Ikan Rayden RB5 Manual de usuario

CHECKED BY

Rayden

Quick Start Guide

Rayden LED Lights

What’s Included

RB5

RW5

RB10

RW10

1 x Light Fixture

1 x Yoke Mount

1 x Neutral Density Filter

1 x Power Supply with Cable

1 x Power Supply for Dual Charger

1 x DV Dual Battery Charger

www.ikancorp.com | 1.713.272.8822 | [email protected] because we’re ﬁlmmakers too

Getting to know your Rayden Lights

PRECAUTIONS

• Keep the ﬁxture away from water and all ﬂammable gases or liquids.

• Use ONLY the recommended batteries.

• Handle the unit with care.

• DO NOT attempt to disassemble or repair the unit without ﬁrst contacting the service department at www.ikancorp.com

• Keep the unit clean and free of dust. The unit can be cleaned with a soft, dry cloth.

• Use ONLY parts provided by the manufacturer.

• Always use caution when plugging in the ﬁxture.

Mounting the Rayden to a stand

The Rayden LED light comes with a pre-installed yoke and combo mount. This allows the ﬁxture to easily sit and adjust on any

stand. The angled yoke allows the light to move freely, without obstruction. The Baby 5/8” and Junior 1-1/8” Combo pin give the

user a wide range of stands. The light can be mounted either horizontally or vertically on a 5/8” baby pin.

Power the LEDs

The Mylo light comes with an included AC power supply and 6 foot cable. This allows the user to plug into any standard 120-240v

electrical outlet. The Mylo LED light can be powered from one of two Sony “L” Style DV batteries that are supplied with the unit.

Adjusting the Color & Brightness of the Light

The Mylo LED light is controlled by the large yellow knob on the rear of the ﬁxture. The knob was designed with the idea that it

could be reached and adjusted when the light is up on a stand. The knob has two push settings.

The default setting is the brightness from 10%-100% brightness.

By pressing in on the knob, the color temperature can be adjusted. (Bi-Color lights)

Changing the Pro Battery Plate

Adding or removing the pro battery plate on the back of your ﬁxture can be easily achieved.

NOTE: The ﬁxture comes pre-installed with the Gold-Mount battery plate.

The process starts with the removal of the four screws on the four corners of the plate.

Once the screws are removed, separate the plate from the back of the ﬁxture.

Unplug the 2-pin connector from the ﬁxture.

Store the screws and the Gold-Mount in a safe place.

Reattaching the V-Mount plate is a simple process.

www.ikancorp.com | 1.713.272.8822 | [email protected] because we’re ﬁlmmakers too

Remote Control

The light can be adjusted also using the RF remote control. The use of the remote allows for multiple lights to be connected, as well as

control of the brightness.

Remote Control Button Functions

• Press & Hold “A” for 5 seconds to sync remote control to light(s)

• Press “A” to power ON/OFF (for Daylight Light only)

• Press “A”& "B" to power ON/OFF (for Bi-Color Light only)

• Press “B” to adjust 4 levels of light intensity in increments of 25%

• Press and Hold “B” for 5 seconds to Enable/Disable sound

• Hold down “C” to increase light intensity 0%-100%

• Hold down “D” to decrease light intensity 100%-0%

Optional Accessories

Some other products that work well with the Rayden lights from Ikan include:

HD-STND

ROLLR-STND10

CP-STND-V3

SW-04

KCP-703

Heavy Duty Light Stand

2 Stage Roller Stand 10 ft 6 in

Compact Light Stand Version 3

Safety Wire

Stage Clamp w/ 16mm Stud

Plug the wired 2-pin connector into the ﬁxture where we just unplugged the Gold-Mount plate at the back of the light. Orient the

holes on the plate to match up with the screw holes on the back of the ﬁxture. Using the screws supplied with the V-Mount plate,

screw in the plate until it is snug against the back of the ﬁxture. Do not over-tighten the screws.

You’re now ready to install your battery to the V-Mount plate.

www.ikancorp.com | 1.713.272.8822 | [email protected] because we’re ﬁlmmakers too

Speciﬁcations

Fixture Speciﬁcations

Light Source 608 0.06 watt LEDs

Head Type Bi-Color 5600K-3200K

Lens 45 Degree

Beam Angle 50 Degree

Lumens 1218Lm

Control / Dimming Knob Control

Build Material Heavy Duty Resin Plastic

Cooling System Passive Cooling

Yoke Baby 5/8" -- Junior 1-1/8" Combo Pin

Fixture Size 14 x 8 x 3 in.

Fixture Weight 4 lbs

Electrical Speciﬁcations

Power Supply Input: 110-220VAC

Output: 15VDC @ 4.0A

Fixture Power Consumption 36.4W; 14-18VDC

Remote Control Battery

Power Type

23A 12VDC

RB5

Rayden Bi-Color Half x 1 Studio & Field LED Light

www.ikancorp.com | 1.713.272.8822 | [email protected] because we’re ﬁlmmakers too

Speciﬁcations

Fixture Speciﬁcations

Light Source 1184 0.06 watt LEDs

Head Type Bi-Color 5600K-3200K

Lens 45 Degree

Beam Angle 50 Degree

Lumens 4559Lm

Control / Dimming Knob Control

Build Material Heavy Duty Resin Plastic

Cooling System Passive Cooling

Yoke Baby 5/8" -- Junior 1-1/8" Combo Pin

Fixture Size 14 x 14 x 3 in.

Fixture Weight 6 lbs

Electrical Speciﬁcations

Power Supply Input: 110-220VAC

Output: 15VDC @ 6.0A

Fixture Power Consumption 71W; 14-18VDC

Remote Control Battery

Power Type 23A 12VDC

RB10

Rayden Bi-Color 1 x 1 Studio & Field LED Light

www.ikancorp.com | 1.713.272.8822 | [email protected] because we’re ﬁlmmakers too

RW5

Rayden Daylight Half x 1 Studio & Field LED Light

Speciﬁcations

Fixture Speciﬁcations

Light Source 608 0.06 watt LEDs

Head Type Daylight 5600K

Lens 45 Degree

Beam Angle 50 Degree

Lumens 2506Lm

Control / Dimming Knob Control

Build Material Heavy Duty Resin Plastic

Cooling System Passive Cooling

Yoke Baby 5/8" -- Junior 1-1/8" Combo Pin

Fixture Size 14 x 8 x 3 in.

Fixture Weight 4 lbs

Electrical Speciﬁcations

Power Supply Input: 110-220VAC

Output: 15VDC @ 4.0A

Fixture Power Consumption 36.4W; 14-18VDC

Remote Control Battery

Power Type

23A 12VDC

www.ikancorp.com | 1.713.272.8822 | [email protected] because we’re ﬁlmmakers too

RW10

Rayden Daylight LED 1 x 1 Light

Speciﬁcations

Fixture Speciﬁcations

Light Source 1184 0.06 watt LEDs

Head Type Daylight 5600K

Lens 45 Degree

Beam Angle 50 Degree

Lumens 4971Lm

Control / Dimming Knob Control

Build Material Heavy Duty Resin Plastic

Cooling System Passive Cooling

Yoke Baby 5/8" -- Junior 1-1/8" Combo Pin

Fixture Size 14 x 14 x 3 in.

Fixture Weight 6 lbs

Electrical Speciﬁcations

Power Supply Input: 110-220VAC

Output: 15VDC @ 6.0A

Fixture Power Consumption 71W; 14-18VDC

Remote Control Battery

Power Type 23A 12VDC

Learn More

More dynamic information at ofﬁcial website: www.ikancorp.com

Support

Contact email: [email protected]

CONDITIONS OF WARRANTY SERVICE

• Free service for one year from the day of purchase if the problem is caused by manufacturing errors.

• The components and maintenance service fee will be charged if the warranty period is expired.

Free Service will not be Provided in the Following Situations:(*Even if the product is still within the warranty period.)

• Damage caused by abuse or misuse, dismantling, or changes to the product not made by the company.

• Damage caused by natural disaster, abnormal voltage, and environmental factors, etc.

www.ikancorp.com | 1.713.272.8822 | [email protected] because we’re ﬁlmmakers too

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Equipo de iluminación de Ikan

Ikan

Ikan Mylo MSB8-3PT-KIT Manual de usuario

Ikan

Ikan LLAN-19 Manual de usuario

Ikan

Ikan RW10-3PT-KIT Manual de usuario

Ikan

Ikan IFB576 Manual de usuario

Ikan

Ikan WS-F100 Manual de usuario

Ikan

Ikan OYC15 Manual de usuario

Ikan

Ikan LS-12000E Manual de usuario

Ikan

Ikan IDMX36T Manual de usuario

Ikan

Ikan MB-2Q1Z Manual de usuario

Ikan

Ikan LSP-004 Manual de usuario

Ikan

Ikan MSB8-2PT-KIT Manual de usuario

Ikan

Ikan Rayden Manual de usuario

Ikan

Ikan Lightstar LSC-008 Manual de usuario

Ikan

Ikan Lightstar LSKT-001 Manual de usuario

Ikan

Ikan Oryon Manual de usuario

Ikan

Ikan S series Manual de usuario

Ikan

Ikan Stryder Manual de usuario

Ikan

Ikan RW5-3PT-KIT Manual de usuario

Ikan

Ikan Lyra POE Light Series Manual de usuario

Ikan

Ikan CHROMA-1F1H Manual de usuario

Ikan

Ikan CB6-2PT-KIT Manual de usuario

Ikan

Ikan RLCB60 Manual de usuario

Ikan

Ikan iLED6 Manual de usuario

Ikan

Ikan IB1000 Manual de usuario

Manuales populares de Equipo de iluminación de otras marcas

Brizo

Brizo 8SP-MU-4 Manual de usuario

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Manual de usuario

IKEA

IKEA BJÖRKSPIREA Manual de usuario

Laserworld

Laserworld Evolution Series ES-400RGB Manual de usuario

Alien

Alien RG STAR Manual de usuario

EuroLite

EuroLite LED B-40 Manual de usuario

Qazqa

Qazqa Suplux SL 3 Black 103062 Manual de usuario

Commercial Electric

Commercial Electric 54568141 Manual de usuario

CREE LIGHTING

CREE LIGHTING 304 Series Manual de usuario

Goobay

Goobay 49867 Manual de usuario

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Manual de usuario

Alkalite

Alkalite Krypton KT-81 Manual de usuario

Clas Ohlson

Clas Ohlson GU10 Manual de usuario

DTS

DTS DELTA 10 F Manual de usuario

ring

ring Solar Steplight Manual de usuario

One Stop Gardens

One Stop Gardens 57696 Instrucciones de montaje

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Manual de usuario

SIREM

SIREM Swimeo A2 Manual de usuario