Infinite Peripherals Imperea Manual de usuario
Imperea
USER MANUAL
For iPhone® 6s / 7 / 8
User Manual | Imperea
2
Contact Information
Mobility Sales/ Technical Support Center
Innite Peripherals, Inc.
17681 Mitchell N
Irvine, CA 92614
Toll-Free: (877) 278-7860
Ofce: (949) 222-0300
Website: ipcmobile.com
Headquarters/ Main Warehouse
Innite Peripherals, Inc.
2312 Touhy Avenue
Elk Grove Village, IL 60007
Toll-Free: (800) 278-7860
Ofce: (847) 818-1260
Fax: (847) 818-1287
Compatible Devices
Legal Notice
“Made for iPhone” (MFi) means that an electronic accessory has been designed to connect specically to the iPhone and
has been certied by the developer to meet Apple performance standards. Apple is not responsible for the operation of this
device or its compliance with safety and regulatory standards. Please note that the use of this accessory with an iPhone may
affect wireless performance.
• iPhone 6s
• iPhone 7
• iPhone 8
Trademarks
Innite Peripherals, Mobilize Your Enterprise, Linea Pro, Innea, Innea Tab, and Innea Omni are trademarks of Innite
Peripherals, Inc. All other trademarks are the property of their respective owners.
iOS Compatibility
User Manual | Imperea
3
Table of Contents
Legal Notice 2
Compatible Devices 2
Trademarks 2
Overview 4
Features 4
Accessories 4
Technical Specifications 5
Physical Dimensions 5
Connectivity 5
Certificates 5
Environment 5
Box Contents 6
Getting Started 6
Product Description 7
Assemble Your Imperea 8
Dissemble Your iOS Device from Imperea 9
Charge Imperea with the Single Charging Station 10
Battery Status 10
Developing Applications 10
Programmable Options 11
Charging Current 11
Set Charging 11
Enable Scan Button 11
Scan Mode 11
Pass-Through Sync 11
Idle Time 11
Using Your Imperea 12
Scan Barcodes 12
Servicing the Imperea 13
Replacing the Battery 13
Troubleshooting 14
Warranty 15
Disclaimer 15
Product Returns and Servicing 15
Symbols 16
Federal Communications Commissions 17
User Manual | Imperea
4
Visit our website at https://ipcmobile.com or contact your Innite Peripherals account representative for additional
information about our current and future product accessories.
Overview
Imperea is a durable, camera-based scanning device for your iOS device. As a high-speed scanning device with IP67 rating
for dust and moisture protection to withstand industrial conditions, Imperea includes a smart battery and intuitive SDK for
software integration.
Features
Camera-Based Barcode Scanner
Camera scanning SDK enables your iOS device to scan
any barcode even if poorly printed or curved.
Supports 1D/2D, 2D, 2D stacked, and 2D matrix barcode symbols
Single Charging Station with Wireless Qi
Technology
The smart battery uses wireless Qi technology that
charges both the Imperea battery and iOS device
simultaneously.
Battery Status
Four LEDs illuminate the battery status indication on
the back of Imperea.
Accessories
Battery
User swappable, rechargeable battery with 2100mAh
capacity. Supports wireless charging.
User Manual | Imperea
5
Connectivity
Certificates
Environment
Barcode Scanner
Camera-based scanning enables your iOS device to scan
all barcodes in all environments
Reads 1D/2D, 2D stacked, GS1, and 2D matrix barcodes
Temperature
Operation: 0°C to +40°C (32°F to 104°F)
Storage: -20°C to +65°C (-4°F to 149°F)
Relative Humidity
Operation and Storage: 5%-90%
CE, FCC, MFI, ROHS, UN38.3 for battery
Drop test MIL-STD-810 (4-ft to concrete)
IP67 rating
Battery
User-replaceable, rechargeable Lithium-Polymer
battery
3.7V, 2100mAH, 3.7 supporting wireless Qi charging
Smart battery with real-time charging status and
battery health for better battery management
Power Adapter
Custom power adapter included with single station
wireless charger
12 volts, 1.5A, 18W
LED Indicators
Four programmable LEDs on back of unit illuminate
when battery status button is pressed
Battery status colors: Blue, Green, Red, Amber
Accessories
Single station wireless charger
Input Voltage
5 volts
Technical Specifications
Physical Dimensions
Compatibility
iPhone 6s / 7 / 8
Dimensions (L x W x H)
160mm x 76.6mm x 18.6mm (6.3” x 3.01” x 0.73”)
Weight
155.129g (5.472 oz.) without iOS device
Buttons
Three user-congured blue buttons in the application
for features such as push-to-talk, camera, and
messaging
Battery status button on the battery
All existing iOS device buttons are accessible
Audio/Visual
Apple iPhone speakers and microphone
Front and back camera
User Manual | Imperea
6
Box Contents
• Before using your Imperea, remove the unit and any included accessories from the shipping cartoon and verify the contents against the packing list.
• Retain all packing materials, invoice, and bill of lading. These may be required to return the device for servicing later, or to process a claim with the
shipping carrier.
• Carefully inspect the contents inside of the packaging for any signs of damage. If there are signs of damage, do not attempt to use the unit. Notify your
account executive or contact technical support at https://ipcmobile.com/devices.
• Ensure the battery is fully charged prior to initial use.
Your Imperea and case includes a single-station charger with power adapter and a battery inside the unit.
Imperea (1) Single Station Charger (1)
Note:
Box contents and SKUs vary based on your order conguration.
Getting Started
The following helps you get the Imperea ready for use:
What to do Section
Connect Imperea with your iOS device Assemble Your Imperea
Remove your iOS device from Imperea Disassemble Your iOS Device from Imperea
Fully charge battery before rst use Charge Imperea with a Single Charger
Software required to run Imperea with an iOS device Developing Applications
Operating the Imperea Using Your Imperea
Note:
The barcode scanning feature requires the installation of software. Contact your Innite Peripherals account representative for available software via our
SDK.
User Manual | Imperea
7
Product Description
Camera
scanner
Battery latch
4 LEDs
Mute Ringer
Volume Control
USB Type-A connector
Scan button
Right/Left sides
User Manual | Imperea
8
Assemble Your Imperea
1. Remove the Imperea from the box, and then carefully twist a penny or the ply tool inside the bottom notch.
2. Twist the coin along the metal inside bottom notch to release the snap ttings on the bottom of the cover.
3. After the cover is loose, pull the remaining snap ttings with the coin along the top cover.
4. Place the unit on a at surface, and then slide the iPhone downwards towards the Lightning™ connector.
5. Once the iPhone is engaged with the Lightning connector, gently press the iPhone onto the unit.
6. Ensure the iPhone is seated property and ush with the rubber seals.
7. Place the front cover onto the unit with the snaps fully engaged.
User Manual | Imperea
9
Dissemble Your iOS Device from Imperea
1. Remove the Imperea from the box, and then insert a penny horizontally into the bottom notch.
2. Press rmly and twist a penny along the metal inside the bottom notch to release the snap ttings on the bottom of the
cover.
3. Once the bottom part of the cover is loose, carefully pull on the remaining snap ttings along the top cover.
4. With the top cover removed, take the Imperea and locate the camera opening on the reverse side.
5. Through the camera opening, press gently on the iPhone to release it from the rubber enclosure.
6. Once the top iPhone is released, slide the iPhone upwards, removing it from the Lightning connector.
7. Gently snap the top cover into place for safekeeping.
User Manual | Imperea
10
Charge Imperea with the Single Charging Station
Battery Status
To check the battery status, open the application on your iOS device and view the data. Your iOS device must be connected to
the Imperea before you can check the battery status.
Note:
When the status is above 20%, set the automated charge functionality to automatically charge the iOS battery.
Developing Applications
Software is not provided with your Imperea. Please contact your reseller or Innite Peripherals for Third Party software
solutions. Integrating the Imperea into your iOS application requires the use of the Innite Peripherals Universal Software
Developers Kit (SDK).
The SDK incorporates an API specically for developing applications to use Imperea functionality.
For additional details on using the Innite Peripheral Universal SDK, please refer to the appropriate SDK documentation.
For the latest Innite Peripheral Universal SDK, please visit our developer portal at:
https://developer.ipcmobile.com
Use the included power adapter when charging Imperea with the single charging station. The charging time is approximately
3 hours and 30 minutes to charge a fully depleted unit.
• For the charger to perform effectively, use the power adapter provided.
• To prevent electrical damage to the unit and/or battery, only use an approved USB Type-A cable.
1. Plug the USB-A end of the charging cable into the provided adapter. The top LED ashes green.
Note:
To prevent damage to the unit, do not plug the cable into a USB port on a computer or other adapter.
2. Place the unit on a single station charger, lining up the bump on the base of the charger with the bottom notch on the
Imperea.
3. Ensure the unit is centered on the charger, and then wait to hear the charging beep.
• This signals the Qi charging is starting.
• The LED light on the station blinks green when the unit is charging.
Otros manuales para Imperea
2
Tabla de contenidos
Otros manuales de Accesorios para teléfonos celulares de Infinite Peripherals
Infinite Peripherals
Infinite Peripherals Imperea Manual de usuario
Infinite Peripherals
Infinite Peripherals Infinea X IX-I2DBTR-PH5-WH Manual de usuario
Infinite Peripherals
Infinite Peripherals CS-LP5-PG Manual de usuario
Infinite Peripherals
Infinite Peripherals CS-LP7I-PG Manual de usuario
Infinite Peripherals
Infinite Peripherals CBL-CUP-LP5PC-BK Manual de usuario
Infinite Peripherals
Infinite Peripherals Infinea X DF Manual de usuario
Infinite Peripherals
Infinite Peripherals Infinea X Manual de usuario
Infinite Peripherals
Infinite Peripherals Linea Pro 7 Manual de usuario
Infinite Peripherals
Infinite Peripherals Infinea X DF Manual de usuario
Infinite Peripherals
Infinite Peripherals Linea Pro 7 Manual de usuario
