InfiRay PT Series Manual de usuario
Dual-spectrum PT Network
Thermal Camera
Quick Start Guide
V1.0.0
Dual-spectrum PT Network Thermal Camera Quick Start Guide
I
Preface
The following is about the correct use of the camera. In order to prevent
danger and loss of property, please read this manual carefully before
using the camera and strictly follow it during use. Please keep the
manual properly after reading.
Overviews
This manual is suitable for dual-spectrum PT network thermal cameras.
This manual describes the installation steps, installation precautions and
basic operations of dual-spectrum PT network thermal cameras.
Symbol Description
The description of the symbols that appear in the document is as
follows.
Instruction
The instructions are an emphasis and supplement to the main
text.
Caution
Cautions indicates potential risks. If ignored, it may lead to
product damage, data loss, product performance degradation,
or unpredictable results.
Warning
Warnings indicates that low or medium potential risk is
existing. The ignorance of the warnings may lead to injury,
equipment damage, or business interruption.
Danger
Dangerous text indicates that there is a high potential risk. If
it is not avoided, a major risk of personal injury or even death
may be caused.
Dual-spectrum PT Network Thermal Camera Quick Start Guide
II
Important Safety Notice
Warnings
The local electrical safety standards should be rigorously followed in
the process of installation and usage.
⚫Please use power adapter which is produced by regular companies.
Please check whether the power is normal or not before starting the
camera. (Power supply requirements should comply with that on the
product labels.)
⚫In order to make emergency power off when necessary, please install
power-off equipment which is easy to use when installing the wires.
⚫Please protect power lines from being treaded or pressed, especially
the connecting points which are led from the plug, power socket or
other unit.
⚫Please make sure the camera is fixed firmly in case of being installed
on walls or ceilings.
⚫If the camera does not work normally, please contact the purchased
shops or factories. Do not disassemble or revise the camera in any
way (The manufacturing company is not responsible for problems
that are caused by unauthorized modification or maintenance.)
Cautions
⚫Please do not put the camera in damp, dusty, extremely hot or cold
places, or places with corrosive gas or unstable light.
⚫Please transport, use and store the camera within the allowable
humidity and temperature range.
⚫Avoid making the lens aiming at strong light (e.g. sun or laser),
otherwise the imaging sensor would be damaged.
Dual-spectrum PT Network Thermal Camera Quick Start Guide
III
⚫Please do not block the vents near the camera in case of heat
accumulated.
⚫Please use the factory packaging or materials of the same quality
when shipping the device.
⚫Please do not press, vibrate violently or soak the camera during
transportation, storage or installation.
⚫It is advised to use the camera with lighting protector.
⚫Soft dry cloth can be used to clean the camera. For the dirt difficult
to clean, please use soft cloth with little neutral detergent and then
wipe dry. Do not use volatile detergent like alcohol, benzene or
diluent, or strong and abrasive detergent, otherwise the camera
coating would be damaged and also the camera performance could be
degraded.
⚫The lens cover is optical device, so please do not touch directly or
wipe the cover. Soft brush or hairdryer can be used to blow the dust
away. For the grease or fingerprint, soft cloth can be used to wipe it
away. Cotton cloth or lens cleaning paper with cleaning solution can
be used to wipe repeatedly until it’s clean.
⚫Please revise the password promptly after logging in.
Instruction
⚫Please use the accessories or parts specified by the manufacturer and
have them installed and repaired by professional service personnel.
⚫Quality requirements for installation and maintenance personnel:
Personnel should have the qualification certificate or experience to
engage in the installation and maintenance of video surveillance
systems, and have the qualification to engage in related jobs (such
Dual-spectrum PT Network Thermal Camera Quick Start Guide
IV
as high-altitude operations, etc.), in addition to the following
knowledge and operating skills.
Equipped with basic knowledge and installation skills of video
surveillance system and its components.
Equipped with basic knowledge and operating skills of low-voltage
wiring and low-voltage electronic circuit wiring.
Equipped with basic network security knowledge and skills, and
have good acknowledge of this manual.
⚫Requirements for lifting equipment:
Safe lifting equipment suitable for site and method of camera
installation.
The lifting equipment is able to reach enough height of installation
position.
The lifting equipment has good safety performance.
Dual-spectrum PT Network Thermal Camera Quick Start Guide
V
Table of Contents
1. Camera Introduction ....................................................- 1 -
1.1 Camera Description................................................... - 1 -
1.2 Camera Features........................................................ - 1 -
1.3 Camera Appearance .................................................. - 2 -
1.4 Cable Instructions...................................................... - 3 -
1.5 Alarm Interface Connection...................................... - 4 -
2. Camera Installation ...................................................... - 4 -
2.1 Instructions before Installation ................................. - 4 -
2.2 Cable Planning and Wiring....................................... - 4 -
2.3 Mounting Bracket...................................................... - 5 -
2.4 TF Card Installation .................................................. - 6 -
2.5 PT Installation........................................................... - 7 -
2.6 Install Network Port Protective Cover...................... - 8 -
3. Operation Guide............................................................ - 9 -
3.1 Preparations............................................................... - 9 -
3.2 Login System............................................................. - 9 -
3.3 Main Interface Description ..................................... - 11 -
Appendix A Camera Maintenance .................................- 12 -
Appendix B Operating Distance .....................................- 13 -
Dual-spectrum PT Network Thermal Camera Quick Start Guide
- 1 -
1. Camera Introduction
1.1 Camera Description
The dual-spectrum PT network camera is a thermal imaging network
camera that integrates remote monitoring in all-weather conditions, video
services and high-definition camera functions. In addition to the basic
visible light imaging, the camera also comes with a thermal imaging
channel, which can more comprehensively collect the characteristic
information of the measured scene while realizing dual-light shooting. It
can be widely used in indoor and outdoor scene monitoring, perimeter
prevention, fire warning integration and other fields of smart security.
1.2 Camera Features
⚫With the latest InfiRay® 12μm IR thermal imaging detector, the thermal
camera can make farther and clearer images.
⚫With a maximum thermal imaging resolution of 1.3 megapixels and a
35x 4 megapixel visible light camera，high-definition dual-spectrum
imaging can be achieved.
⚫Support 75mm fixed-focus and 25～75mm continuous zoom infrared
lens, which can meet various inspection needs.
⚫Support network high-definition transmission, which can transmit visible
light videos and infrared videos at the same time.
⚫Combining multiple network monitoring methods, the camera also
supports ONVIF protocol.
⚫With high-speed, high-precision pan-tilt, the network camera supports 5
scanning methods and 17 scanning track with speed memory;
Dual-spectrum PT Network Thermal Camera Quick Start Guide
- 2 -
⚫Support smart fire detection to meet the requirements of forest fire
protection and smart fire protection
⚫Support intelligent infrared video analysis, including intelligent analysis
functions such as regional intrusion, trip wire, etc.
⚫IP66
1.3 Camera Appearance
Figure 1.1 Appearance and Interface of Dual-spectrum PT Network
Thermal Camera
Dual-spectrum PT Network Thermal Camera Quick Start Guide
- 3 -
1.4 Cable Instructions
The cable includes interfaces for power, alarm, audio, RS-485, and network,
etc. Please see the following figure for interface instructions.
Figure 1.2 Cable Instructions
⚫P1 power interface (AC24V): Support AC 24V power supply.
⚫P2 ground interface (GND): Ground interface.
⚫P3 network interface (LAN): Output network signal and connect to
standard Ethernet cable.
⚫P4 RS-485 interface (485):RS485 interface for PT control.
⚫P5 video interface (BNC): Output standard PAL analog videos.
⚫P6 alarm output (ALARM OUT): Output alarm switch signal to alarm
equipment.
⚫P7 alarm input (ALARM IN): Receive the switch signal from the
external alarm source.
⚫P8 audio output (AUDIO OUT): Output audio signal to speakers and
other equipment for sound output.
⚫P9 audio input (AUDIO IN): Input audio signal and connect
microphone for receiving linear analog audio signal to collect sounds.
Dual-spectrum PT Network Thermal Camera Quick Start Guide
- 4 -
1.5 Alarm Interface Connection
The camera can be connected with alarm signal (0～DC5V) input and
switch output (no voltage). An external power supply is required when
connecting the alarm. The specific wiring method is shown in the figure
below.
Figure 1.3 Alarm Output Wiring Method
2. Camera Installation
2.1 Instructions before Installation
⚫Before installation, please make sure that the camera in the package is in
good condition and all parts are complete.
⚫Before installing the PT, please prepare in advance the tools and cables
that may be required for installation.
2.2 Cable Planning and Wiring
It is necessary to survey and plan the lines in advance since the
environment and location of the PT installation is different, and then to
arrange the lines precisely so as to provide safe and stable power and
wiring for the PT. In the process of cable planning and wiring, you need to
Este manual sirve para los siguientes modelos
3
Tabla de contenidos
Otros manuales de Cámara térmica de InfiRay
InfiRay
InfiRay Tube Series Manual de usuario
InfiRay
InfiRay AT20 Manual de usuario
InfiRay
InfiRay TianXuan M Series Manual de usuario
InfiRay
InfiRay AT Series Manual de usuario
InfiRay
InfiRay AT300 Series Manual de usuario
InfiRay
InfiRay AT Series Manual de usuario
InfiRay
InfiRay Xclip Manual de usuario
InfiRay
InfiRay M200 Series Manual de usuario
InfiRay
InfiRay ITSII 300 Manual de instrucciones
InfiRay
InfiRay CLIP NV Series Manual de usuario
InfiRay
InfiRay XTHERM II Manual de usuario
InfiRay
InfiRay iRay RH25 Manual de usuario
InfiRay
InfiRay S Series Manual de usuario
InfiRay
InfiRay Clip CH50 V2 Manual de usuario
InfiRay
InfiRay ZOOM ZL38 Manual de usuario
InfiRay
InfiRay AT1280H Series Manual de usuario
InfiRay
InfiRay AT20 Manual de usuario
InfiRay
InfiRay Night Vision Go Manual de usuario
InfiRay
InfiRay P Series Manual de usuario
InfiRay
InfiRay T Series Manual de usuario
