Ink Bird ITH-20R-O Manual de usuario
RESET
Wireless
Temperature
Humidity
Sensor with
WiFi Gateway
USER MANUAL
Please keep this manual properly for reference. You can also
scan the QR code below to visit our official website for product
instructions. For any usage issues, please feel free to contact us
Scan to Download the Manual
This combination of ITH-20R-O Wireless Temperature-Humidity Sensor and
IBS-M2S WiFi Gateway allows you to remotely monitor the sensor tempera-
ture and humidity through gateway networking, check historical data and
receive timely alarm notifications.
01 Overview
IBS-M2S WiFi Gateway (receiver) :
Input Voltage: AC 100~240V 50/60Hz
Maximum Wireless Connection Distance: up to 300 feet without
interferences (Interferences will limit transmission)
Number of ITH-20R-O Sensors Supported: up to 10 sensors at the same
time
02 Technical Specifications
ITH-20R-O Wireless Sensor (transmitter) :
Battery：2* AAA 1.5V
Transmission Distance：up to 300 feet without interferences
(Interferences will limit transmission)
Temperature Measurement Range：-40℃~70℃ (-40℉~158℉)
Temperature Display Accuracy：0.1℃ (0.1℉)
Temperature Measurement Accuracy：±0.3℃ (±0.5℉)
Humidity Measurement Range：0% ~100%
Humidity Measurement Accuracy：±3%
Humidity Display Accuracy：0.1%
Temperature-Humidity Sampling Period：10 sec
Warranty: 1 year
IBS-M2S WiFi Gateway ITH-20R-O Wireless Sensor
03 Product Diagram
RESET
Wireless Sensor
Transmission
Signal Indicator
IBS-M2S WiFi Gateway
04 Key Definitions
RESET
WiFi Indicator
WiFi Button
RESET Button
WiFi Button:
Press and hold the WiFi button
for more than 5 seconds to reset
WiFi and pair it with the network
again.
Reset Button:
Press and hold the Reset button
for more than 5 seconds to reset
the registration of all sensors.
The user should take out the
battery of the sensor and
reinstall it, then bring the sensor
close to the IBS-M2S WiFi
Gateway to re-establish the
connection and complete the
registration.
ITH-20R-O Wireless Sensor
TX Button:
Short press the TX button to send temperature
and humidity data to the indoor receiver. After
sending successfully, the red light on the
transmitter will flash once.
05 APP Installation & Connection
Search the INKBIRD App from Google Play or
App Store to get it for free, or you can scan the
QR code left to download it directly.
5.1 INKBIRD APP
5.2 Registration
Step1: Registering an account is necessary before using the INKBIRD app
for the first time.
Step2: Open the app, select your Country/Region, and a verification code
will be sent to you.
Step3: Enter the verification code to confirm your identity, and the
registration is complete.
NOTES:
1.Your iOS devices must be running iOS 12.0 or above to download the app
smoothly.
2.Your android devices must be running android 7.1 or above to download
the app smoothly.
3.The device supports a 2.4GHz Wi-Fi router only.
4. APP Location Permission Requirement: We need to obtain your location
information to discover and add nearby devices. INKBIRD promises to keep
your location information strictly confidential. And your location information
will only be used for the location function of the App and will not be
collected, used, or disclosed to any third party. Your privacy is very
important to us. We will abide by relevant laws and regulations and take
reasonable security measures to protect your information security.
5.3.1 Open the app, click “+”, and
choose the IBS-M2S to start the
connection.
5.3 How to Connect
Open the INKBIRD app and Click “+” on the top right corner to add a device.
Then, follow the app instructions to complete the WiFi connection. Note
that the device should be as close as possible to the smartphone and
router during the connection process.
5.3.2 Plug in the gateway, power it
on, and click Next Step.
Plug into the power supply,
and keep the device powered on.
Plug into the power supply,
and keep the device powered on.
5.3.3 Select a WiFi network to
connect, enter the password, and
click Next Step.
5.3.4 Press and hold the
button until the WiFi indicator light
flashes and enters the pairing
state, then click Next Step.
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Accesorios de Ink Bird
