LUXOR
4
LUXOR is the range of oor standing pellet boilers proposed by
Immergas for room central heating / C.H. systems and for the
production of DHW, with fan assisted open chamber with wide
ame/power modulation range, ideal for new, redevelopment
or in place of obsolete solid fuel generators.
e pellet is a particularly appreciated natural fuel that oers the
following important advantages: high caloric value and reduced
ash residue, savings in running costs, easy to use and nd.
anks to the reduced dimensions and high achievable power
(up to 33 kW), simplicity and ease of installation, the LUXOR
series boilers are the ideal solution for single family homes, but
also for small and medium-sized commercial buildings.
Particular attention to design was paid to search for maximum
energy eciency of the generator, as well as a high autonomy,
up to 56 hours with modulating operation (ref. LUXOR 28
and 33 models) and reduction of extraordinary maintenance
interventions.
All Immergas pellet boilers respect the maximum level of ef-
ciency of UNI EN 303-5 falling within class 5: the standard
classies the solid biomass boilers on the basis of eciency and
emissions of carbon monoxide (CO), gaseous organic carbon
compounds (OGC) and powder produced.
Class 5 is the only one that can benet from the Conto Termico
2.0; alternatively, the LUXOR series boilers can also benet from
the tax deductions in force.
Combined with a puer and possibly with a thermal solar sys-
tem, high levels of eciency can be achieved both from an eco-
logical and performance point of view. e thermal system can
also be integrated with a condensing boiler, providing additional
energy to the puer if renewable energy sources are insucient,
always ensuring maximum comfort at the lowest running costs.
Approved only for indoor installation in suitable technical vol-
umes or in a boiler room, they have an IPX 4D electrical protec-
tion; they are extremely simple to operate combined with very
minimal routine maintenance operations by the end customer.
e microprocessor electronics, allow an excellent control of
temperatures and, thanks to the LCD display always on view, an
excellent visibility of parameters and settings made.
For modern design, a number of dedicated options are available
for completing the system, such as:
• Anti-condensation kit, including mixing valve calibrated at
55 °C;
• Draught regulator kit, recommended on chimneys with long
sections (over 10 metres);
• Separated pellet tank kit with loading auger;
• Pellet loading control unit kit;
• Level sensor kit for pellet loading.
1 LUXOR DESCRIPTION
