Inficon 122 20 Guía rápida
Translation of the original operating instructions
Test leak for sniffer leak detection
lina80en1-07-(2004)
lina80en1-07-(2004)
Catalog No.
(Enumeration inside)
From software version
--
INFICON GmbH
Bonner Strasse 498
50968 Cologne, Germany
INFICON Table of Contents
Test-leak-sniffer-leak-detection-Operating-instructions-lina80en1-07-(2004) iii
Table of Contents
1 About this manual...............................................................................................4
1.1 General information ....................................................................................4
1.2 Intended use ...............................................................................................4
1.3 Basic safety instructions .............................................................................4
1.4 Warnings.....................................................................................................6
2 Description..........................................................................................................7
2.1 Calibrated test leak .....................................................................................7
2.2 Technical specifications..............................................................................8
3 Calibrating ........................................................................................................13
4 Cleaning and maintenance...............................................................................14
4.1 Cleaning the housing ................................................................................14
4.2 Maintenance .............................................................................................14
4.3 Sending for repair or maintenance ...........................................................15
5 Disposal............................................................................................................16
1 | About this manual INFICON
4 / 18 Test-leak-sniffer-leak-detection-Operating-instructions-lina80en1-07-(2004)
1 About this manual
1.1 General information
The calibration leak must only be operated in the proper
condition and in the condition described in the instruction
manual, and used by trained personnel.
Follow the local regulations for the use of the calibration
leak.
Follow the instructions in this document as well as the
operating instructions of the leak detector.
1.2 Intended use
The test leak, designed as a tabletop device, is used to
calibrate and check sniffer leak detectors, taking into
account the safety regulations. The test leak must be
adjusted to a room temperature of 20 °C at the place of
use 24 hours before use.
1.3 Basic safety instructions
• Observe the relevant protective measures when
handling the calibration gas used, see also safety
data sheets.
INFICON About this manual | 1
Test-leak-sniffer-leak-detection-Operating-instructions-lina80en1-07-(2004) 5 / 18
• The test leak is pressurized. Protect it from solar
heat, temperatures above 40 °C, and damage.
• Calibration gas: Avoid eye-contact and inhalation in
high concentrations.
• Share the security information with other users.
INFICON does not assume any responsibility and
warranty if the operator or third parties
• disregard this document
• use the product for purposes other than those for
which it was intended
• carry out interventions of any kind on the product
(conversions, modifications, etc.).
• Important instructions concerning technical safety
and industrial safety are highlighted by the following
markings.
1 | About this manual INFICON
6 / 18 Test-leak-sniffer-leak-detection-Operating-instructions-lina80en1-07-(2004)
1.4 Warnings
DANGER
Imminent hazard resulting in death or serious
injuries
WARNING
Hazardous situation resulting in potential death or
serious injuries
CAUTION
Hazardous situation resulting in minor injuries
NOTICE
Hazardous situation resulting in damage to property
or the environment
INFICON Description | 2
Test-leak-sniffer-leak-detection-Operating-instructions-lina80en1-07-(2004) 7 / 18
2 Description
2.1 Calibrated test leak
The calibrated test leak is installed in a rectangular
housing.
12
3
4
Fig.1:
Test leak without proof
1 Manometer 2 Date of calibration
3 Leak rate of the
calibrated test leak.
4 Calibration gas outlet
2 | Description INFICON
8 / 18 Test-leak-sniffer-leak-detection-Operating-instructions-lina80en1-07-(2004)
2.2 Technical specifications
Note that the pressure in the test leaks changes
depending on the temperature.
Smallest deviation from calibration ± 10 %
Cat. No. / Pressure range
122 20, 122 20S, 122 21, 122 21S,
122 22, 122 22S, 122 27, 122 28,
122 28S, 122 29, 122 29S, 122 31,
122 32, 122 33, 122 35, 122 36S,
122 37, 122 37S, 122 38, 122 39
0.5 bar to 7.5 bar
123 00, 123 01, 123 04, 123 05,
123 11, 123 20, 123 21, 123 22,
123 23, 123 24, 123 27, 123 28,
123 39
12275 0.5 bar to 60 bar
Temperature range +15°C to +35°C
(40-122 °F)
Storage temperature 0°C to +40°C
(40-122 °F)
Weight approx. 3.5 kg
INFICON Description | 2
Test-leak-sniffer-leak-detection-Operating-instructions-lina80en1-07-(2004) 9 / 18
WARNING
Highly flammable gases
► Keep gases that are marked with a flame symbol in the
following table away from ignition sources.
Refrigerant
Gas type Cat. no. Leak rate g/a Leak rate oz/y
R 134 a 122 20 2.0 - 5.0 0.07 – 0.18
R 134 a 122 20S 1.) 2.0 - 11.0 0.07 – 0.39
R 600 a 122 21 2.0 - 5.0 0.07 – 0.18
R 600 a 122 21S 1.) 2.0 - 20.0 0.07 – 0.71
R 404 a 122 22 2.0 - 5.0 0.07 – 0.18
R 404 a 122 22S 1.) 2.0 - 10.0
10.0 - 15.0
0.07 – 0.353
0.353 – 0.529
R152a 122 27 2.0 - 5.0 0.07 - 0.18
R 407 c 122 28 2.0 - 5.0 0.07 – 0.18
R 407 c 122 28S 1.) 2.0 - 10
10.0 - 15.0
0.07 – 0.353
0.353 – 0.529
R 410 a 122 29 2.0 - 5.0 0.07 – 0.18
2 | Description INFICON
10 / 18 Test-leak-sniffer-leak-detection-Operating-instructions-lina80en1-07-(2004)
Gas type Cat. no. Leak rate g/a Leak rate oz/y
R 410 a 122 29S 1.) 2.0 - 10.0
10.0 - 15.0
0.07 – 0.353
0.353 – 0.529
R 290 122 31 7.0 - 8.0 0.25 – 0.28
CO2 122 32 2.0 - 3.5 0.07 – 0.123
R1234 YF 122 35 2.0 - 5.0 0.07 – 0.18
R 32 122 36S 2.) 2.0 - 8.0 0.07 – 0.282
R 134 a 122 40 10.0 - 11.0 0.353 – 0.383
R 600 a 122 41 14.0 - 18.0 0.49 – 0.63
R 404 a 122 42 13.0 - 17.0 0.459 – 0.60
CO2 122 75 10 - 14 0.353 – 0.494
SF6 123 00 2.0 - 5.0 0.07 – 0.18
R 1234ze 123 01 2.0 - 5.0 0.07 – 0.18
R 245fa 123 04 2.0 - 5.0 0.07 – 0.18
R 452A 123 05 2.0 - 5.0 0.07 – 0.18
R 448A 123 11 2.0 - 5.0
10.0 - 15.0
0.07 – 0.18
0.353 – 0.529
R 452B 123 20 2.0 – 5.0 0.07 – 0.18
Otros manuales para 122 20
1
Este manual sirve para los siguientes modelos
33
Tabla de contenidos
Otros manuales de Equipo de prueba de Inficon
Inficon
Inficon E-Check Guía rápida
Inficon
Inficon MPG400 Manual de usuario
Inficon
Inficon ULTRATEST UL3000 Fab PLUS Manual de usuario
Inficon
Inficon MCT150 Manual de usuario
Inficon
Inficon 122 20 Manual de usuario
Inficon
Inficon TL3-5 Manual de usuario
Inficon
Inficon Quantus LP100 Manual de usuario
Inficon
Inficon 12329 Guía rápida
Inficon
Inficon FTC3000 Guía rápida
Inficon
Inficon TGF10 Manual de usuario
Manuales populares de Equipo de prueba de otras marcas
SMART
SMART KANAAD SBT XTREME 3G Series Manual de usuario
Agilent Technologies
Agilent Technologies BERT Serial Manual de usuario
Agilent Technologies
Agilent Technologies N3280A Manual de usuario
Vernier
Vernier Go Direct Voltage Manual de usuario
Lifeloc
Lifeloc R.A.D.A.R. Manual de usuario
Fluke
Fluke T5-600 Instrucciones de funcionamiento e instalación
