English
5
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles,
and the point where they exit from the loudspeaker.
Only use attachments/accessories specified by the manufacturer.
Unplug this speaker during lightning storms or when unused for long period of time.
Always keep electric equipment out of the reach of children.
Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from
tip-over.
Refer all servicing to qualified service personnel. Servicing is required when the loudspeaker has been
damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have
fallen into the speaker, the speaker has been exposed to rain or moisture, does not operate normally, or has
been dropped.
Do not expose this speaker to dripping or splashing and ensure that no objects filled with liquids, such as
vases, are placed on the speaker.
To completely disconnect the speaker from the AC mains, disconnect the power supply cord plug from
the AC receptacle. The mains plug of the power supply cord shall remain readily operable.
The speaker should be connected to a mains socket outlet with a protective earthing connection.
Check if the specified voltage matches the voltage of the power supply you use. If this is not the case do
not connect the loudspeakers to a power source! Please contact your local dealer or national distributor.
Never use flammable or combustible chemicals for cleaning audio components.
Never expose this speaker to extremely high or low temperatures. Never operate this product in an
explosive atmosphere.
Rear panel may become too hot to touch, leave enough space for proper ventilation.
Assure free airflow behind the speaker to maintain sufficient cooling by keeping a distance of at least 10
centimeters (4”) to the wall.
Always switch off your entire system before connecting or disconnecting any cables, or when cleaning
any components.
