iiNet Piix Manual de usuario
Quick Start Guide
2iiNet Piix - Quick Start Guide
CONTENTS
Precautions and General Care 3
About 5
Installation Pack Items 5
Features 6
- Front Panel 6
- Back Panel 7
Getting Started 8
Install a SIM card 8
Install a Memory Card 9
Switching on Piix 10
Using the photo frame stand 11
How to use Piix 12
Home Menu Options 12
Navigation 13
Send Photos from your mobile phone 14
Select Photos to display in Slideshow 14
Change Photo Orientation 15
Customise Slideshow Effects 15
Change Slideshow Display Style 15
Delete a Photo 16
Set Date and Time 16
Update the Digital Photo Frame 16
Appendix 17
FAQs 17
Technical Specifications 18
3
iiNet Piix - Quick Start Guide
Precautions and General Care
To use Piix correctly and safely, please read these precautions and observe them when using the device.
(Unless otherwise specified, the term “device” refers to the Piix photo frame and its accessories.)
USING Piix SAFELY
Before connecting Piix, plug the power extender into the back of the device then into a power-point. Turn the power
point switch ON, followed by the power switch on the back of the device
•Before disconnecting Piix from the power supply, switch to OFF on the back of the device, then switch off
at the power-point.
•When using Piix, ensure that your hands are dry and keep the device away from sources of heat such as a
heater, stove top or a candle.
•Keep Piix far from electronic appliances that generate strong magnetic or electric fields, such as a
microwave oven or a refrigerator.
•Place Piix on a stable and level surface at all times.
•Place Piix in a cool and well-ventilated indoor area. Do not expose the device to direct sunlight or places
with high humidity.
•Use the devicePiix in an area with a temperature ranging from 0°C to 40°C.
•Do not block the openings on Piix with any object. Keep a minimum clear space of 10 cm around the
device for heat dissipation.
•Do not place any object (such as a candle or a water container) near Piix. If any foreign object or liquid
enters the device, stop using the device immediately, switch it off, remove all the cables connected to it.
•During electrical storms, switch off Piix at the power source, to prevent damage due to power surges.
•Keep Piix and its accessories out of the reach of small children and pets.
•Do not store or transport Piix in the same box as inflammable liquids, gases, or explosives.
4iiNet Piix - Quick Start Guide
ACCESSORY REQUIREMENTS
•Use only the accessories supplied. Otherwise, the performance of Piix may get affected including the
warranty for the device.
•Do not use the power adapter if its cable is damaged.
•Ensure that the power adapter meets the specifications indicated on Piix nameplate.
DISPOSAL
•Do not dispose of Piix and the accessories in a garbage bin.
•Dispose of them according to local regulations on disposal of electronic devices and equipment.
GENERAL CARE
•During storage, transportation, and operation of Piix, keep it dry and in a place where it
can’t collide with other objects.
•If there’s a fault, do not dismantle the device. Contact an iiNet support centre for assistance.
•Do not attempt to change the mechanical, safety, or performance design of Piix.
•If Piix is not being used for a long time, disconnect it, and remove it from the power source.
•If Piix emits any smoke or unusual sound or smell, stop using the device immediately, switch it off,
remove all cables connected to it.
•If Piix’s screen is broken or damaged by colliding with hard objects, do not touch or try to remove
the broken part. In this case, stop using the device immediately.
•Do not trample, pull, or over-bend any cable, particularly the flap covering the memory stick and SIM card
insertion points.
•Only clean the surface area of the devicePiix and switch off before you do.
•Use a clean, soft, and dry cloth to clean the device coveringPiix. Use a quality display cleaner to clean the screen.
5
iiNet Piix - Quick Start Guide
INSTALLATION PACK ITEMS
Before you start using Piix, check you have the following items:
Getting to know Piix
Thank you for choosing the iiNet 3G Digital Photo Frame – Piix.
Digital Photo Frame 1
Power adapter 1
Quick Start 1
Welcome letter with SIM card 1
NOTE:
If the articles contained in your product package do not match those in the packing list, contact iiNet.
6iiNet Piix - Quick Start Guide
FEATURES
Piix has a sleek and bright appearance for displaying in your home. It’s a quality device that displays high resolution
images. When you’re out and about, you can share your special moments with family and friends at home by sending
Piix a multimedia message from a mobile phone.
Piix also supports external SD/SDHC memory cards. A memory card can be inserted into the photo frame (next to the
sim card insertion point at the back).
Piix also has other features available from the Home menu.
FRONT PANEL
1
1
2
2
3
3
Image screen
Navigation key bar – navigation icons
Movement detection sensor -
The photo frame has a detector for
human presence and will power down
when no one is in the room – clever!
7
iiNet Piix - Quick Start Guide
REAR PANEL
FRONT PANEL - KEY AREA LED ICONS
To display the Home menu, tap the navigation key bar. The backlight turns on to display the menu icons. The menu
icons always power down after use so remember to tap the navigation key bar to light up the icons. Make your
selection by tapping the LED menu icon. The function of each is described below.
The functions of the LED icons in the navigation key bar are:
Displays the Home page menu.
Displays or hides the menu – context-sensitive menu displays when in File Manager or Slideshow options.
Move up or down to highlight an item.
Move left or right to highlight an item, or switch to the previous or next image.
Return to the previous screen or left pane.
Confirm your selection before changing the settings.
1
2
3 4 5 6
1
2
3
4
5
6
SD/SDHC memory card slot
SIM card slot
Power button
Power indicator
Support stand
Power lead plug
8iiNet Piix - Quick Start Guide
Getting started
Before you plug in Piix, you need to insert the SIM card.
INSTALL A SIM CARD
Turn Piix over to the back. Open the card slot cover flap. Be careful not to pull it right off as it’s joined at one end by a
rubber string (see diagram).
There is an embossed outline of a sim card on the cover flap which shows you what end you need to insert. The sim
card chip should be face down. Push the edge of the sim card in gently, until you hear a click sound. Replace the
cover flap and click into place.
NOTE:
To remove the SIM card, gently push the card further into the slot and then release it. The SIM card ejects
from the slot and sticks out about 2 mm. You can then remove the card.
9
iiNet Piix - Quick Start Guide
INSTALLING A MEMORY CARD
Detach the SD/SDHC memory card cover flap behind the device. Do not pull it off as it’s attached at one end by a
plastic rubber. The embossed image on the device shows the orientation the card should be in before you insert it.
Insert the memory card into the memory card slot. Push it firmly until it clicks into position. Switch on the power, first
at the power-point then on the back of Piix. Piix may automatically display the images stored on the card.
To display images on the memory card:
1. Touch to go to the home screen.
2. Select File Manager. Select the SD Card folder to view contents of memory card.
NOTE:
To remove the memory card, gently but firmly push the card further into the slot and then release it.
The card ejects, sticking out about 2 mm. You can then remove it.
10 iiNet Piix - Quick Start Guide
SWITCH ON Piix
To attach the power cord and plug, first insert Piix’s plug end into the device as shown in the image. The plug-in point
is in a vertical position inside the inset above the folded frame stand. Next, plug the power-point into a socket. Slide
the power switch on Piix to “ON” position and switch on the power-point.
NOTE:
Piix does not use batteries. It must always be plugged into a power-point.
Tabla de contenidos
