Infinite Peripherals SCP-10 Manual de usuario
SC
P
-
1
0
Signature Capture Pad
User’s Manual
. . . . . . . . . . . . . . . . . . . .
Infinite Peripherals, Inc.
www.ipcprint.com
SCP-10 User’s Manual v1.03
. . . . . . . . . . . . . . . . . . . .
Infinite Peripherals, Inc.
www.ipcprint.com Page 2
SCP-10 User’s Manual v1.03
Legal notice
The Bluetooth®word mark and logos are owned by the Bluetooth SIG, Inc.
and any use of such marks by Infinite Peripherals is under license.
Contents
Contents...............................................................................................2
. . . . . . . . . . . . . . . . . . . .
Infinite Peripherals, Inc.
www.ipcprint.com Page 3
SCP-10 User’s Manual v1.03
Technical Data.....................................................................................4
Box Contents.......................................................................................5
Getting Started ....................................................................................6
About Your SCP-10.............................................................................7
Charging the SCP-10...........................................................................8
Status & Operating Modes .................................................................9
Reset...................................................................................................10
Clear Last Paired Device ..................................................................11
Compatible Devices..........................................................................12
Attaching Device...............................................................................13
Bluetooth®Setup...............................................................................14
BlackBerry Bluetooth®Setup...........................................................15
Adding Signature Capture Pad..........................................15
Searching for Signature Capture Pad...............................16
Entering Passkey................................................................17
Replacing Battery..............................................................................18
Developing Solution..........................................................................19
Troubleshooting................................................................................20
Federal Communications Commission...........................................21
Contact Information..........................................................................23
. . . . . . . . . . . . . . . . . . . .
Infinite Peripherals, Inc.
www.ipcprint.com Page 4
SCP-10 User’s Manual v1.03
Technical Data
Feature Specifications
Touch panel
Input Method Coordinates , Time and Pressure data capturing
Screen Resolution 256 x 192 points
Display 2 x 16 Alphanumeric LCD display
Audible Indictors Internal buzzer
Visual Indicators 2 Two-color LEDs
Supports PDA devices with USB - Blackberry,
Palm & Pocket PC
Mini USB Host
Interface Supports USB “HOT SYNC” (“active SYNG”)
(optional)
Wireless Interface Bluetooth®Interface (optional) - CLASS 2, 10m
max, RFCOMM
Rechargeable Li-ION battery 3.7V / 900mAh
internal power supply
Power Necessary time to full battery charge – 4 hours
(no PDA device is connected)
Active mode - 25h (30 - 35mA)
Battery Life
Bluetooth®communication mode - 9h (100mA)
Dimension 93mm (L) X 64mm (W) X 18mm (H)
Weight ~ 90 grams with battery
Drivers & Software Drivers & Software Development Kit (SDK) is
provided
- Operating -10°C to +45°C / 10 ÷ 90 % RH;
Environment - Storage -25°C to +70°C / 10 ÷ 90 % RH.
Table 1
Box Contents
Your IPC SCP-10 comes with the following items listed below:
Item Part
Number Descriptions Image
1 SCP-10 SCP-10 Signature Pad
2 - USB-to-Mini USB charging
cable
3 - User's manual
4 - CD with software
Table 2
Software ( Drivers & SDK ):
Because of the continually evolving Driver & SDK to support new devices,
the latest Drivers & SDK are distributed online and is available for
download at our website indicated below. For details on using the SCP-10
Drivers & SDK, please refer to the SDK’s documentation.
For the latest SCP-10 Drivers & SDK’s, visit our developer web site at:
http://www.ipcprint.com/support/default.asp
. . . . . . . . . . . . . . . . . . . .
Infinite Peripherals, Inc.
www.ipcprint.com Page 5
SCP-10 User’s Manual v1.03
. . . . . . . . . . . . . . . . . . . .
Infinite Peripherals, Inc.
www.ipcprint.com Page 6
SCP-10 User’s Manual v1.03
Getting Started
The SCP-10 allows you to capture signature information onto your PDA &
Smartphone. The following Quick Start guide will help to get your SCP-10
ready for use.
Quick Start:
Step What to do Purpose Where to find
information
1
Charge the
SCP-10
rechargeable
battery as
recommended
in this manual.
The internal
battery should be
fully charged
before first use to
ensure long battery
life.
Charging Battery,
Page 8
2 Setup
Bluetooth®
Pairing.
Setup Bluetooth®
pairing to allow
SCP-10 to
communicate with
Bluetooth®
devices.
Bluetooth®Setup,
Page 12
3 Install Signature
Capture
Software
To capture
signature
information onto
your device,
software needs to
be installed onto
your device.
Please contact your
SCP-10 reseller or
Infinite Peripherals
for Third-Party SCP-
10 solutions.
Developers should
refer to the section
on “Developing
Solutions”.
Table 3
About Your SCP-10
♦SCP-10 USB Overview
. . . . . . . . . . . . . . . . . . . .
Infinite Peripherals, Inc.
www.ipcprint.com Page 7
SCP-10 User’s Manual v1.03
On & Clear Screen Button
Charging LED
On LED
USB Charging Port
Strap Eyelet
USB Data Port
Figure 1
♦SCP-10 Bluetooth®Overview
On & Clear Screen Button
Charging LED
Strap Eyelet On LED
USB Charging Port
Figure 2
Charging the SCP-10
The SCP-10 uses a Lithium Ion rechargeable battery pack. Before first use,
the SCP-10 battery pack should be charged for at least 4 hours.
To prevent electrical damage to the SCP-10 and/or battery pack, please use
approved USB to Mini USB cables only.
. . . . . . . . . . . . . . . . . . . .
Infinite Peripherals, Inc.
www.ipcprint.com Page 8
SCP-10 User’s Manual v1.03
Solid RED = charging
Solid GREEN = fully charged (~4 hrs.)
USB Charging Cable
Connect to PC or to
BlackBerry Charger
Figure 3
Status & Operating Modes
The SCP-10 uses LEDs to indicate various conditions of operation.
Possible LED lighting indications may result from charging, active/online
status, or because of low battery. The following explains these conditions
and LED indication.
Figure 4
Charging LED
ON/OFF LED
On & Clear Button
Printer Status
Solid GREEN = Battery at full charge
Charging LED
Solid RED = Battery charging
Flashing once per second = Power ON
ON/OFF LED
Flashing once per second = Low
battery
Table 4
. . . . . . . . . . . . . . . . . . . .
Infinite Peripherals, Inc.
www.ipcprint.com Page 9
SCP-10 User’s Manual v1.03
Reset
To reset the SCP10 use a paper clip and insert into hole slightly pushing on
the reset button.
Figure 5
. . . . . . . . . . . . . . . . . . . .
Infinite Peripherals, Inc.
www.ipcprint.com Page 10
SCP-10 User’s Manual v1.03
Tabla de contenidos
