IEI Technology POC-W24C-ULT3 Manual de usuario

24” Medical Panel PC with Intel®Core™ i7-6600U/Core™ i5-6300U/

Celeron® 3855U CPU, 4 GB DDR RAM, Wi-Fi 802.11a/b/g/n/ac,

PCAP Touchscreen, 5-Megapixel Camera, Microphone and RoHS

POC-W24C-ULT3

Quick Installation Guide

Version 1.00

Revision

Date Version Changes

December 15, 2017 1.00 Initial release

Intended Use

The POC-W24C-ULT3 medical panel PC is intended to be used to display general

purpose medical images. The device shall not be used for diagnosis purpose or life

supporting system.

Equipment connected to analog or digital interfaces must comply with the respective

IEC Standards (e.g. IEC 60950 for data processing equipment and IEC 60601-1 for

medical equipment). Furthermore all configurations shall comply with the current

version of the standard for SYSTEMS IEC 60601-1-1. Everybody who connects

additional equipment to the signal input part or signal output part configure a

medical system, and is therefore responsible that the system complies with current

version of the requirements of the system standard IEC 60601-1-1. If in doubt,

consult the technical service department or your local representative.

Manual Conventions

WARNING

Warnings appear where overlooked details may cause damage to the

equipment or result in personal injury. Warnings should be taken

seriously.

CAUTION

Cautionary messages should be heeded to help reduce the chance of

losing data or damaging the product.

NOTE

These messages inform the reader of essential but non-critical

information. These messages should be read carefully as any

directions or instructions contained therein can help avoid making

mistakes.

Hot surface

This symbol indicates a hot surface that should not be touched without

taking care.

OPERATING INSTRUCTION

Follow operating instructions or consult instructions for use.

IEC 60417-5009: Stand-by

Overview

The POC-W24C-ULT3 is a 6th generation Intel®Core™/Celeron®CPU

powered medical-grade panel PC with a rich variety of functions and

peripherals. All POC-W24C-ULT3 models are designed for easy and

simplified integration into point-of-care (POC) applications. The system

comes with 4 GB of preinstalled DDR4 memory and supports a maximum

of 32 GB ensuring smooth data throughputs with reduced bottlenecks and

fast system access.

One RS-232/422/485 serial port, four USB 3.0 ports and four USB 2.0 ports

provide simplified connectivity to a variety of external peripheral devices.

Wi-Fi 802.11a/b/g/n/ac high speed wireless and two RJ-45 GbE connectors

allow for smooth connection of the system to an external LAN.

Front Panel

Bottom Panel

Left Panel

Rear Panel

System Specifications

LCD and Touchscreen

LCD Size 24"

Max. Resolution 1920 (W) x 1080 (H)

Brightness (cd/m2) 250

Contrast Ratio 1000:1

LCD Color 16.7M (RGB 6-bit + Hi-FRC)

Pixel Pitch (mm) 0.2745 (H) x 0. 2745 (V)

Viewing Angle (H-V) 178°/178°

Backlight MTBF 30,000 hrs (LED backlight)

Touchscreen Projected capacitive type with USB interface

Touch Controller EETI

Surface Hardness 6H

System

CPU Intel®Core™ i7-6600U/i5-6300U or Intel®Celeron®3855U

Memory

Two 260-pin 2133/1866 MHz dual-channel non-ECC

unbuffered DDR4 SO-DIMMs supported (system max. 32 GB)

Preinstalled with 4 GB memory

1 x 12 V ~ 28 V DC input jack

1 x Barcode reader connector (RJ-11)

1 x HDMI output connector

I/O Ports 1 x RS-232/422/485 serial port (DB-9 connector)

2 x GbE LAN (RJ-45 connector)

4 x USB 3.0 connectors

4 x USB 2.0 connectors (2 on side panel)

Storage One 2.5” SATA 6Gb/s HDD bay

One mSATA (reserved, PCIe Mini interface)

Audio Two 3 W speakers

Webcam & Microphone 5-megapixel CMOS front-facing camera with auto focus and

digital microphone

Expansion Interface One PCIe Mini slot (reserved for E-Window expansion)

LED Indicator RFID indicator (optional)

Connectivity

Wi-Fi and Bluetooth Intel® dual-band wireless – AC 8265, Bluetooth v4.2

(M.2 2230 module)

LAN Two GbE LAN connectors

Other Features

Mifare RFID Optional Mifare 13.56 MHz card reader (with LED indicator)

1 x LCD on/off

1 x Brightness up

1 x Brightness down

1 x Volume up

Function Keys 1 x Volume down

1 x Touch lock for cleaning

Combinations:

1 x Lock/unlock OSD

1 x Power on/off

Light Sensor Ambient light sensor for panel brightness adjustment

Cooling Method Fanless

Physical

Construction Material PC+ABS plastic with anti-bacterial material

Mounting Wall, stand and arm mounting

VESA 75 mm x 75 mm or 100 mm x 100 mm

Net Weight 7.5 kg

Dimensions (W x H x D)

594.6 mm x 379.6 mm x 60.68 mm

Environment

Temperature

-20ºC ~ 60ºC

Humidity 10% ~ 95% (non-condensing)

Storage/Transportation

Pressure 700 hPa ~ 1060 hPa

Temperature

0ºC ~ 40ºC

Humidity 10% ~ 95% (non-condensing)

Operating

Pressure 700 hPa ~ 1060 hPa

Vibration 1G

Shock

Operating Shock: 5G peak acceleration (11ms duration)

Non-Operating Shock: 15G peak acceleration (11ms

duration)

IP Level IP 65 compliant front panel

Power

Power Input 12 V ~ 28 V DC

120 W medical-grade power

adapter

(P/N:63040-010120-010-RS)

150 W medical-grade power

adapter

(P/N:63040-010150-400-RS)

Power Adapter Input: 100 V AC ~ 240 V AC,

47 Hz ~ 63 Hz, 1.4 A ~ 0.6 A

Input: 100 V AC ~ 240 V AC,

47 Hz ~ 63 Hz, 2 A ~ 0.85 A

Output: 19 V 6.32 A Output: 19 V 7.89 A

Installation Precautions

When installing the medical panel PC, please follow the precautions listed

below:

Manufacturer authorization: Do not modify this equipment

without authorization of manufacturer.

Certified Engineers: Only certified engineers should install and

modify the hardware settings.

Power turned off: When installing the medical panel PC, make

sure the power is off. Failing to turn off the power may cause

severe injury to the body and/or damage to the system.

Anti-static Discharge: If a user open the rear panel of the medical

panel PC, to configure the jumpers or plug in added peripheral

devices, ground themselves first and wear an anti-static wristband.

Mounting the System – Wall Mount

WARNING:

Use suitable mounting apparatus and be sure to secure the screws of

the mounting apparatus tightly to avoid risk of injury.

To mount the medical panel PC onto the wall, please follow the steps

below.

Step 1: Select the location on the wall for the wall-mounting bracket.

Step 2: Carefully mark the locations of the four screw holes in the bracket

on the wall.

Step 3: Drill four pilot holes at the marked locations on the wall for the

bracket retention screws.

Step 4: Align the wall-mounting bracket screw holes with the pilot holes.

Step 5: Secure the mounting bracket to the wall by inserting the retention

screws into the four pilot holes and tightening them.

Step 6: Insert the four monitor mounting screws provided in the wall mount kit

into the four screw holes on the real panel of the medical panel PC

and tighten until the screw shank is secured against the rear panel.

WARNING:

Please use the M4 screws provided in the wall mount kit for the rear

panel. If the screw is missing, the thread depth of the replacement screw

should be not more than 4 mm.

Step 7: Align the mounting screws on the monitor rear panel with the

mounting holes on the bracket.

Step 8: Carefully insert the screws through the holes and gently pull the

monitor downwards until the monitor rests securely in the slotted

holes. Ensure that all four of the mounting screws fit snugly into

their respective slotted holes.

NOTE:

In the diagram below the bracket is already installed on the wall.

Step 9: Secure the panel PC by fastening the retention screw of the

wall-mounting bracket.

Otros manuales para POC-W24C-ULT3

Tabla de contenidos

Otros manuales de Panel táctil de IEI Technology

IEI Technology

IEI Technology AFL2-12A-HM65/PC-EM-R11 Manual de usuario

IEI Technology

IEI Technology S19A/S24A-QM87i Manual de usuario

IEI Technology

IEI Technology IOVU-570M Manual de usuario

IEI Technology

IEI Technology AFL-F08A-N270 Manual de usuario

IEI Technology

IEI Technology AFL3-12C-ULT3 Manual de usuario

IEI Technology

IEI Technology AFL3-W07A-BT Manual de usuario

IEI Technology

IEI Technology INOX-F15C-ULT3 Manual de usuario

IEI Technology

IEI Technology PPC-F12B-BTi Manual de usuario

IEI Technology

IEI Technology PPC-5152-D525 Manual de usuario

IEI Technology

IEI Technology AFL-W19A Manual de usuario

IEI Technology

IEI Technology AFL2-W15A-N270/R/2G-R20 Manual de usuario

IEI Technology

IEI Technology AFL-HM55 Manual de usuario

IEI Technology

IEI Technology PPC-37 A-N26 Series Manual de usuario

IEI Technology

IEI Technology PPC-F D-ULT5 Series Manual de usuario

IEI Technology

IEI Technology AFL-17D Manual de usuario

IEI Technology

IEI Technology AFL2-W15A-N270 Manual de usuario

IEI Technology

IEI Technology IKARPC-07A-BT Manual de usuario

IEI Technology

IEI Technology PPC-F15B-BTi Manual de usuario

IEI Technology

IEI Technology IOVU-210AR-RK39 Manual de usuario

IEI Technology

IEI Technology AFL-xxA-N270 series Manual de usuario

IEI Technology

IEI Technology AFOKAR-08A-RK39 Manual de usuario

IEI Technology

IEI Technology AFL-ATOM Series Manual de usuario

IEI Technology

IEI Technology AFL3-W15C-ULT5-P-PC-4G Manual de usuario

IEI Technology

IEI Technology AFL-056A-LX Manual de usuario

Manuales populares de Panel táctil de otras marcas

FlowLine

FlowLine Data loop Manual de usuario

ALPEX

ALPEX AEx-8 P Series Manual de usuario

Ltech

Ltech E5S Manual de usuario

Harman

Harman AMX MODERO S MSD-701-L2 Manual de usuario

Acnodes

Acnodes PC 1150 Manual de usuario

AIS

AIS IP10IA99 series Manual de usuario

IBASE Technology

IBASE Technology ASTUT-152-RE1S Manual de usuario

YASKAWA

YASKAWA TP 610C Manual de usuario

B&R

B&R Power Panel C Series Manual de usuario

Beijer Electronics

Beijer Electronics X2 control Manual de usuario

AXIOMTEK

AXIOMTEK GOT321W-521 Manual de usuario

TRIDONIC.ATCO

TRIDONIC.ATCO x-touchBOX Manual de usuario

Qomo

Qomo QIT1386 Manual de usuario

DFI

DFI KS104-CD Manual de usuario

AMX

AMX AXP-PPC Guía

Sartorius

Sartorius X3 PR 5410 Manual de usuario

AMX

AMX Modero X Series Manual de usuario

Advantech

Advantech TPC-30 Series Manual de usuario