ILD 15 ECO Manual de usuario

ENGLISH

ILD 15 ECO

EN 13240 - NS 3058

Manual

Model ILD 15 ECO

VERSION NO. 2, 12.08.2021

ENGLISH

Content

Dane techniczne................................................................................................................... 4

Przed instalacją .................................................................................................................... 5

Opakowanie.......................................................................................................................... 5

Pierwsze użycie.................................................................................................................... 5

Montaż.................................................................................................................................. 5

Górne/tylne podłączenie do przewodu dymowego............................................................... 6

Akcesoria.............................................................................................................................. 9

Płyta podłogowa ................................................................................................................... 9

Części eksploatacyjne........................................................................................................ 10

Zamknięty system spalania ................................................................................................ 11

Komin i króciec dymowy..................................................................................................... 11

Dokładanie paliwa i przeładowanie pieca........................................................................... 12

Paliwo................................................................................................................................. 12

Dokładanie paliwa do wygasającego pieca........................................................................ 13

Użycie w sposób przyjazny dla środowiska........................................................................ 13

Używanie pieca w różnych warunkach pogodowych.......................................................... 13

Regulator powietrza do rozpalania..................................................................................... 14

Regulator powietrza do palenia.......................................................................................... 14

Popielnik i ruszt ................................................................................................................. 15

Usuwanie resztek popiołu................................................................................................... 16

Otwarte regulatory dopływu powietrza ............................................................................... 16

Zasady ogólne.................................................................................................................... 16

Rozpalanie pieca metodą „od góry”.................................................................................... 17

Czyszczenie i konserwacja................................................................................................. 18

Wymiary.............................................................................................................................. 19

Odległość od materiałów palnych, z izolowaną rurą dymową ............................................ 20

Odległość od ściany ogniowej, z izolowaną rurą dymową.................................................. 20

Bezpieczna odległość......................................................................................................... 20

Rozwiązywanie problemów ................................................................................................ 21

ENGLISH

Test in compliance with EN 13240

Model 15 ECO

CO Emission at 13% O

0,0964 %

Emission at 13% O

1205 mg/Nm

Dust @ 13% O

19 mg/Nm

@ 13% O

96 mg/Nm

Eciency 77 %

Energy eciency index 102,65

Energy eency classs A

Nominel output 5,5 kW

Chimney temperature EN 13240 281 °C

Amount of smoke 6,0 g/sec

Sub-pressure EN 13240 12 Pa

Recommended sub-pressure in connecting piece 18 Pa

Required combustion air supply 17,6 m

Fuel Wood

Fuel consumption 1,90 kg/h

Amount of fuel 1,40 kg

Amount of fuel, max 2,10 kg

Refuelling frequency for nominal output 45 min

Weight 109 kg

Internal ﬂue connection piece, internal diameter 135 mm

External ﬂue connection piece, external diameter 148 mm

Max. fuelsize diameter 10 cm

Max. fuel length 30 cm

Ild is a range of safe, environmentally friendly and ecient high-quality stoves, which meet all

requirements for a modern heating source. In order to get the best out of your stove, we

recommend that you read this booklet carefully.

Technical Data Sheet

ENGLISH

Before the Installation

Ensure that your Local registered installer can recommend wood stove installation.

Ensure that updated European, national and local standards can be fulﬁlled.

Ensure that the area can support the stove and installation weight.

Ensure that there will be sucient space and access to service.

Ensure that the heat output of the stove is suitable for the room.

Warning! Do not make any unauthorized changing on the stove.

Packing

The stove comes on a wooden pallet with a wood frame nailed down on vertical boards at the

corners.

Consult local regulations on the disposal of these materials; the wood has been treated to repel

vermin and may not be burnt in the stove.

First Time Use

Before the stove is heated up for the ﬁrst time, we advise you to open all the doors and

windows in the room where the stove is installed, to ensure an optimal ventilation. When the

stove has reached operating temperature, the surface treatment will harden and emit a strong

odor for a short time.

Mounting

Before mounting, ensure that the base is even and secure. It has to be able to carry the weight

of the stove as well as the chimney and any other equipment.

There must be a ﬁre resistant ﬂoor or ﬂoor plate around the stove to protect the ﬂoor against

damages from sparks. National and local regulations must always be respected.

If it is necessary to connect an elbow pipe, a curved rather than a sharp elbow pipe is

recommended as this causes the least possible reduction in the chimney draught. See more

under general directions and chimney.

ENGLISH

Flue Connection Pipe / Rear Outlet

1. Pull the heat shield of the inner mantle up

and take it out.

2. Loosen the cover plate by turning it back

and forth until it loosens.

3. Drill a hole (Ø 8 mm) in all fasten points

of the cover plate for rear outlet in the

outer mantle.

4. Remove the cover plate.

ENGLISH

5. Lift out the bae plates by removing the

pins holding the plates. First remove the

lower plate, then the upper.

6. Remove the bolts from the cover plate.

7. Beat carefully with a hammer on the

inside until the plate loosens.

8. Then move the plate to the top outlet.

ENGLISH

9. Mount the bolts on the cover plate.

10. Finally you can mount the ﬂue connecting

piece in the rear outlet

Remember to remount the heat shield

in the inner mantle!

ENGLISH

Accessories

Shaped ﬂoor plate - glass: 642x471 mm: 50061419

Floor plate

If you are placing the stove on a ﬂammable ﬂoor, you must comply with the national and local

regulations on the size of any non-ﬂammable subsurface required to cover the ﬂoor around the

stove.

Your local dealer can advise you on regulations concerning protection of ﬂammable materials in

the vicinity of your stove.

The ﬂoor plate’s function is to protect the ﬂoor and ﬂammable material against any sparks that

may occur. A ﬂoor plate can be made of steel or glass, but the stove can also be erected on clinker

concrete, natural stone or similar materials.

The stove has adjustment screws under the stove. Use the adjustment screws to get the stove

to stand straight and level. If the ﬂoor plate is used, the stove must be adjusted so that the

plate can be placed under the front of the stove.

NOTICE: It is very important that the stove is level to allow an optimal function of the

door. Please note that once mounted the stove can no longer be adjusted!

ENGLISH

Bae plates

Wearing Parts

When replacing or cleaning the combustion chamber´s insulation (vermiculite), ﬁrst remove the

bae plate.

Gently lift the plate and remove the pins in the side plates holding the plate in place. Push the

front of the deﬂector plate upwards and turn it carefully making it possible to remove the plate

from the burn chamber.

Then remove the top deﬂector plate. The side plates and ﬁnally the back plate can now be

removed. Do this gently in order not to damage the plates.

Tabla de contenidos

Otros manuales de Cocina de ILD

ILD

ILD 12 ECO Manual de usuario

ILD

ILD 9 ECO Manual de usuario

ILD

ILD 6 Manual de usuario

Manuales populares de Cocina de otras marcas

Arada

Arada Cassette Stove Manual de usuario

Parmco

Parmco FS 600 Manual de usuario

MCZ

MCZ SUITE AIR 10 M2 Manual de usuario

HearthStone

HearthStone Stowe DV 8321 Guía de solución de problemas

Cattara

Cattara FAMILY Manual de usuario

Stanley

Stanley Argon F500 OVAL Manual de usuario

Avalon

Avalon B-VENT Manual de usuario

Nordpeis

Nordpeis Vega Manual de usuario

Exquisit

Exquisit EKC601-5 Manual de operación

Stanley

Stanley Oisin Oil MK II Manual del propietario

Thermocet

Thermocet Brookfield S/CC Manual de usuario

HASE

HASE delhi Manual de usuario

Vermont Castings

Vermont Castings Intrepid 2 Manual de usuario

Italiana Camini

Italiana Camini CLASSICA Guía de inicio rápido

Avalon

Avalon Vashon Avanti DVS FS Manual de usuario

Spartherm

Spartherm ambiente a1 Manual de usuario

Dimplex

Dimplex MCFSTV12AU Manual de usuario

Warmlite

Warmlite WL46040 Manual de usuario