAGE 14==

Warranty

INNO Device Co., Ltd. warrants to the original retail buyer of this product, under normal use and condition, be proven

the defective in material or workmanship within 12 month from the date of original purchasing. But the warranty for

built-in battery is for 6 month.

Such defect will be repaired or replaced at designated AS center without charging cost.

To obtain proper repair or replacement within the terms of this warranty, the product to be returned with proof of

warranty coverage (e.g. dated bill of sale) or visit the AS center with them. If the defective is proven as a user’s

responsibility, the cost of delivery and repair can be charged.

This warranty does not extend to the problem of compatibility with user’s device nor the problem by using abnormal

adaptor or

cable. Also it does not apply to the problem by mis-handling, waterlogged or by removal of the factory labels or

disassembled by

non-qualified person.

Company’s liability is limited to the purchase price paid by purchaser for the product.

INNO Device

www.innodevice.com

==PAGE 15==

This warranty gives you specific legal rights and it may vary by regions. This warranty can not be moved nor transferred

to the

other person.

BEFORE AS CLAIM

Properly pack your unit including supplied accessories. We recommend using the original packing materials when you

return the product to AS center.

The copyright of the product is owned by HAJEN Co., Ltd. Without HAJEN’s permission, it can not be copied, modified,

transferred

nor saved. Note the copyright and trademark not to be transformed to electric, mechanical, chemical, magnetic, optical

or any

other artificial media.

USE AND RESPONSIBILITY

The contents within this publication can be changed by HAJEN for improvement of internal design, operation,

performance or

reliability without prior notice. HAJEN has no responsibility on inevitable, direct, indirect and accompanying injuries by

faults or

omission of this publication

==PAGE 16==

INNO Device Co., Ltd

402 USpace 1A

670 Sampyeong-dong, Bundang-gu Seongnam Korea

TEL : +82 31 724 2590

Cs : +82 31 724 2591

FAX : +82 31 724 2594

E-mail : [email protected] www.innodevice.com

DEsIGN BY INNO California Manufactured in China

주이노디바이스

경기도 성남시 분당구 삼평동670유스페이스1A 402호

TEL : +82 31 724 2590

Cs : +82 31 724 2591

FAX : +82 31 724 2594

E-mail : [email protected] www.innodevice.com

DEsIGN BY INNO California Manufactured in China

Tabla de contenidos

Manuales populares de Oradores de otras marcas

argon audio

argon audio IE20 Manual de usuario

Denon

Denon SC-N7 Manual de usuario

Gemline

Gemline Ace 3952 Manual de usuario

Focal

Focal ON WALL 300 Manual de instrucciones

HEADRUSH

HEADRUSH Maximus HRSP 5024 Manual de usuario

SoundLogic

SoundLogic BCCS-6/6395 Manual de usuario

Peavey

Peavey DTH 218 Manual de usuario

Avantree

Avantree Pluto Air Manual de usuario

Morel

Morel Integra Series INTEGRA OVATION 4 Manual de usuario

Oppo

Oppo SONICA Manual de usuario

Bose

Bose SoundLink Wireless Music System Manual de usuario

Rocksteady

Rocksteady Stadium Manual de usuario

Bowers & Wilkins

Bowers & Wilkins 4 Manual de usuario

Sonance

Sonance SONOS OUTDOOR Series Manual de usuario

Electro-Voice

Electro-Voice EVID FM4.2 Manual de usuario

Pioneer

Pioneer XW-HTD630 Manual de usuario

Onn

Onn BWA16AA002 Manual de usuario

HP GL313AA - USB Speakers PC Multimedia Manual de usuario

INNO iNNOFlask 2.0 Manual de usuario

Manuales populares de Oradores de otras marcas