Imagine communications D Series Manual de servicio

Reference

D-Series Harris J/S (JSC-2)

Jog-Shuttle Panel

Reference

11-April-2011

D-Series Harris J/S (JSC-2) Jog-Shuttle Panel

Reference

Publication Information

Imagine Communications considers this document and its contents to be proprietary and

confidential. Except for making a reasonable number of copies for your own internal use, you

may not reproduce this publication, or any part thereof, in any form, by any method, for any

purpose, or in any language other than English without the written consent of Imagine

Communications. All others uses are illegal.

This publication is designed to assist in the use of the product as it exists on the date of

publication of this manual, and may not reflect the product at the current time or an unknown time

in the future. This publication does not in any way warrant description accuracy or guarantee the

use for the product to which it refers. Imagine Communications reserves the right, without notice

to make such changes in equipment, design, specifications, components, or documentation as

progress may warrant to improve the performance of the product.

Trademarks

Product names and other brands (such as ADC™, D-Series™, Nexio®, Nexio® Insight, Nexio®

Motion, PowerSmart®, Versio™) are trademarks or trade names of Imagine Communications or

its subsidiaries. Microsoft® and Windows® are registered trademarks of Microsoft Corporation.

All other trademarks and trade names are the property of their respective companies.

Contact Information

Imagine Communications has office locations around the world. For domestic and international

location and contact information see: http://www.imaginecommunications.com/contact-us/

Support Contact Information

For domestic and international support contact information see:

Support Contacts: http://www.imaginecommunications.com/services/technical-support/

eCustomer Portal: http://support.imaginecommunications.com

D-Series Harris J/S (JSC-2) Jog-Shuttle Panel

Reference Contents

Contents

About this Manual .............................................................................5

Audience ..................................................................................................................................... 5

Measurement Standards............................................................................................................. 5

Product Unpacking Notes ........................................................................................................... 5

WEEE and RoHS Compliance.................................................................................................... 5

Harris J/S (JSC-2) Ingest Control Panel............................................7

About the Harris J/S Control Panel............................................................................................. 7

Panel Features........................................................................................................................ 7

Specifications .............................................................................................................................. 8

Operation.......................................................................................... 9

Panel Layout ............................................................................................................................... 9

Timecode Display...................................................................................................................... 10

Jog/Shuttle Wheel..................................................................................................................... 10

Direction Indicator................................................................................................................. 10

Button Mapping......................................................................................................................... 11

DALstation Functionality....................................................................................................... 11

DALingest Functionality........................................................................................................ 14

Troubleshooting......................................................................................................................... 17

Loss of JSC-2 Comms.......................................................................................................... 17

Configuration................................................................................... 18

DALstation Configuration .......................................................................................................... 18

DALingest Configuration ........................................................................................................... 18

Cabling Pinouts ......................................................................................................................... 18

Unit Replacement............................................................................ 20

Notice to the Original Purchaser.................................................Error! Bookmark not defined.

To Return a Unit..........................................................................Error! Bookmark not defined.

To Order a New or Replacement Unit....................................................................................... 20

Dseries Harris J/S (JSC-2) Jog-Shuttle Control Panel

Reference About this Manual

About this Manual

Audience

This manual is intended as a general reference and for use by engineers or

technicians when installing professional automation computers.

Measurement Standards

The following measurement standards are used in this manual:

Rack Unit (RU) is an Imperial standard measurement for device height. (While

also seen as U.) [1RU = 44.45mm = 1.75 inches]

19” Rack Standard is an international standard for racking width. [19” Rackmount

standard = 482.6mm]

Other measures for in-document conversion: (1m = 3.281ft), (0.3048m = 1ft),

(25.4mm = 1in), (1kg = 2.205lb)

Website for length & weight conversions: http://www.convert-me.com/en/convert

Product Unpacking Notes

Thoroughly inspect all articles immediately upon receipt. Any damage discovered

should be cause for a damage claim against the carrier.

WEEE and RoHS Compliance

Panels addressed in this document are WEEE and RoHS Compliant. This includes

compliance with Electrical and Electronic Equipment (WEEE) and Restriction on

Hazardous Substances (RoHS) (Combined WEEE/RoHS) requirements now

mandated in Europe, and being adopted in other parts of the world.

Restriction of Hazardous Substances Directive (RoHS) 2002/95/EC

mandates: Recycling of devices at end of life and the elimination or reduction

of a list of hazardous substances. This includes six key hazardous materials

typically used in the manufacture of various types of electronic and electrical

equipment: Lead, Mercury, Cadmium, Hexavalent chromium (chromium VI or

Cr6+), Polybrominated biphenyls (PBB), and Polybrominated diphenyl ether

(PBDE)

Dseries Harris J/S (JSC-2) Jog-Shuttle Control Panel

Reference About this Manual

Waste Electrical and Electronic Equipment Directive (WEEE Directive)

2002/96/EC sets collection, recycling and recovery targets for all types of

electrical goods. The directive imposes the responsibility for the disposal of

waste electrical and electronic equipment (WEEE) on the manufacturers of

such equipment. The companies are compelled to use the collected waste in

an ecological-friendly manner, either by ecological disposal or by

reuse/refurbishment of the collected WEEE. Under WEEE "Users of electrical

and electronic equipment from private households should have the possibility

of returning WEEE at least free of charge"

Dseries Harris J/S (JSC-2) Jog-Shuttle Control Panel

Reference J/S (JSC-2) Ingest Control Panel

J/S (JSC-2) Ingest Control Panel

About the J/S Control Panel

The Harris J/S Control panel (JSC-2 panel) provides basic transport and jog/shuttle

controls in a compact desktop unit. This panel gives operators a choice in controlling

ingest environments by providing desktop device transport button control in addition

to an automation’s Device Control Interface and a broadcast device’s conventional

transport controls.

When used in conjunction with an automation playout or ingest workstation, the

workstation displays the events to be controlled and the JSC-2 provides a “hands-on”

user interface.

IMPORTANT: The JSC-2 panel is supported by DALstation v3.59.00 or higher, and

DALingest v3.30.00 or higher.

Panel Features

JSC-2 Panel features include:

Sony Jog – Shuttle knob

Dseries Harris J/S (JSC-2) Jog-Shuttle Control Panel

Reference J/S (JSC-2) Ingest Control Panel

The jog/shuttle mechanism is a weighted jog wheel and a concentric shuttle ring.

20 control buttons

5 dedicated transport controls

A back-lit LCD time code display for easy and accurate editing.

V2.14 Firmware

The JSC-2 Ingest Panel uses firmware v2.14 to support jog/shuttle status query

commands.

Note: Firmware versions prior to v2.14 do not support jog/shuttle querying and the

LCD display will appear to become unresponsive if left idle or in the ‘shuttle’ position

for a period of time. Moving the shuttle wheel or pressing any button on the control

panel will reupdate the display.

Specifications

The following table provides a brief list of specifications for a JSC-2 Panel.

Specification Description

Size 10.5” x 6.5” x 3.5” (26.7 x 16.5 x 8.9)

Weight 4 lbs (1.8 KG)

Power Requirements The JSC-2 comes with an external power supply ‘brick’:

(universal, 12 volt DC switching power supply). If you

need a power cord specific to your location, please

contact your local distributor.

Warning: Using a power supply other than the unit

specified can result in damage to the panel and/or other

equipment which is not covered by the manufactures

Warranty.

Power Consumption Vendor-specified power input and output information is

printed on the power supply label:

Power Input = 100-240V AC at 0.45A peak

Power Output = 12V DC at 1.25A max.

Inputs/Outputs RS-422 (x1)

Typical Location In close proximity to the operator workstation.

Mounting

Requirements No mounting is required. Since this is a desktop unit,

only sufficient desk space is required.

Dseries Harris J/S (JSC-2) Jog-Shuttle Control Panel

Reference Operation

Operation

Panel Layout

The JSC-2 has as many buttons as the older DAL Jog/Shuttle Panel allowing the

same assignments on both, with 2 buttons not assigned on both. Button mapping for

the JSC-2 panel is shown by the following diagram.

About Lamp States

Buttons with a Lamp state

Buttons dependent on showing a lamp state for proper User Interface operation are

located on the second row of buttons.

Operation Keys: These buttons have Lamp States. They are: HOLD, TAKE,

END, ACCEPT, DELETE, and OK.

Dseries Harris J/S (JSC-2) Jog-Shuttle Control Panel

Reference Operation

Buttons without a Lamp State

The following buttons do not have Lamp States:

Machine Control buttons: Do not have Lamp States, so do not show transport

status.

Source and Dest buttons: Do not have Lamp States. Their states are indicated in

the LCD display.

The left and rightmost character of the LCD display show an ‘*’ character to

indicate the current mode selection.

The ‘*’ character is displayed in the LCD position nearest to the button

associated with the current selection (leftmost for Source selected, rightmost

for Destination).

Timecode Display

The 16 character LCD screen (located between the Source and Dest buttons) will

display timecode and transport status for the currently selected device. The first five

(5) characters of this displays the following symbols for transport status:

[] - Stop

|| - Pause

> - Play

>> - Forward

<< - Reverse

Note: Firmware version v2.14 or higher is required to use the Timecode display.

Firmware versions prior to v2.14 do not support jog/shuttle querying and the LCD

display will appear to become unresponsive if left idle or in the ‘shuttle’ position for a

period of time. Moving the shuttle wheel or pressing any button on the control panel

will re-update the display.

Jog/Shuttle Wheel

The wheel mechanism behaves in a similar manner to the Sony wheel found on the

DAL panels, except that while in shuttle mode, the wheel is spring-loaded.

Depression of the wheel sets the panel in ‘jog’ mode.

Releasing the wheel changes the mode to shuttling.

Direction Indicator

The red arrow indicator lamps situated above the jog/shuttle wheel identifies the

direction the wheel is turned.

Jog messages can be received at a rate of approximately fifty messages per

second.

The range of shuttle positioning is approximately +/- 15.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Hardware de red de Imagine communications

Imagine communications

Imagine communications Infocaster Manager NM3200 Manual de usuario

Manuales populares de Hardware de red de otras marcas

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manual de usuario

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manual de usuario

Yudor

Yudor YDS-16 Manual de usuario

D-Link

D-Link ShareCenter DNS-320L Manual de usuario

Samsung

Samsung ES1642dc Instrucciones de uso

Honeywell Home

Honeywell Home LTEM-PV Instrucciones de montaje

evertz

evertz 7700 Series Manual de usuario

D-Link

D-Link ShareCenter DNS-343 Manual de usuario

Asante

Asante AsanteBridge 1012 Manual de usuario

FireBrick

FireBrick FB2700 Manual de usuario

Audiovox Electronics

Audiovox Electronics ARWH2T Manual de usuario

ADC

ADC DSX-1 Manual

NetComm

NetComm NF2 Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 5620 Manual de usuario

Dell EMC

Dell EMC XC6420 Series Manual de usuario

Lanner

Lanner NCA-1020A Manual de usuario

Allied Telesis

Allied Telesis AT-TN121-A Manual de usuario

Arista

Arista CCA-ETM-Q12 Manual de usuario