Immergas 3.027290 Manual de usuario

Cod. 1.042129 - Rev. ST.003678/001

Fig. 1

BRACKET KIT FORWALL MOUNTING

INERTIAL STORAGE TANK 75 LITRES

CODE 3.027290

GENERAL WARNINGS.

All products are protected with suitable transport packaging. The material must be stored in dry environments and protected against

weathering.

This instruction manual provides technical information for installing the kit. As for the other issues related to kit installation (e.g. safety in

the work site, environment protection, injury prevention), it is necessary to comply with the provisions specified in the regulations in

force and principles of good practice.

Improper installation or assembly of the appliance and/or compo-nents, accessories, kit and devices can cause unexpected problems to

people, animals and objects. Read the instructions provided with the product carefully to ensure a proper installation. Installation and

maintenance must be performed in compliance with the regulations in force, according to the manufacturer's instructions and byauthorised

professionally qualified staff, intending staff with specific technical skills in the plant sector, as envisioned by the Law.

WARNINGS:

Before making the holes to mount the bracket to the wall with the dowels supplied, we recommend referring to the main boiler

dimensions (Fig. 1) and to the related fixing seats of the frame.

MAIN DIMENSIONS

INSTALLATION (FIG. 2 - 3 - 4): To install proceed as follows:

- Fasten the mount (3) at the height desired on the wall inserting the screws in the specific holes prepared for the screws (2) and the

dowels (1) inside the kit (Fig. 2).

- Fasten the lower support (6) in the position shown in the dra-wing (Fig. 3). Insert the screws (2) and the dowels (1), present inside

the kit, into the specific holes. Insert the 2 screws (5) present inside the kit on the lower support.

- Fasten the frame (4) on the prepared seat on the boiler using the screws (5) inside the kit (Fig. 2).

- Hang the boiler to the bracket on the wall.

- Make sure that the boiler pedestal comes into contact with the lower support as shown in the drawing (Fig. 4).

KIT COMPOSITION.

Ref. Description Qty

1 Nylon dowel 12x60 7

2 Screw 8x80 for dowel 7

3 Wall-mounted boiler support 1

Frame for wall mounting boiler

5 Screws M6x15 6

6 Lower wall-mounted boiler support 1

Fig. 2

ASSEMBLY

Fig. 3

Fig. 4

FASTENING THE LOWER SUPPORT

LOWER SUPPORT POSITION ON PEDESTAL

Storage Tank 75 Litres

Reference Axis

Tabla de contenidos

Otros manuales de Almacenamiento de Immergas

Immergas

Immergas UB INOX 80 ErP Manual de usuario

Immergas

Immergas 3.022167 Manual del producto

Immergas

Immergas BASIC MAGIS PRO Manual del producto

Immergas

Immergas UB 1000 V2 Instrucciones de funcionamiento

Immergas

Immergas Hercules Condensing 26 2 E Manual de usuario

Immergas

Immergas COD. 3.030394 Manual del producto

Immergas

Immergas INOXSTOR 200 V2 Instrucciones de funcionamiento

Manuales populares de Almacenamiento de otras marcas

QNAP

QNAP TS 32PXU Series Manual de usuario

LaCie

LaCie RUGGED RAID Manual de usuario

Freecom

Freecom CLS DOCK Manual de usuario

PNY

PNY Attache P-FD64MBATT3 Manual de usuario

HP StorageWorks MSL2024 Manual de usuario

OLT

OLT 6x6 Maximizer Manual de usuario

Transcend

Transcend JetFlash 160 Manual de usuario

LaCie

LaCie RUGGED MINI Manual de usuario

Thunderbolt

Thunderbolt 600 Manual de usuario

Panasonic

Panasonic LB-DH8 series Manual

Intel

Intel RAID High Availability Manual de usuario

LaCie

LaCie 12big Thunderbolt 3 Manual de usuario

Spectra Logic

Spectra Logic T-Series Spectra T50e Manual de usuario

Panasonic

Panasonic LKM-F931-1 Manual de usuario

Tabernus

Tabernus Enterprise Erase E2400 Manual de usuario

Rocstor

Rocstor COMMANDER 3F series Manual de usuario

HP P9000 Manual de usuario

Western Digital

Western Digital Ultrastar Data60 Manual de usuario