InFocus INF5520 Manual de usuario
009-1420-00
*009-1420-00*
PhotoBooth Setup Guide
IMPORTANT NOTES
PhotoBooth is a combination of various manufacturer items, such as the camera and light. Please read all
manufacturer documentation BEFORE following these instructions. Pay particular attention to all safety
and regulatory information contained therein.
InFocus is not liable for damage or injury caused by improperly using these items.
Trademark information
Apple, Mac and Facetime are trademarks or registered trademarks of Apple, Inc. Microsoft, Windows,
PowerPoint, Excel and Word are trademarks or registered trademarks of Microsoft Corporation. The
SDXC logo is a trademark of SD-3C, LLC. Canon and Rebel are trademarks or registered trademarks of
Canon Inc. D-Lite It and Elinchrom are trademarks or registered trademarks of Elinchrom LTD. Kaiser is a
trademark or registered trademark of Kaiser Fototechnik GmbH & Co.KG. Chimera is a trademark or
registered trademark of Chimera Lighting. Avenger and Manfrotto are trademarks or registered
trademarks of Lino Manfrotto + co. Spa. Lowel is a trademark or registered trademark of Lowel Light
Manufacturing. Vello, Freewave, and Impact are trademarks or registered trademarks of Gradus Group
LLC.
InFocus, In Focus, INFOCUS (stylized) and Mondopad are either registered trademarks or trademarks of
InFocus Corporation in the United States and other countries. All other trademarks are the property of
their respective owners. Any other trademarks, service marks, personal names or product names are
assumed to be the property of their respective owners and are used only for reference. There is no
implied sponsorship, affiliation, certification, approval or endorsement if we use one of these terms.
Contents
IMPORTANTNOTES............................................................................................................................................1
Trademarkinformation......................................................................................................................................1
Contents............................................................................................................................................................2
AccessoryIdentification.....................................................................................................................................3
PhotoBoothAssembly........................................................................................................................................5
PhotoBoothPCModuleInstallation..........................................................................................................................5
PreparingtheFlashUnit............................................................................................................................................5
AttachingtheFlashUnit............................................................................................................................................8
AttachingthePivotArm..........................................................................................................................................10
PreparingtheCamera.............................................................................................................................................11
PreparingtheWirelessTrigger................................................................................................................................13
TakingaPhotoBoothPhoto...............................................................................................................................14
FramingImages.................................................................................................................................................15
AddingNewFrameFilestoMondopad..............................................................................................................18
Accessingadditionaldocumentation.................................................................................................................20
Troubleshooting................................................................................................................................................21
Accessory Identification Page 3
Accessory Identification
Speed Ring
Super Clamp Half Pole
18-30” (46-74cm)
Pivot Arm
with Camera
Bracket
Softbox
L-Bracket
Sync Cord
Hot Shoe
Canon
®
EOS Camera
Kit
Wireless Remote
Shutter Kit
Flash Unit Kit
Mondopad™
Mobile Cart
Canon
®
AC
Adapter Kit
Page 4 Accessory Identification
The accessories which you receive depend upon the part number you ordered:
INF-5520-PB-C INF-PBKit-NOMP
AC Adapter Kit X X
Camera Kit X X
Flash Unit Kit X X
Half Pole X X
Hot Shoe X X
L-Bracket X X
Pivot Arm X X
Mondopad** X
Mondopad Mobile Cart X
Mondopad PC with
Photobooth Software
installed**
X X
Remote Shutter Kit X X
Softbox X X
Speed Ring X X
Super Clamp X X
Sync Cord X X
** Not shown on previous page.
PhotoBooth Assembly Page 5
PhotoBooth Assembly
PhotoBooth PC Module Installation
If you ordered INF-PBKit-NOMP, you will need to follow these instructions to replace your
Mondopad PC. Otherwise skip to the next section.
1. Locate the Mondopad PC module on the back of the Mondopad panel.
2. Rotate the two antenna connectors counter-clockwise and disconnect them. Set them aside
in a safe place.
3. Using the security allen wrench which was included with your Mondopad, remove the two
security screws on the top and bottom of the PC module.
4. Using the PC handle, carefully pull out the PC module.
5. Insert the new PC module and tighten the screws.
6. Re-attach the antennas.
Preparing the Flash Unit
1. Disconnect the cap from the flash unit by sliding the blue “lock” slider button to the unlocked
position and rotating the cap counterclockwise and lifting up.
Page 6 PhotoBooth Assembly
2. Attach the speed ring to the flash unit by aligning the slots of the speed ring to the front of
the flash unit and turning clockwise until it is fully attached. Move the blue “lock” slider button
to the locked position.
3. Route the cables into each corner of the softbox.
PhotoBooth Assembly Page 7
4. Insert the cable ends into the speed ring.
5. Secure the Velcro at each corner of the softbox to complete its rectangle shape.
Page 8 PhotoBooth Assembly
NOTE: If your mobile cart does not have holes drilled into it as per below, please contact
InFocus Support at: www.infocus.com/support.
Attaching the Flash Unit
1. Attach the L-bracket to the back of the Mondopad mobile cart.
2. Attach the Mondopad panel to the mobile cart as per the manufacturer’s instructions and the
INF-MOBCART addendum located on the InFocus Support site (Direct link:
https://portal.infocus.com/support/Product%20Pages/downloads.aspx?mic=INF5520&on=do
wnloads).
PhotoBooth Assembly Page 9
3. Attach the flash unit to the half pole using the knurled clamp screw. Tighten securely.
4. Slide the half pole onto the L-bracket and adjust as needed.
5. Adjust the half pole above the Mondopad panel, allowing room for the camera.
6. Adjust the angle of the flash unit and softbox to accommodate the camera and your
situation, using the flash unit tilt head.
7. Plug the power cord into the flash unit and route through the mobile cart post.
8. Plug the other end of the power cord into a power strip or power outlet.
Knurled Clamp Screw
Tilt Head
Otros manuales para INF5520
4
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Tableta de InFocus
