POWER/CAN
LVDS
IN/OUT
KEYPAD AV IN AV IN/OUT SW GPS WIFI / BT
DEBUG
DIP SW HDMI IN R-KEY HDMI OUT USB 3.0 USB 2.0 MicroSD
ANDROID
INTERFACE
Does Not Use
12V ACC
Power Out
Reverse IN
Rear 12V
OMNI KEY
Full Installation Diagram <NTG5.5>
AV IN Port
DTV and DVD Front Camera Rear Camera
REAR IN
FRONT IN
DVB-T IR
DVD IR
IR IN
Does Not Use
UART
DVB-T , DVD
Mercedes NTG5.5
Head Unit
DOWN UP SEL MANU
If there is Optical harness
It should be moved to
provided main connector
!Important
OEM
Main Harness
LVDS Cable
OEM LVDS Cable
GPS FAKRA
12V ACC Power Out
For external device (Front Cam, DVD,DTV,Etc..) Power
REAR 12V
For the external rear view camera power
When the shift gear to reverse. the power will be "ON"
REVERSE IN
When the reverse gear is not detected by CAN-BUS,
the 'REVERSE 12V IN wire’
should be spliced with 12V power of reverse light.
(Red) B+ Pin # 15 =
(Brwon) Ground Pin # 12 =
(Purple) Pas Can Low Pin # 31 =
(Black) CMD CAN OUT L Pin # 22 =
(Purple/Whaite) Pas Can High Pin # 37 =
(Black/Whaite) CMD CAN OUT H Pin # 28 =
NTG5.5 Main Connector
3417
15
12
23 4037
31
28
22
B+
GND
Pas Can High H
Pas Can High L
CMD CAN IN H
CMD CAN IN L
PAD CAN OUT L
PAD CAN OUT H
PAD CAN IN L
PAD CAN IN H
Does Not Use
DVBT IN VIDEO
DVD IN VIDEO
