iHome MYLIFE IH-W355NB Manual de usuario
user manual
IH-W355NB
IH-W356NP
MyLife™ notebook webcam pro
5.0 megapixel max resolution Congratulations on the purchase of your
new MyLife notebook webcam pro. This
product comes with a limited lifetime
warranty.
Before using your product, please thoroughly
read and follow the instructions inside this
manual.
If you still need help, see the back page for
other support options.
If you want to know more about our
products, visit us online at
www.life-works.com.
system requirements
Windows• ®XP Service Pack 2 or
Windows Vista®
USB port (a USB 2.0 port is required for•
optimal performance)
CD-ROM drive•
your package should contain
2
user manual contents
features•2
yournewwebcam•3
installsoftware•3
connecthardware•4
useyourwebcam•4
advancedfeatures•5
specialeffects•8
productoperatingtips•10
troubleshooting•10
features
5.0 megapixel maximum resolution•
motion tracking•
4× digital zoom•
built-in microphone•
adjustable notebook mount•
user manual
(in your hands right now)
ArcSoft Magic-i™ and
WebCam Companion®
installation CD
MyLife notebook webcam pro
travel pouch
USB cable
user manual
.
3
your new webcam
lens
clip
power indicator
microphone
You must install the software before connectingnotef
your webcam to your computer.
install software
Insert the installation CD into your computer. On the1.
screen that appears, click the application you want to
install: ArcSoft Magic-i or ArcSoft WebCam Companion.
MyLife notebook webcam pro
www.life-works.com
2008© LifeWorks Technology Group LLC.
iHome™ is a trademark of SDI Technologies Inc.
used under license.
Model # IH-W355NB/IH-W356NP
exit
ArcSoft Webcam Companion®ArcSoft Magic-i™
Select a language and click2. OK.
An3. InstallShield Wizard dialog box displays. Click Next.
Click Yes to accept the license agreement, then click
Next to accept the default installation location.
4
A4. Select Program Folder dialog box displays. Click
Next.
After the application nishes installing, an5. InstallShield
Wizard Complete dialog box displays. Click Finish to
exit the wizard.
The main software installation screen displays again.6.
Repeat the above steps to install the other application. Click
exit on the main software installation screen when done.
connect hardware
Connect the USB cable between the bottom of your1.
webcam and a USB port on your computer.
connect to a
USB port on
your computer
Clip the webcam onto the top of your notebook’s screen.2.
use your webcam
You can start using your webcam immediately for video
conferencing with one of the many video conferencing
services available over the internet. Additional features
are available through the included ArcSoft WebCam
Companion and Magic-i software applications.
5
advanced features
Click Start > All Programs > ArcSoft WebCam
Companion 2 > WebCam Companion 2 to open the Start
Page.
capture still shots or video
On the1. Start Page, click Capture. The Capture window
displays.
For a still shot, click• Capture.
To record a video clip, click• Record Video. When done,
click Stop Recording.
6
monitor an area
ArcSoft WebCam Companion allows you to use your
webcam to monitor an area, recording video when there is
any motion in the area. To monitor an area:
On the1. Start Page, click Monitor. The Monitor window
displays.
Click2. Monitor Settings to congure your monitor. Click
Save when done.
Click3. Start Monitor to begin monitoring. The monitor will
record video whenever it detects motion.
Click Stop Monitor to end the monitoring session.
send snapshot
via email or FTP
when motion is
detected
motion
sensitivity
level
7
change video settings
To change video settings and access other webcam settings,
click the WebCam Settings button in the Capture window
(see “capture still shots or video” on page 5) or the Monitor
window (see “monitor an area” on page 6).
The webcam properties dialog box displays.
Here you can change image, video and camera settings.
zoom
Your webcam can zoom in as much as 4×. To change the
zoom level when using ArcSoft WebCam Companion:
Click the1. WebCam Settings button in the Capture
or Monitor window (see “change video settings” on
page 7).
The2. webcam properties dialog box displays. Select the
Camera Control tab.
Click and drag the3. Zoom slider to change the zoom
level, left to zoom out and right to zoom in.
Click4. OK.
8
view and edit still shots and video
To view the still shots or video you have captured, click Edit
on the Start Page. Here you can also edit your still shots
and video, including auto enhancing your photos.
Click the Capture tab for recordings made from the Capture
window (see “capture still shots or video” on page 5).
Click the Monitor tab for recordings made by the webcam
monitor (see “monitor an area” on page 6).
special effects
Click Start > All Programs > ArcSoft Magic-i 3 > Magic-i 3
to open the Effects Page.
Use this page to congure all special effects.
Before beginning, select your webcam (USB Video Device)
at the top of the window.
9
zoom face tracking
zoom
Your webcam can zoom in as much as 4×. To change the
zoom level when using special effects in ArcSoft Magic-i,
click the zoom buttons underneath the picture.
turn on face tracking
Face tracking keeps the camera trained on a person’s face
without mechanically moving the camera if the person
moves around in the chair. To turn on face tracking, click the
face tracking button underneath the picture.
use an avatar
An avatar is an image you use as your personal
representation online. Instead of your face showing, your
avatar displays. To use an avatar:
In ArcSoft Magic-i, select the1. Avatar tab.
1
2
3
Select an avatar.2.
Select3. Enable effect.
10
use other special effects
Various other special effects are available under the Effect
and Illustration tabs. To turn on a special effect:
Select either the1. Effect or Illustration tab, depending
on the effect you want. The Effect tab gives you various
image effects, and the Illustration tab gives you different
picture frames you can use.
1
2
3
4
Select a subcategory by clicking its title bar.2.
Select the effect you want.3.
Select4. Enable effect.
product operating tips
Yourwebcamoperatesbestifyousitabout3ft.(1m)•
from the camera. This ensures the picture is not distorted
and that the microphone can easily pick up your voice.
Click• Help > Application Help in ArcSoft WebCam
Companion or the question mark at the top right of the
ArcSoft Magic-i window for more details on how to use
each application with your webcam.
troubleshooting
situation try this
no video is
displayed
Ensure the webcam is connected to the•
computer.
Use a different USB port.•
Connect the webcam to a USB port on the•
computer, not a USB hub.
Uninstall and reinstall the software. To uninstall•
the software, click Start > Control Panel > Add
or Remove Programs, select the application
(ArcSoft Magic-i 3 or ArcSoft WebCam
Companion 2) and click Change/Remove.
video stutters
or stops
Disconnect and reconnect the webcam.•
Ensure the webcam is connected to a USB 2.0•
port(notaslowerUSB1.1port).
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Cámara web de iHome
