InFocus INA-LC100 Manual de usuario
009-1689-02
INA-LC100
User Guide
Contents
Introduction 3
System Setup 4
Mounting 4
Connectivity 4
Remote Control 5
Registration 6
Basic Navigation 9
Using the remote and keyboard 9
Using the on screen keyboard 9
Using a mouse and keyboard 9
Document Viewer 10
Supported document types 10
Open document les 11
Document Viewer tools 12
Annotate the le 13
Annotation tools 15
Save the le 17
Share the le 17
Create a new folder 19
Delete les and folders 20
Cast (Wireless display) 21
LightCast 21
AirPlay 22
Miracast 23
Whiteboard 24
Navigation 24
Create a drawing object 24
Add text 25
Whiteboard tools 25
Save the whiteboard canvas 28
Save the whiteboard canvas to a USB thumb drive 29
Share the le 30
Open a new whiteboard canvas 30
Open a whiteboard le 30
Open a whiteboard le from a USB thumb drive 30
Browser 31
Navigation controls 31
Tools submenu 32
Save the le 34
Share the le 35
Settings 36
Network Settings 36
Device 37
System and Security 38
Accounts 39
Browser Preferences 40
Troubleshooting 41
Declaration of Conformity 43
Limited Warranty 44
Specications 47
Appendix 48
Access Point Setup 48
Port Requirements for AirPlay, Miracast, and LightCast Sender App 49
Page 3INA-LC100 User Guide
Introduction
LightCast is an easy to use set of applications designed to maximize the connectivity and interactivity
of your InFocus display.
Available features
Document reader
• Documents (doc, docx, ppt, pptx, pdf, txt, xls, xlsx)
• Pictures (bmp, jpg, jpeg, png)
• Videos (avi, v, mkv, mov, mpg, mp4, ts, wmv, 3gp)
Wireless display (AirPlay, LightCast, Miracast)
Whiteboard
Internet browser
Network control (if display is equipped with a wired network connector)
USB-A connectors which can be used for:
• USB storage device (such as a thumb drive, camera, or external hard drive)
• Touch device (such as a touchpad)
• Wireless USB keyboard/mouse
Current limit on both connectors is 1A.
Accessories
• International power cord with country-specic adapters
• Remote control (no batteries are included)
• HDMI cable
• Velcro strips (3)
• User manual
Page 4
System Setup
Mounting
If desired, the InFocus hub can be mounted to the back of the
display. To do so, attach the velcro strips onto back of hub per the
illustration. Then attach it to the back of display being careful
not to block display vents.
Note: When mounted to the back of the display, we recommend
using the display to control the InFocus hub instead of the remote.
Connectivity
1) Connect the LightCast hub to the desired devices per below. Note: To use all the LightCast fea-
tures, you must connect a mouse and keyboard to the LightCast hub, or connect the LightCast
hub to an InFocus touch display.
2) Turn on the InFocus hub when the indicator light is blue. The main menu appears in about 30
seconds.
Optional:
Connect USB cable
to InFocus touch
display
Router Power adapter
Ethernet cable
Connect to InFocus touch display
HDMI cable
Page 5INA-LC100 User Guide
Remote Control
Use the remote to control the LightCast hub. Note: To use all the LightCast features, you must con-
nect a mouse and keyboard to the LightCast hub, or connect the LightCast hub to an InFocus touch
display.
SE TU P
AP P
Remote key Description
Power: Click to turn on/o.
SET: Not functional on this model.
TV IN: Not functional on this model.
SETUP
SETUP: Click to access the
Settings options.
APP
APP: Not functional on this model.
VOL: Click to decrease/increase the volume.
Home: Click to get back the main menu.
Return: Click to return back to previous menu.
Navigation: Click to navigate
left/right/up/down, and click OK to conrm your selection.
Menu: Click to choose function menu of corresponding ap-
plication in video, music, photo and website.
Mouse: Click to use the navigation button as a mouse.
Number: Click to select a number.
Mute: Click to turn down the volume.
Backspace: Click to backspace the input.
Page 6
Registration
1) Turn on the LightCast hub.
2) Press the Source button on the remote or keypboard.
3) Navigate to LightCast.
4) Press the Enter/Select button on the remote or keyboard. The LightCast registration welcome
page displays.
5) Click the arrow.
Page 7INA-LC100 User Guide
6) Enter the information for registration using either a wireless keyboard/mouse (not included) or
the on screen keyboard and remote. Click the right facing arrow.
7) Use a keyboard/mouse or on screen keyboard and remote to rename the device. This is useful to
dierentiate between dierent displays that have LightCast enabled.
8) If equipped, the Wired LAN IP address is displayed.
9) After the local SSIDs are displayed, log onto a wireless network:
10) Highlight an SSID.
11) Press Select/Enter.
12) If the SSID is encrypted, enter the password.
Page 8
13) The word “Connected” displays below the SSID when the connection is made. A green check-
mark displays next to saved SSIDs.
14) If a software update is available, an update window displays. Click Update and follow the
prompts to complete the update process.
15) When registration is complete, the LightCast home page displays.
Page 9INA-LC100 User Guide
Basic Navigation
Using the remote and keyboard
1) Use the arrow keys to highlight items in LightCast.
2) Press the Select button on the remote or the Enter button on the display to select the high-
lighted item.
3) Press the Esc button on the remote to back out of the currently running item.
4) Press the Auto Image button on the remote or Auto button on the display to return to the
LightCast home screen.
Using the on screen keyboard
1) In the desired eld, highlight and click Select using the keyboard or remote.
2) The on screen keyboard is displayed.
3) Use the arrow keys to highlight characters.
4) Click Select when the correct character is highlighted.
5) After each eld is completed, highlight and click Done to go to the next eld.
Using a mouse and keyboard
1) Plug a mouse and keyboard into an available USB-A connectors on the display.
2) Use the mouse and keyboard as you normally would.
Tabla de contenidos
