iHome iBT210 Manual de usuario
Questions? Contact Customer Service at 1-800-288-2792
instruction manual
iBT210
Bluetooth Wireless
Dual Alarm Clock
iBT210
Introduction
Thank you for purchasing the iHome iBT210. This product is designed to provide high
quality wireless sound for your iPad, iPhone, iPod or other Bluetooth audio device.
This instruction booklet explains the basic operation and care of the unit. Please read it
carefully and keep for future reference.
• Place the unit on a level surface away from sources of direct sunlight or excessive heat.
• Protect your furniture when placing your unit on a natural wood and lacquered finish.
A cloth or other protective material should be placed between it and the furniture.
• Clean your unit with a soft cloth moistened only with mild soap and water. Stronger
cleaning agents, such as thinner or similar materials can damage the surface of the
unit.
1
Maintenance
iBT210
Table of Contents
2
What’s Included ................................................................................................................................................ 3
Meet Your iBT210 .............................................................................................................................................4
The Display/Setting Up the Unit............................................................................................................... 5
Replacing and Installing Clock Backup Batteries.............................................................................6
Setting the Clock/Setting and Using the Alarms.........................................................................7-8
Previewing the Alarm and Turning the Alarm On/O................................................................... 8
Snooze/Display Dimmer Button/Sleep Mode/FM Radio............................................................. 9
Setting and Using FM Presets/Using FM Radio in Other Countries..................................... 10
Pairing Your Bluetooth Device ................................................................................................................11
Playing Audio Via Bluetooth .....................................................................................................................12
Using the Speakerphone Feature ...........................................................................................................12
Playing Audio via Aux-In ............................................................................................................................13
Charging Devices via USB Port............................................................................................................... 14
Battery Use Cautions and Tips.................................................................................................................15
Consumer Product Safety Guide ............................................................................................................16
FCC Information ..............................................................................................................................................17
Troubleshooting...............................................................................................................................................18
Warranty..............................................................................................................................................................19
iBT210
3
Included
• iBT210 Alarm Clock
• 100V-240V universal AC adaptor
• 2 AA batteries
power
adaptor
iBT210 alarm clock 2 AA batteries
iBT210
Meet Your iBT210
Top
4
Backup Battery Compartment
Bottom
Back
DC Jack
USB Charging Port
Aux-in Jack
FM Antenna
Answer Call/
Plus Settings
Button
Mode Button
Presets Button
Volume Down/
Volume Up Buttons
Snooze/Display Dimmer Button
Alarm 1 Button
Alarm 2 Button
Sleep/Clock
Adjust Button
Power/
Alarm
Reset
Button
End Call/
Minus
Settings
Button
Play/Pause/Pairing Button
AA
AA
Microphone
5
Setting Up the Unit
Connect the included AC adaptor to the DC jack located on
the back of the unit and connect the other end to a working
wall outlet. Extend FM antenna.
Turning the Unit ON and OFF*
1. Once the AC adaptor is properly connected, press the
Power Button located on top of the unit to turn the unit
ON. “ON” will appear briefly on the display.
2. Press the Power Button to turn the unit OFF. “OFF” will
appear briefly on the display.
*NOTE: The unit has an automatic shut o function: if no
audio is detected for 15 minutes, the unit will power o.
The Display
Alarm 1 & Alarm 2 Indicators
Battery Low Indicator
Time Display
FM Radio Indicator
AUX indicator
Bluetooth Indicator
Sleep Indicator
Wake to Indicator
outlet
RESET
RESET
TEST
TEST
5V 2A
Using the iBT210
PM/AM
Indicators
Alarm Time/Date/Radio Frequency
Wake to source:
BT (Bluetooth), FM Radio, Buzzer
Mode: BT (Bluetooth), FM Radio, Aux (MP3)
FM antenna
6
Using the iBT210
Replacing and Installing Clock Backup Batteries
Note: 2 AA batteries are included with the unit. Install them before using the unit.
This model is equipped with a battery backup circuit that will maintain the time and
alarm time settings in the event of a temporary power interruption (the display is NOT
lit). The battery backup circuit will also operate the buzzer alarm to wake you up at the
selected wake up time even if the power is out. When the backup batteries are getting
weak the Low Backup Battery Indicator will begin flashing in the display. When you see
this flashing indicator you should replace the backup batteries as soon as possible. Note:
We recommend alkaline batteries for best performance.
To install/replace the backup batteries:
IMPORTANT: When replacing the backup batteries be sure
to have the unit connected to the AC outlet to maintain all
of your settings, otherwise it will be necessary to reset the
time and alarm time after the batteries are replaced.
1. Press tab to remove the battery door located on the
bottom of the unit. If replacing batteries, remove the
exhausted batteries.
2. Insert 2 fresh AA batteries in the backup battery
compartment. Make sure the polarity of the batteries (“+”
or “-” nodes) matches the illustration.
3. Close the battery compartment door. Confirm that the
backup battery indicator is not flashing in the display.
Note: Make sure you dispose of batteries properly (see your local regulations).
Replacing Backup Battery
7
Setting the Clock
1. Press and hold the Sleep/Clock Adjust Button located on the back of the unit
for 2 seconds until the clock display flashes and a beep sounds.
2. Press the or Buttons to adjust the clock to the current time (hold for rapid
setting). Make sure you set the correct AM/PM time. The AM and PM indicators
appear to the left of the display.
3. Press the Sleep/Clock Adjust Button to confirm the time. The year will flash on the display.
4. Press the or Buttons to adjust the clock to the current year (hold for rapid
setting).
5. Press the Sleep/Clock Adjust Button to confirm the year. The date and month will flash on the
display.
6. Press the or Buttons to adjust the clock to the current date and month
(hold for rapid setting).
7. Press the Sleep/Clock Adjust Button to confirm the date and month and exit clock setting mode.
2 beeps will confirm clock setting is complete.
TIP: To toggle the clock display between standard 12 hour time and 24 hour (“military”) time
display, press the Alarm Button or Alarm Button while the display is flashing during clock
setting.
Setting and Using the Alarms
This unit features dual alarms which can be set to dierent times and alarm sources. Each is set in
the same way. Instructions are given as “Alarm Button”; use Alarm Button or Alarm Button to
set respective alarms. Note: Each step must be completed while display is flashing or step will
time-out with any changes saved.
Using the iBT210
8
Setting and Using the Alarms (Cont’d)
1. Press and hold the Alarm Button for 2 seconds until the alarm time display and alarm icon flash.
A beep sounds.
2. Press the or Buttons to adjust the alarm time to the desired time (hold for rapid setting).
Make sure you set the correct AM/PM alarm time. The AM and PM indicators appear to the right
of the alarm time display.
3. Press the Alarm Button to confirm the alarm time setting. The wake-to source will flash.
4. Press the or Buttons to select the desired wake to alarm source: Bluetooth, radio or buzzer.
Wake to Bluetooth: You will wake to the currently linked Bluetooth device. If no device is
detected, the alarm will default to buzzer.
Wake to Radio: Press the Alarm Button to confirm. Press the Presets Button to select FM preset
to wake to, or press the or Buttons to tune in a desired wake to station.
(To set Presets, see Setting and Using FM Presets on page 10.)
Wake to Buzzer: You will wake to buzzer.
5. Press the Alarm Button to confirm the alarm settings and exit alarm setting mode. 2 beeps will
confirm alarm setting is complete. The alarm icon will remain on the display, indicating the alarm
is armed.
6. At the set time, the alarm will sound for 60 minutes. To turn o a sounding alarm and reset it to
come on the next day at the same time, press the Power/Alarm Reset Button or the associated
alarm button to reset alarm.
Turning the Alarm On/O
Press and release the desired Alarm Button as needed to toggle the alarm ON (indicated by the
alarm icon) or OFF (no alarm icon).
Using the iBT210
9
Snooze/Display Dimmer Button
1. The default snooze time is 9 minutes. To adjust Snooze duration, press and hold the
Snooze/Display Dimmer Button during normal operation (when no alarm is sounding).
2. Press the or Buttons to select the desired snooze time (between 01 and 29 minutes).
3. Press and release the Snooze/Display Dimmer Button to confirm Snooze setting. 2 beeps will
sound.
4. While the alarm is sounding, press and release the Snooze/Display Dimmer Button to
temporarily silence the alarm for the set duration. Snooze can be used several times during the
60 minute alarm cycle.
5. To adjust the brightness of the display, press and release the Snooze/Display Dimmer Button
during normal operation (when no alarm is sounding) to cycle through the brightness display
settings.
Sleep Mode
Sleep to the current sound source for a set time before turning the unit o.
1. To set Sleep time, press and release the Sleep/Clock Adjust Button as needed to cycle to the
desired sleep duration:120, 90, 60, 30 or 15 minutes or OFF (turns the unit o).
2. Press the or Buttons to adjust the sleep volume on the unit. Note that the sleep volume
setting is stored separately from other volume settings.
FM Radio
Extend the FM antenna for best reception.
1. Press and release the Mode Button as needed until the FM indicator icon
and current FM radio frequency appear on the display.
2. Press the or Buttons to tune the radio to the desired station (hold
to scan for the next clear station).
3. Press the or Buttons to adjust the volume on the unit.
4. When you are through listening, press the Power/Alarm Reset Button to turn the unit o.
Using the iBT210
Tabla de contenidos
Otros manuales de Despertador de iHome
iHome
iHome iBN18 Manual de usuario
iHome
iHome iH402 Manual de usuario
iHome
iHome iH18 Manual del propietario
iHome
iHome IP43 Manual de usuario
iHome
iHome iP41 Manual de usuario
iHome
iHome iBTW38 Manual de usuario
iHome
iHome iBTW450 Manual de usuario
iHome
iHome iKT50 Manual de usuario
iHome
iHome iPL10 Manual de usuario
iHome
iHome iPL10 Manual de usuario
iHome
iHome POWERCLOCK iBT235 Manual de usuario
iHome
iHome iH11 Manual de usuario
iHome
iHome POWERVALET iW18 Manual de usuario
iHome
iHome iH11 Manual de usuario
iHome
iHome iBTW38N Manual de usuario
iHome
iHome POWERCLOCK iBT235 Manual de usuario
iHome
iHome iH33 Manual de usuario
iHome
iHome IA63 Manual de usuario
iHome
iHome iP11 Manual de usuario
iHome
iHome iBT18 Manual de usuario
