IMER U.S.A. Inc.
-8-
WORKMAN350IIMULTIMIXER
MAINTENANCE
Lubrication
1.Alltheother componentsonthemixerwhichengageor movebackandforthshouldbe lubricatedwitha
lightaerosol type lubricanton aweeklybasis.WD- 40 works well forthisapplication.
2.Essentiallythegearboxissealedforlife.Thequality ofthegearsandthelubricantaresuchthatchanging
the oil is notnecessary.If you wanttochange the oil,see your dealeror call IMER U.S.Adirectlyfor
instruction.
3.Oneayearremovethecastcapfromthetop halfofthedump gearassemblyand greaseitup good.
(Part#36,page 12)
BeltTension
1.The mixerhastwobelts: one in the canopyand the otherin the arm.The beltsareproperlyadjusted
beforeleaving ourfactory,however,itisagoodidea tochecktheirtensionbeforeoperating themixer.
Then,when one beltbecomesloose,tighten itback tothisoriginal condition.
NOTE
Thebeltswillstretchthemostduring thefirstfew
hours ofoperation....check them frequently,and
always kill themotorand disconnectthespark plug
wire beforetouching thebelts. Or,ifyourmachinehas
an electric motor,unplug itfromthepowersource
beforeadjustingthe behs.
2.Totightenthebeltinside the canopyloosen the boltswhichanchor themotor mountplateto
themixerframe.Thisallowsthe motormountplatetoslide down theframe,whichin turn
tightensthe belt.Thebeltshould have1/4"to3/8"of play.Now re-tighten the boltswhich
anchor themotor mountplate.
3.Totightenthe beltinside the armloosen the4nutswhichanchor thegearboxonthe arm.
Tighten the beltbyturningthe adjustment bolt. The beltshould have1/4"to3/8"ofplay,do
notovertighten asthisshortenstheir drivelife.Now re-tighten the gearboxanchorbolts.
