InFocus LitePro 610 Guía de instalación
1
INTRODUCTION
The In Focus Systems LitePro®610 and 620 multimedia projec-
tors combine powerful and sophisticated features with easy-to-
use, intuitive controls. Built-in multimedia features include high-
fidelity stereo audio by JBL™, a palette of 16.7 million colors and
Digital Light Processing™ (DLP) technology. The 600 series pro-
jectors are ideal for high-performance business, training and
imaging applications thatdemand exceptional color quality. The
610 has VGA graphics, the 620 has SVGAgraphics. The user
interfaces of the two products are identical; information in this
User’s Guide applies to both products.
Image Resolution
LitePro 610
The VGA resolution of the projected image of the 610 is 640x480.
The projector displays computer images that are 640x480 or
lower just as they appear on your computer’s monitor. Screen
resolutions between640x480 and 800x600 are compressed to
640x480. The projector cannot compress screen resolutions above
800x600. If your computer’s screen resolution is higher than
800x600, reset it to a lower resolution before you connect the pro-
jector.
LitePro 620
NOTE: The 620 automatically
expands 640x480 images to
800x600. You can display these
images at 640x480 by turning off
the Auto Resize feature.See “Auto
Resize” on page 37 for more
information.
TheSVGAresolution of the projected image of the 620 is800x600.
The projector displays computer images that are 800x600 or
lower just as they appear on your computer’s monitor. Screen
resolutions between800x600 and 1024x768 are compressed to
800x600. The projector cannot compress screen resolutions above
1024x768. If your computer’s screen resolution is higher than
1024x768, reset it to a lower resolution before you connect the
projector.
2
Introduction
Compatibility
The projector is compatible with a wide variety of computers and
video devices, including:
•IBM-compatible computers, including laptops, up to 800x600
resolution (LitePro 610) or 1024x768 resolution (LitePro 620) at
60Hz.
•IBM PS/2 in VGA and MCGA modes.
•Apple Macintosh and PowerBook computers up to 800x600
resolution (LitePro 610) or 1024x768 resolution (LitePro 620).
•Various VCRs, camcorders and laser disc players.
The projector is not compatible with these systems:
•IBM-compatible computers in CGA or EGA graphics mode.
•Macintosh 128, 512, Plus, SE, SE/30 or Classic.
Unpacking the Projector
The projector comes with theparts shown in Figure 1. Check to
make sure all are included. If any parts are missing, contact your
In Focus dealer immediately.
If you are experienced in setting up presentation systems, use the
LitePro 610/620 Quick Start card that was included in the shipping
box. For complete details on connecting and operating the projec-
tor, refer to the appropriatesections of this User’s Guide.
NOTE: The contents of your
shipping box may varydepending
on the LitePro 610/620
configuration you ordered.
3
FIGURE 1
Shipping box contents
1. LitePro 610 or 620 projector 6. CableWizard
2. LitePro 610/620 User’s Guide 7. CableWizard computer cable
3. power cord 8. CableWizard mouse cable
4. remote and batteries 9. CableWizard audio cable
5. RCA audio/video (A/V) cable Not shown: Quick Start card,
remote cable
1
2
3
4
5
6
7
8
9
4
Introduction
Usage Guidelines
•Do not look directly into the projection lens when theprojector
is turned on. The bright light may harm your eyes.
•The top and bottom of the projector can be very hot to the
touch after use. Use extreme care or let it cool before lifting it.
•Do not block the grills at the front, side, top or bottom of the
projector. Restricting the air flow through the projector can
cause it to overheat and turn off.
NOTE: If the projector overheats
and turns off, you must wait 45
seconds before you attempt to
turn it back on.
•Handle the projector as you would any product with glass
components. Be especially careful not to drop it.
•Avoid leaving the projector in directsunlight or extreme cold
for extended periods of time. If this happens, allow it to reach
room temperature before use.
•Transport the projector in a vendor-approved hard or softcase.
Call your In Focus dealer for more information.
If You Need Assistance
The first place to look for help is in this manual. Be sure to check
theguidelines in “Troubleshooting” on page 45.
If this manual doesn’t answer your question, call your In Focus
dealer. You can also call In Focus Customer Service directly at
1-800-799-9911. Call between 6 a.m. and 5 p.m. PST, Monday
through Friday. In Europe, call In Focus inThe Netherlands at
(31) 23-5623200. In Singapore, call (65) 334-9005.
The In Focus World Wide Web address is http:\\www.infs.com.
Warranty
These products are backed by a limited one-year warranty. The
details of the warranty are printed at the back of this manual.
Longer term warranties can be purchased from your In Focus
dealer. Refer to page 54 for part numbers.
Otros manuales para LitePro 610
2
Este manual sirve para los siguientes modelos
1
Otros manuales de Proyector de InFocus
InFocus
InFocus LP330 Manual de usuario
InFocus
InFocus LASER PROJECTOR LP 540 Manual de usuario
InFocus
InFocus ScreenPlay 7210 Manual de usuario
InFocus
InFocus LP2980 Manual de usuario
InFocus
InFocus SP4800 Manual de usuario
InFocus
InFocus IN124STA Manual de usuario
InFocus
InFocus LP 850 Manual de uso y cuidado
InFocus
InFocus Work Big IN1100 Manual de usuario
InFocus
InFocus IN112x Manual de usuario
InFocus
InFocus LP500 Manual de usuario
InFocus
InFocus IN82 Instrucciones de instalación
InFocus
InFocus LP 120 Manual de usuario
InFocus
InFocus IN124STx Manual de usuario
InFocus
InFocus LS110 Manual de usuario
InFocus
InFocus Play Big IN83 Manual de usuario
InFocus
InFocus SP4805 Manual del sistema
InFocus
InFocus LP 740 LiteMount Manual de usuario
InFocus
InFocus Projector Manual de usuario
InFocus
InFocus X9 Manual de usuario
InFocus
InFocus IN5132 Manual de usuario
