infa-secure WG101 Manual de usuario
Stroller
Assembly Instructions
For model(s)
WG101, WG102
IMPORTANT: READ THESE INSTRUCTIONS CAREFULLY BEFORE
USE. YOUR CHILD’S SAFETY MAY BE AFFECTED IF YOU DO NOT
FOLLOW THESE INSTRUCTIONS.
Service Phone: 02 4728 8090
Warnings
• This stroller is to be used for one child only.
• It is suitable for children from birth to approximately 36 months old
(up to a weight of no more than 17kg).
• Do not leave the harness buckled when not tted to a child in the
stroller because the harness can form loops which could be a
strangulation hazard.
• Regularly inspect, maintain and clean the stroller to ensure it stays
in good condition. Eg check that the harness straps are not frayed,
all buckle and locking devices work correctly, etc.
• Only use parts and accessories approved by the manufacturer.
• We do not recommend that this stroller is used on stairs or
escalators. If it is used on stairs or escalators then we recommend
that the child is removed and carried separately
• DO NOT use near an open re, exposed ame or excessive heat
source that may damage the stroller or injure the child.
• The brakes must always be applied when the stroller is not moving
or being used.
• This stroller is not suitable for running or jogging with.
• Ensure all locking devices are engaged correctly before use.
• Do not overload the basket (max 4.5kg)
• Do not allow your child to climb unassisted into or stand on the
stroller.
• This stroller is designed for use on at or gently sloping surfaces and
may be unstable or tip over on steep sloping and uneven surfaces.
• All folding mechanisms have a risk of nger traps. Please take care
not to leave ngers or parts of the body between moving parts
when folding and unfolding this stroller.
• Take care when carrying or lifting this stroller, do not carry it by the
fold release handle.
• When not in use, store in a safe place where it will not be damaged
by exposure to a wet/damp environment, excessive heat source,
etc. Also do not store heavy items on top of the stroller that may
damage it in any way.
WARNING
Warnings
A tether wrist strap is provided on the
handlebar. Slide your hand through the tether
wrist strap loop whenever you use the stroller.
Only remove your hand from the tehter strap
loop when the brakes have been applied to
the stroller wheels.
Use the tether wrist stap to prevent the stroller rolling away.
TO AVOID INJURY OR DEATH:
• ALWAYS APPLY THE BRAKES WHENEVER THE STROLLER IS
STATIONARY.
• DO NOT LEAVE CHILDREN UNATTENDED.
• SECURE THE CHILD IN THE HARNESS AT ALL TIMES.
• DO NOT CARRY EXTRA CHILDREN OR BAGS ON THIS
STROLLER.
• MAKE SURE CHILDREN ARE CLEAR OF ANY MOVING PARTS
IF YOU ADJUST THE STROLLER.
WARNING
WARNING
Do not use as a carry cot. Stroller can not be used in
positon below.
WARNING WARNING
Parts List 2
Carton Contents 3
Assembly
- Frame 4
- Wheels 4
- Seat Unit 5
- Hood 6
- Hood (Disassembly) 7
- Seat Attachment 7
- Handrail 7
- Harness 8
- Harness Detachment 8
Usage
- Seat to Sleeping Cot Conversion 9
- Handrail Function 10
- Harness 11
- Wheel Function 12
- Brakes 13
- Handlebar Function 13
- Seat Reclining Adjustment 14
- Reversible Seat 14
- Folding 15
Optional Accessories
- Rain Cover 17
- Mosquito Net 17
- Foot Cover 18
- Travel System 18
Care and Maintenance 19
Index
Drawings in this manual are for illustration purposes only;
actual product may vary. The manufacturer reserves the right to
change any specification or features without prior notice.
Parts List | 2
Parts List
(A) Adjustable Handle
Button
(B) Handle button
(C) Seat Height
Adjuster
(D) Handle Reversible
Adjustor
(E) Brake Controller
(F) Seat Supporting
Base
(G) 2nd Stroller
Folding Button
(H) Stroller-folding
Handle
(I) Rear Wheel
(J) Hood
(K) Front Handrail
(L) Front Handrail
Button
(M)Footrest Leg
(N) Front Wheel
Housing
(O) Front Wheel
Quick-Release
Button
(P) Front Wheel
Rotating Lever
(Q) Front Wheel
(R) Basket
(S) Stroller Strap
(T) Cot Adjuster Dial
(U) Cot Conversion Bar
G
J
F
HT
U
E
D
AB C
I
K
L
M
N
O
QRS
P
3 | Carton Contents
Carton Contents
Rear wheels x 2
Stroller Frame x 1
Front wheels x 2
Seat Unit x 1
Basket x 1 Foot Cover x 1* Mosquito Net x 1*
Optional Accessory
* supplied with some models
Rain Cover x 1*
Handrail x 1
Please check all parts are included in the carton; if there are any
missing parts, please contact the InfaSecure Service Department
on 02 4728 8090.
Assembly | 4
Assembly
Frame
12 3
4
Open the front legs in the direction of the arrow A. The frame is fully
opened when you hear a “click”. Lift up the handle as indicated B.
Wheels
1
4
2 3
A
B
A
B
5 | Assembly
Step 1. Assemble the front wheels then x the wheel axles into leg
housings as shown in 1and 2. It is xed when you hear a “click”.
Step 2. Assemble rear wheels and x the rear wheel axles into the rear
wheel housings as shown in 3and 4, it is xed when you hear a “click”.
Try to move and rotate all the wheels by hand to ensure all the
wheels are firmly fixed on wheel housing before use.
Seat Unit
12 3
Footrest Assembly
Step 1. Unfold the seat unit as indicated 1. Plug the footrest leg into the base
2. It is xed when you hear a “click” 3.
Seat Bottom Assembly
Fasten the hook-and-loop strips over the tube as shown 4, then
attach the harness anchors to the tube under the seat 5, 6. The seat
unit is now completely assembled.
45 6
1 2
3 4
1
2 3
4
5 6
Assembly | 6
Hood
457
12
E
D
C
Hood Assembly
Step 1. Connect the two zipper sections together.
Step 2. Pull zip to x hood onto seat unit.
Step 3. Insert hood frame into the opening of the hood and pull
through 5, ensuring the small bend on the frame near the attachment
point 6is angled away from the seat unit. Then attach the frame at
point Eto slot D, 7. 8. The hood is now securely assembled.
6
3
5
6
E D 7 8
7 | Assembly
Hood Disassembly
Step 1. Push on the plastic at point Ain the direction of the arrow to
unclip and detacth from slot B, 1 2.
Step 2. Pull on the hood connector 2and it will easily slide free.
Step 3. Unlatch the elastic band from the connector C, and detatch
the metal bar D; the canopy can now be completely removed 3.
1 2 3
A
C
B
D
Slot the seat’s connector to the attachment point on the frame until
you hear a “click” for both sides. The seat is now xed in the stroller
1,2.
Pull up on each side of the seat unit to ensure it is firmly fixed.
Press the buttons on both sides of the hand rail and pull to release 1,2.
Seat Attachment
Handrail
1
1
2
2
A
B1 2
2
C
D3
1 2
1 2
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
