Idview Digital E-P132-X Manual de usuario
Table of Contents
Introduction …………………...………………………………………………4
Overview …………………………………………………………………………... 5
Package Checklist ………………………………………………………………….6
Block Diagram ……………………………………………………………………..7
Product Features …………………………………………………………………. 8
Product Specifications ……………………………………………………………. 9
Converter Description & Installation ………………………………… 11
Product Panel Views ………………………………………………………………11
Left Side …………………………………………………………………………… 12
Right Side …………………………………………………………………………..13
LED Indicators …………………………………………………………………….14
Terminator & Reset Button ……………………………………………………… 15
Wiring Architecture ……………………………………………………………….16
RS-232 ……………………………………………………………………………... 16
RS-422/RS-485 ……………………………………………………………………..17
Converter Configuration ………………………………………………….18
2
Initial IP Configuration …………………………………………………………...18
Device Management Utility of ETM ……………………………………………...19
Menu “View” ………………………………………………………………………20
Menu “Config” ……………………………………………………………………. 20
Web Console Configuration ………………………………………………………22
Controller Status …………………………………………………………………..23
Controller Setup …………………………………………………………………...25
Controller Updated ………………………………………………………………..31
Factory Default Setting ……………………………………………………………32
Self-Testing ……………………………………………………………………. 33
Hyper Terminal for TCP/IP WinSock …………………………………………...34
Hyper Terminal for COM Port ………………………………………………….. 372
Data Transmission ………………………………………………………………... 37
Appendix A - FAQ ………………………………………………………….. 38
Appendix B - Pin Outs and Cable Wiring ………………………………………. 39
DC Power Outlet ………………………………………………………………….. 39
RJ-45 Pin Assignment ……………………………………………………………. 39
RS-232 Pin Assignment ……………………………………………………………39
RS-485 Pin Assignment …………………………………………………………. 39
3
Introduction
We are providing new ways of connecting serial devices to a Local Area Network (LAN)
or Wide Area Network (WAN). E-P132-X TCP/IP converter is designed to operate serial
ports over 10/100M Ethernet networks. The data is transmitted via TCP/IP protocol.
Therefore control is available via Ethernet, Intranet and Internet. E-P132-X TCP/IP
converter is packaged in a aluminum case well suited for industrial environments. All
serial ports operate in common RS-232 mode , industrial RS-422 and RS-485 modes
configuration.
E-P132-X TCP/IP converter series is a low-cost, high performance design. By careful
selecting high quality with competitive prices components in the world, E-P132-X
makes network connectivity possible with affordable cost for virtually all kinds of serial
devices.
The following topics are covered in this chapter:
◎Overview
◎Package Checklist
◎
◎
◎Block Diagram
◎
◎
◎Product Features
◎
◎
◎Product Specifications
4
Overview
E-P132-X TCP/IP converter is designed to make your serial devices Internet ready
instantly. ARM-7 Series of E-P132-X TCP/IP converter makes them the ideal
choice for connecting your RS-232 or RS-422/485 serial devices—such as PLCs,
meters, and sensors to an IP-based Ethernet LAN, making it possible for your
software to access serial devices anywhere and anytime over a local LAN or the
Internet.
ARM-7 Series converter ensures the compatibility of network software that uses a
standard network API (Winsock or BSD Sockets) by providing TCP Server Mode,
TCP Client Mode, and UDP Mode. ARM-7 Series’ Virtual COM driver, software that
works with COM port can be set up to work over a TCP/IP network in no time. This
excellent feature preserves your software investment and lets you enjoy the benefits
of networking your serial devices instantly.
ARM-7 Series converter supports manual configuration via the handy web browser
console and many protocols including TCP, IP, UDP, HTTP, DHCP, ICMP, and ARP. It
is the best solution to network your serial devices.
5
Package Checklist
ARM-7 product is shipped with the following items:
1 unit of E-P132-X TCP/IP converter
1 unit of Power Adaptor (9V~12V DC, 500mA)
Documentation & Software CD
NOTE: Notify your sales representative if any of the above items is missing or
damaged.
6
Block Diagram
Low-cost devices usually are equipped with low speed processors and limited
memories. In reality, they are neither having the capability nor practicality to manage
complicated network TCP/IP protocols. ARM-7 Series is a low cost while providing
high performance network solution by converting data stream between network
TCP/IP and popular serial port signals. In stead of processing TCP/IP packets
directly, devices need only deal with those interface signals, which greatly simplifies
the complexity of TCP/IP network in linkage.
7
Product Features
□
□
□Data Conversion between RS-232/422/485 and Ethernet
Convert serial device (RS-232, RS-422, RS-485) data/signal into the TCP/IP
package data/signal and send them out with the Ethernet DataStream; or convert
the TCP/IP package data/signal into serial device data/signal.
□
□
□Dynamic IP Configuration
Support DHCP client mode, simplifying network address configuration and
management.
□
□
□Dual LAN Speed
Support 10/100 Mbps Ethernet, auto-detected.
□
□
□Server / Client Dual Modes
ARM-7 Series can be configured as network server or network client. In the client
mode, it can be installed in network which is protected by NAT router or firewall,
without the need of a real IP address.
□
□
□Web-based Setup
Parameters setup is based on HTTP protocol by using standard browsers (IE and
Netscape). No special software would be required.
□
□
□Built-in Security Control
Protected by setup password to prevent intruders.
□
□
□Firmware Remote Update
Firmware can be updated directly via Ethernet network to keep up with latest
network standards.
8
Product Specifications
CPU : 32-bits ARM-7 CPU , 25 MHz
RAM : 2 M Bytes SDRAM ( 1 M * 16Bits )
ROM : 128 K Bytes Flash ROM
Ethernet
Port Type : RJ-45 Connector
Speed : 10 /100 M bps ( Auto Detecting )
Protocol : ARP , IP , ICMP , UDP , TCP , HTTP , DHCP
Protocol (Optional)：PPPoE , PPPoM
Mode : TCP Server / TCP Client / UDP
Setup : HTTP Browser Setup (IE & Netscape) , RS-232 Console
Security : Setup Password
Protection : Built-in 1.5KV Magnetic Isolation
9
Serial Port
Port : RS-232 * 1 Port ，RS-422/RS-485 * 1 Port
Speed：300 bps~230.4 K bps
Parity：None , Odd , Even , Mark , Space
Data Bit：5 , 6 , 7 , 8
Stop Bit : 1 , 2
RS-232 Pins : Rx , Tx , GND , RTS , CTS , DTR , DSR , DCD
RS-422 : Rx+ , Rx- , Tx+ , Tx- (Surge Protect)
RS-485 : Data+ , Data- (Surge Protect)
Built –in RS-422/RS-485 Terminal Resistor
15KV ESD for all signals
Watch Dog Function
Power : DC 9 – 12 V , 500mA
Led Lamp : SYS (PWR) , LAN , Rx , Tx
Environment : Operating Temperature: 0℃～50℃
Storage Temperature : -10℃～70℃
Dimensions : 110 * 90 * 30 mm ( W * D * H )
Weight : 146 gm
10
Tabla de contenidos
