ifrogz Boost Manual de usuario
USER’S MANUAL
FEATURING NEAR FIELD AUDIO™ TECHNOLOGY
by
2. FEATURES
• First in the world to use NearFA™ (Near Field Audio™)
• Magically amplifies the sound from iPhone™ etc
• No configuration such as paring is needed
• Automatically turns on and off
1. INTRODUCTION
The Boost speaker uses patent pending NearFA™ technology.
Simply place a mobile device such as an iPhone™ on top of the
Boost speaker and the sound from the internal speaker is magically
amplified. Unlike Bluetooth® or WiFi the Boost requires no setup,
no installation, and no configuration.
This product is compatible with iPhone™ 4S, iPhone™ 4, iPhone™ 3GS, iPhone™ 3G,
iPod™ Touch 4, and other mobile devices with an external speaker.
• Supported by most iOS devices and Android phones
• Powerful output of 2W x 2 RMS
• High efficiency – 15 hours play time* for AA Akline batteries x 3
• Battery low indication
• Includes Audio in (3.5mm) and DC in (Micro USB) sockets
* Average volume levels
3. USER INTERFACE
Location Description
3 Blue LED
4 Power Button
5 Micro USB DC in
6 Audio in
4. OPERATION
4.1 Near FA™ Wireless Operation
iOS Devices:
When in Standby or Power On modes, placing an iPhone™, iPod™, or other device,
with the external sound or music being played in the correct direction activates the
speaker. Example - align the bottom of the iPhone™/iPod™ to the front of the speaker:
Android and other Devices:
Different audio devices require different positioning.
Experiment with the placement of the device until
the device and speaker sensors are in alignment.
4.2 Volume Control
To adjust the volume simply change the volume level on your mobile device and the
Boost automatically adjusts the output volume.
4.3 Audio in Operation
The 3.5mm jack is for optional wired audio input for most mobile devices, the bass
performance is better when using line-in.
5. POWER
The speaker can be powered by three AA batteries or external DC in from the
Micro USB socket.
When the batteries are first inserted, the speaker will stay in its default
Standby Mode.
5.1 Power Status:
Every time the Power Button is pressed, the power status advances one step in a
cycle as follows: Off -
>
Standby -> On -> Off. ..
5.2 Automatic Power on/off:
When the speaker is in Standby mode, if music is played while the device is placed
on top of the unit in the correct position, the speaker will turn on automatically.
The Power Status is indicated by the Blue LED:
Status Blue LED
Power On Lights up
Power Off Off
Standby Flashes once every 3 seconds (approx.)
Music Playing Synchronized with the music
Battery Low Flashes 3 times every 4 seconds (approx.)
5.3 Battery Low Indication:
The blue LED flashes 3 times every 4 seconds to indicate the battery low status.
This happens only in Standby mode. Please note that when the batteries are
relatively low, the sound may be distorted when playing in high volume.
When the batteries are too low, the system will cut off power to prevent the
batteries from being damaged.
The speaker will return to Standby mode 1 minute after the music has stopped. When
using Alkaline batteries, the speaker can stay in Standby mode for over 6 months.
When the speaker is in Power On mode, it will switch automatically to Power Off 10
minutes after the music has stopped.
5.4 External DC 5V in:
The micro USB socket is for external power of DC 5V. When the external power is
plugged in, the AA batteries will not be used.
iPhone™ and iPod™ are registered trademarks of Apple Inc.
The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc.
2. CARACTERÍSTICAS
•
Primero en el mundo en usar NearFATM (Near Field AudioTM)
•
Amplifica el sonido de un iPhoneTM etc. como por arte de magia
•
No necesita configuración tal como equiparación
•
Se enciende y se apaga automáticamente
1. INTRODUCCIÓN
Los altavoces Boost usan la tecnología NearFATM, pendiente de patente.
Simplemente ponga un aparato móvil como un iPhoneTM encima del
altavoz, y el sonido del altavoz interno se amplificará como por arte
de magia. A diferencia de Bluetooth® o WiFi, el Boost no necesita
armarse, instalarse, ni configurarse.
Este producto es compatible con iPhoneTM 4S, iPhoneTM, iPhoneTM 3GS, iPhoneTM 3G,
iPodTM Touch 4, y otros aparatos móviles que tengan un altavoz exterior.
•
Es compatible con la mayoría de los aparatos iOS y los teléfonos Android
•
Potencia poderosa de 2W x 2 RMS
•
Gran eficacia – 15 horas de reproducción* con baterías AA alcalinas 3 • Indicador de
batería baja de carga
•
Indicador de batería baja de carga
• Incluye Audio en (3.5mm) y corriente directa en tomas de corriente (Micro USB)
* Promedio de Niveles de volumen
3. INTERFAZ DE USUARIO
Ubicación
Descripción
3
LED AZUL
4
Botón de Encendido
5
Micro USB DC de entrada
6
Audio de entrada
Tabla de contenidos
Idiomas:
