6
Apply correct voltage.
The input AC power of the charger is AC 100-240V and 50-60Hz.
Check the AC power before use. Providing AC power of an inappropriate range can
cause flame, fire, damage on the equipment, or severe injuries, electric shock or
even death. Inappropriate AC output voltage or frequency from AC power is a
common issue. Before connecting AC power cord, measure AC output voltage
using the circuit tester. Inappropriately high voltage or frequency of AC power can
cause flame, fire, damage on the equipment or severe injuries or even death.
Do not excessively pull on, heat or modify the AC power cable. The use of damaged
power cable may cause fire or injury.
Always connect to 3-core AC power cord. Do not use 2-core AC power cord, cable
and plug.
Do not touch AC plug, AC power cord or Multipack-F with a wet hand. It could result
in electric shock.
Do not disassemble AC adapter, battery or the Multipack-F. Transforming or modification
of Multipack-F unit could cause fire, electric shock or injury.
When using an external battery, follow the instructions below;
�
The use of 3rd party or makeshift external battery may cause fumes or damage
to the equipment and, in serious cases, it could result in burn, injury or even
death.
�
Do not discard the battery into a trash incinerator or fire.
�
Do not charge or discharge the battery near a flame or blaze.
�
Do not excessively shake or physically contact the battery.
�
If a battery is not fully charged or green LED is not turned on in six hours,
immediately stop charging and contact I.
Do not place any object on the AC adaptor during charging.
Use charger (MPF-B) exclusively designed for the equipment. The use of other
battery pack may cause fumes, burn, damaged to the unit, injury or even death.
