IKA HB digital Manual de usuario

HB digital

ENGLISH

Fig. 1

Safety instructions�� 7

Unpacking �� 10

EU Declaration of conformity ��6

Explication of warning symbols �� 6

Interfaces and outputs �� 21

Operator panel and display �� 11

Warranty �� 27

Intended use�� 9

Error codes �� 24

Maintenance and cleaning �� 23

Operation �� 12

Technical Data �� 26

Explication of warning symbols

EU Declaration of conformity

/// Symbols used in this instruction manual

We declare under our sole responsibility that this product corresponds to the directives 2014/35/EU,

2014/30/EU and 2011/65/EU and conforms with the following standards or normative docu-

ments: EN 61010-1, EN 61010-2-010; EN 61326-1, EN 60529 and EN ISO 12100�

A copy of the complete EU Declaration of Conformity can be requested at sales@ika�com�

Source language: German

“Safety instructions” chapter

“Unpacking” chapter

+“Accessories” chapter

“Assembly” chapter

“Operation” chapter

“Error codes” chapter

“Maintenance and cleaning” chapter

“Technical data” chapter

AItem numbers

Indicates relevant device components for actions�

Correct / result

Indicates correct implementation or the result of an action step�

Incorrect

Indicates incorrect implementation of an action step�

Please note

Indicates action steps for which particular attention must be paid to a particular

detail�

Beep

Indicates action steps, for which beep sounds are to be heard�

Power outage

Indicates device restart after a power outage�

www.

Internet

Indicates action steps for which further information is included in the online

instruction manual�

›Indicates lists�

�Indicates action steps�

Safety instructions !

/// Warnings used in this instruction manual

Risk of burning at hot surfaces

�Do not touch hot surfaces without protective gloves�

�Only ﬁll or empty the device when it is cold�

�Let the components cool off before continuing work with the device�

Burns hazard due to hot tempering media

�Do not touch hot tempering media�

�Note the danger of burns in case of tempering media that have a ﬂashpoint of less than

260 °C�

�Note the danger resulting from ﬂammable materials�

�Before commissioning, read and observe the safety instructions�

�Keep the operating instruction manual accessible for all users�

/// Other risks

Risk of burning at hot surfaces

The top edge of the heating bath can heat up to temperatures above 65 °C during operation�

�Do not touch hot device components without protective gloves�

�Only ﬁll or empty the device when it is cold�

Risk of injury caused by explosion

�Do not use the device in explosive atmospheres, as it is not EX-protected�

�When using tempering media that could create explosive mixtures, take appropriate safety

measures (e�g� work under an extractor hood)�

Risk of injury caused by self-igniting tempering media

�Only heat up tempering media with a ﬂashpoint above the set safety temperature of the

heating bath�

�Ensure that the set safety temperature limit is always at least 25 °C below the ﬂashpoint of

the tempering medium in use�

�Do not touch hot tempering media�

Risk of burns due to self-igniting tempering media (also in connection with rotary

evaporator or other devices)

�For tempering media with a ﬂashpoint ≤ 260 °C: Note the danger resulting from ignition of

the medium�

�Note the danger resulting from ﬂammable materials�

Risk of injury caused by electric shock

�Only put together accessories with the power supply cable disconnected�

Damage to the device due to improper use

�Empty the heating bath before transportation�

�Never operate the heating bath without tempering medium�

�Ensure that the speciﬁed settings on the rating plate coincide with the actual power supply�

�Ensure that the power socket used is earthed (grounded contact)�

�Avoid knocks or impacts to the device and accessories�

Hazards resulting from uncontrolled restart

�After an interruption to the power supply, the device starts up again with previously set

operating mode C�

�To cut the power supply, press the device main switch or unplug the mains or device plug�

�After interrupting the power supply, ensure that the device is not unintentionally restarted�

/// Requirements for operators / users

�Ensure that only qualiﬁed persons use the device�

�Ensure that the device is only opened by a qualiﬁed technician�

�Ensure that the applicable safety and accident prevention measures are observed when

processing hazardous materials�

�Wear personal safety equipment in accordance with the hazard class of the medium that is

used�

�Inform the user about possible danger due to contact with or inhalation of media (e�g�

poisonous liquids, gases, mist, vapours, dusts or biological or microbiological materials)�

�Only work with media for which the energy input during processing is harmless� This also

needs to take into account other sources of energy such as, for example, light irradiation�

�Place device on an even, stable, clean, non-slip, dry, ﬁre-resistant surface�

�Refer to the operating instructions for the accessories�

�Always check the device and accessories for damage prior to each use� Never use damaged

parts�

�During operation with rotary evaporator: Observe the maximum ﬁlling quantity also for the

displaced piston volume�

/// Use

�The heating bath is used for tempering media� It is the user’s responsibility to to determine

which medium is tempered� The heating bath is not used for tempering foods� The heating

bath is suitable for use with rotary evaporators from IKA�

Recommended tempering media

› Water (up to 80 °C)

› Low viscosity silicone oils (50 mPas) with a flashpoint ≥ 260 °C

/// Area of use

� Indoor environments similar to that a laboratory of research, teaching, trade or industry area�

� The safety of the user cannot be guaranteed:

›

if the device is operated with accessories that are not supplied or recommended by the

manufacturer,

›

if the device is operated improperly or contrary to the manufacture’s speciﬁcations,

›

if the device or the printed circuit board are modiﬁed by third parties�

Intended use

Unpacking

/// Unpacking

Unpack the device carefully� Any damage should immediately be reported to the carrier (mail,

rail or freight forwarding company)�

/// Scope of delivery

Aheating bath

Bpower cord

Cuser guide

DUSB cable

Otros manuales para HB digital

Tabla de contenidos

Otros manuales de Equipo de laboratorio de IKA

IKA

IKA RO 10 Manual de usuario

IKA

IKA ULTRA-TURRAX T 18 digital Manual de usuario

IKA

IKA HBR 4 control Manual de usuario

IKA

IKA RV 10 basic Manual de usuario

IKA

IKA RC 5 basic Manual de usuario

IKA

IKA A11 basic Manual de usuario

IKA

IKA KS 4000 i control Manual de usuario

IKA

IKA MS 3 digital Manual de usuario

IKA

IKA RET control Manual de usuario

IKA

IKA RW 47 digital Manual de usuario

IKA

IKA ULTRA-TURRAX T 18 digital Manual de usuario

IKA

IKA LR-2.ST Manual de usuario

IKA

IKA RW 47 D Manual de usuario

IKA

IKA RC 2 GREEN control Manual de usuario

IKA

IKA HB 10 Manual de usuario

IKA

IKA Roller 6 basic Manual de usuario

IKA

IKA KMO 3 basic Manual de usuario

IKA

IKA Color Squid Manual de usuario

IKA

IKA Topolino Manual de usuario

IKA

IKA IC control Manual de usuario

IKA

IKA IKAMAG Maxi MR 1 Manual de usuario

IKA

IKA RH basic Manual de usuario

IKA

IKA RV 10.1 Guía del usuario

IKA

IKA C-MAG HS4 Manual de usuario

Manuales populares de Equipo de laboratorio de otras marcas

Qiagen

Qiagen DML 3000 Manual de usuario

Queensgate

Queensgate NANOSCAN OP400 Manual de programación

Conviron

Conviron GEN1000-GE Manual de usuario

Parr Instrument

Parr Instrument 4560 Manual de instrucciones

Integra

Integra DOSE IT Manual de usuario

Agilent Technologies

Agilent Technologies 5800 ICP-OES Manual de usuario

Endress+Hauser

Endress+Hauser Cleanfit CPA875 Manual de usuario

NI PXI-5422 Manual

Collomix

Collomix Aqix Manual de usuario

SPEX SamplePrep

SPEX SamplePrep 6875 Freezer/Mill Series Manual de usuario

Ocean Insight

Ocean Insight FLAME-NIR+ Manual de usuario

Parker

Parker ALIGN-MG-NA Manual de usuario

BD 644787 Manual de usuario

DENTAURUM

DENTAURUM Compact Megaplus Manual de usuario

Biuged Laboratory Instruments

Biuged Laboratory Instruments BGD 626 Manual de usuario

VWR

VWR SAS Super IAQ Manual de usuario

illumina

illumina MiSeqDx Manual de usuario

Yamato

Yamato BM510 Manual de usuario