
4
• ifm electronic gmbh hereby declares that the devices indicated in the
following table are in compliance with the relevant statutory
requirements.
• The full text of the Declaration of Conformity, technical data,
instructions, approvals, contacts and further information is available at
documentation.ifm.com.
WARNING! The operation of this device can cause radio interference
in residential areas.
Device Frequency Max. H-field
strength
ANT512, DTA100, DTA101, DTA200,
DTA201, DTA300, DTA301
0,125 MHz 30 dBµA/m @
10m
USA
English
ANT512 / DTA100 / DTA101 / DTA200 / DTA201 / DTA300 / DTA301
FCC information:
The devices comply with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
1. This device must not cause harmful interference, and
2. This device must accept any interference received, including
interference that may cause undesired operation.
Changes or modifications to this device that have not been expressly
approved by ifm could void the user’s authority to operate the equipment.
Note:
This equipment has been tested and found to comply with the limits for a
ClassA digital device, pursuant to part 15 of the FCCRules. These limits
are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may
cause harmful interference to radio communications. Operation of this