Imagine Videotek VTM-2400 Manual de usuario

Delivering the Moment

Videotek™ VTM-2400

Multi-Format HD and SD-SDI Monitor

Edition C

Item # 061782

Installation and Operation

Manual

Publication Information

Imagine Communications considers this document and its contents to be proprietary and confidential.

Except for making a reasonable number of copies for your own internal use, you may not reproduce

this publication, or any part thereof, in any form, by any method, for any purpose, or in any language

other than English without the written consent of Imagine Communications. All others uses are illegal.

This publication is designed to assist in the use of the product as it exists on the date of publication of

this manual, and may not reflect the product at the current time or an unknown time in the future. This

publication does not in any way warrant description accuracy or guarantee the use for the product to

which it refers. Imagine Communications reserves the right, without notice to make such changes in

equipment, design, specifications, components, or documentation as progress may warrant to improve

the performance of the product.

Trademarks

Videotek® VTM is a trademark of Imagine Communications or its subsidiaries.

Microsoft® and Windows® are registered trademarks of Microsoft Corporation. All other trademarks

and trade names are the property of their respective companies.

Contact Information

Imagine Communications has office locations around the world. For locations and contact information

see: http://www.imaginecommunications.com/contact-us/

Support Contact Information

For support contact information see:

Support Contacts: http://www.imaginecommunications.com/services/technical-support/

eCustomer Portal: http://support.imaginecommunications.com

VTM-2400 Installation and Operation Handbook iii

Operator’s Safety Summary

WARNING: These instructions are for use by qualified personnel only. To reduce

the risk of electric shock, do not perform this installation or any servicing unless you

are qualified to do so. Refer all servicing to qualified service personnel.

Ensuring Safety

The unit should not be exposed to dripping or splashing, and no objects filled with liquids,

such as vases, shall be placed on the unit.

When the unit is to be permanently cabled, connect the protective ground conductor

before making any other connections.

Operate built-in units only when they are properly fitted into the system.

For permanently cabled units without built-in fuses, automatic switches, or similar

protective facilities, the AC supply line must be fitted with fuses rated to the units.

Before switching on the unit, ensure that the operating voltage set at the unit matches

the line voltage, if appropriate. If a different operating voltage is to be set, use a fuse with

the appropriate rating. Refer to the Installation Instructions.

Units of Protection Class I with an AC supply cable and plug that can be disconnected

must be operated only from a power socket with protective ground contact:

−Do not use an extension cable—it can render the protective ground connection

ineffective.

−Do not intentionally interrupt the protective ground conductor.

−Do not break the protective ground conductor inside or outside the unit or loosen the

protective ground connection; such actions can cause the unit to become electrically

hazardous.

Before opening the unit, isolate it from the AC supply, and then ensure that

−Adjustments, part replacements, maintenance, and repairs are carried out by

qualified personnel only.

−Safety regulations and rules are observed to prevent accidents.

−Only original parts are used to replace parts relevant to safety (for example, the

power on/off switches, power transformers, and fuses).

Replaceable fuses can be hazardous when live. Before replacing a fuse, disconnect the AC

power source.

Operator’s Safety Summary

iv VTM-2400 Installation and Operation Handbook

Use caution when cleaning the equipment; isopropyl alcohol or similar solvents can

damage or remove the labels.

Observe any additional safety instructions specified in this manual.

Important Safety Instructions

Read these instructions.

Keep these instructions.

Heed all warnings.

Follow all instructions.

Do not use this apparatus near water.

Clean only with dry cloth.

Do not block any ventilation openings. Install in accordance with the manufacturer’s

instructions.

Do not install near any heat sources such as radiators, heat registers, stoves, or other

apparatus (including amplifiers) that produce heat.

Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized

plug has two blades with one wider than the other. A grounding type plug has two

blades and a third grounding prong. The wide blade or the third prong is provided for

your safety. If the provided plug does not fit into your outlet, consult an electrician for

replacement of the obsolete outlet.

Protect the power cord from being walked on or pinched particularly at plugs,

convenience receptacles, and the point where they exit from the apparatus.

Only use attachments/accessories specified by the manufacturer.

Unplug this apparatus during lightning storms or when unused for long periods of

time.

Refer all servicing to qualified service personnel. Servicing is required when the

apparatus has been damaged in any way, such as power-supply cord or plug is

damaged, liquid has been spilled or objects have fallen into the apparatus, the

apparatus has been exposed to rain or moisture, does not operate normally, or has

been dropped.

The device’s IEC power connector shall remain readily accessible.

WARNING: To reduce the risk of fire or electric shock, do not expose this

apparatus to rain or moisture.

Operator’s Safety Summary

VTM-2400 Installation and Operation Handbook v

Explanation of Symbols

These symbols may appear on Imagine Communications equipment:

Certification Labels and Symbol Locations

On Imagine Communications equipment, certification labels and symbols are located on the

back panel, rear chassis sides, or bottom rear of the chassis. On smaller space-restricted units,

most labels and symbols can be found on the bottom rear of the chassis.

Directives and Compliances

vi VTM-2400 Installation and Operation Handbook

Directives and Compliances

This section provides information concerning Imagine Communications compliance with EU

Directive 2002/95/EC and EU Directive 2002/96/EC.

Restriction on Hazardous Substances (RoHS) Directive 2002/95/EC

Hazardous Substances (RoHS)—sets limits on the use of certain substances found in electrical

and electronic equipment. The intent of this legislation is to reduce the amount of hazardous

chemicals that may leach out of landfill sites or otherwise contaminate the environment

during end-of-life recycling. The Directive, which took effect on July 1, 2006, refers to the

following hazardous substances:

Lead (Pb)

Mercury (Hg)

Cadmium (Cd)

Hexavalent Chromium (Cr-V1)

Polybrominated Biphenyls (PBB)

Polybrominated Diphenyl Ethers (PBDE)

In accordance with this EU Directive, all Imagine Communications products sold in the

European Union will be fully RoHS-compliant and “lead-free.” (See the Imagine

Communications Premier website for more information on dates and deadlines for

compliance.) Spare parts supplied for the repair and upgrade of equipment sold before July 1,

2006 are exempt from the legislation. Imagine Communications equipment that complies

with the EU directive will be marked with a RoHS-compliant symbol, as shown in Figure 1.

Figure 1. RoHS Compliance Symbol

Waste from Electrical and Electronic Equipment (WEEE) Directive

2002/96/EC

The European Union (EU) Directive 2002/96/EC on Waste from Electrical and Electronic

Equipment (WEEE) deals with the collection, treatment, recovery, and recycling of electrical

and electronic waste products. The objective of the WEEE Directive is to assign the

responsibility for the disposal of associated hazardous waste to either the producers or users

of these products. As of August 13, 2005, producers or users are required to recycle electrical

and electronic equipment at end of its useful life, and must not dispose of the equipment in

VTM-2400 Installation and Operation Handbook vii

landfills or by using other unapproved methods. (Some EU member states may have different

deadlines.)

In accordance with this EU Directive, Imagine Communications and other companies selling

electric or electronic devices in the EU will affix labels indicating that such products must be

properly recycled.

(See the Imagine Communications Premier website for more information on dates and

deadlines for compliance.) Contact your local Imagine Communications sales representative

for information on returning these products for recycling. Imagine Communications

equipment that complies with the EU directive will be marked with a WEEE-compliant symbol,

as shown in Figure 2.

Figure 2. WEEE Compliance Symbol

VTM-2400 Installation and Operation Handbook viii

Contents

Operator’s Safety Summary ....................................................................................iii

Ensuring Safety ...........................................................................................................................iii

Important Safety Instructions.......................................................................................................iv

Explanation of Symbols................................................................................................................v

Certification Labels and Symbol Locations ..................................................................................v

Directives and Compliances....................................................................................vi

Restriction on Hazardous Substances (RoHS) Directive 2002/95/EC........................................vi

Waste from Electrical and Electronic Equipment (WEEE) Directive 2002/96/EC.......................vi

Section 1 ♦Introduction...........................................................................................1

Video Standards Supported .........................................................................................................2

Service and Support.....................................................................................................................4

Section 2 ♦Installation.............................................................................................5

Inspecting the Shipment...............................................................................................................5

Rack Mounting the VTM-2400......................................................................................................6

Connecting the VTM-2400...................................................................................................7

Ethernet Setup.....................................................................................................................7

Configuring the VTM/TVM Series with the RCU-2400 Remote Control............................11

Section 3 ♦General Operation...............................................................................12

Terms..........................................................................................................................................12

Introduction to Operating the VTM-2400....................................................................................12

Types of Controls........................................................................................................................15

Selecting a Pane.........................................................................................................................16

Full-Screen Display Selection............................................................................................16

Selecting a Video Input...............................................................................................................16

Contents

VTM-2400 Installation and Operation Handbook ix

Powering Down from the Front Panel........................................................................................ 16

Navigating the Pane Setup Menu.............................................................................................. 16

Reference.......................................................................................................................... 17

Pane Overview .......................................................................................................................... 17

Main Title Bar.................................................................................................................... 18

Icons ............................................................................................................................. 19

Status Bar ......................................................................................................................... 19

The Waveform Display .............................................................................................................. 19

Waveform Front Panel Selections .................................................................................... 23

Moving the Waveform using the Setup Knobs ............................................................. 23

Sweep Button ............................................................................................................... 23

MAG Button .................................................................................................................. 24

Gain Button................................................................................................................... 24

Zoom Button ................................................................................................................. 25

Placing the Waveform Display in Line Select Mode..................................................... 25

Waveform Pane Menu Selections..................................................................................... 26

Filter Selection.............................................................................................................. 28

Parade and Overlay Selections.................................................................................... 28

Format .......................................................................................................................... 28

Blanking........................................................................................................................ 28

Component Sequence.................................................................................................. 29

Center Waveform.......................................................................................................... 29

Waveform Setup........................................................................................................... 29

Utilizing the Vector Display........................................................................................................ 29

Gain Button....................................................................................................................... 31

Zoom Button ................................................................................................................. 32

Placing the Vector Display in Line Select Mode.......................................................... 33

Vector Pane Menu Selections........................................................................................... 33

Contents

x VTM-2400 Installation and Operation Handbook

Standard........................................................................................................................34

Vector Position...............................................................................................................34

Center Vector.................................................................................................................34

Vector Setup..................................................................................................................34

Picture Display............................................................................................................................34

Alarm Status Display ..................................................................................................................35

Audio Display..............................................................................................................................37

Audio Scales......................................................................................................................37

Vertical Audio Displays..................................................................................................38

Expanding the Audio Display.............................................................................................41

Presets........................................................................................................................................41

Storing Presets ..................................................................................................................41

Recalling Presets...............................................................................................................42

Preset 4 (Factory Preset)...................................................................................................42

Section 4 ♦Global Setup Menu Functions............................................................ 43

Navigating the Setup Menu........................................................................................................43

Setup Menu and Alarm Tables...................................................................................................43

Video Format Menu ...........................................................................................................56

Video A and B Configure...............................................................................................56

Waveform Setup Menu......................................................................................................56

Digital Waveform Graticule............................................................................................56

Waveform Intensity........................................................................................................56

Waveform Contrast........................................................................................................56

Persistence....................................................................................................................56

Attack.............................................................................................................................56

Vector Setup Menu ............................................................................................................57

SD I/Q Lines ..................................................................................................................57

Vector Intensity..............................................................................................................57

Vector Contrast..............................................................................................................57

Tabla de contenidos

Otros manuales de Monitor de Imagine

Imagine

Imagine Platinum Predator II-GX 2RU Manual de usuario

Imagine

Imagine VTM-2000 Manual del propietario

Imagine

Imagine VTM-2000 Manual de usuario

Imagine

Imagine Selenio 6800+ Manual de usuario

Manuales populares de Monitor de otras marcas

Linear Acoustic

Linear Acoustic LQ-1000 Manual de usuario

AOC

AOC I2579V Manual de usuario

Gateway

Gateway FPD1520 Manual de usuario

Furuno

Furuno Mu 120c Manual de usuario

Asus

Asus VB171D - 17" LCD Monitor Manual de usuario

Dell

Dell S2230MX Instrucciones de uso

Philips

Philips 107C64 Manual de usuario

Dell

Dell S2409WFP Manual de usuario

EverFocus

EverFocus EN-7517E Manual de usuario

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manual de usuario

Dell

Dell Precision 7680 Manual de instrucciones

LG 50PM1M - - 50" Plasma Panel Manual de usuario

Bosch

Bosch DDU 9 Manual de usuario

Acer

Acer A231HL Manual de usuario

Philips

Philips 86BDL4152T Manual de usuario

NEC

NEC AccuSync LCD5V Manual de usuario

Emay

Emay SleepO2 Manual de usuario

IBM

IBM 6360 Instrucciones de instalación