2. Getting Started G3 android full manual
Page 10 of 41 G3 android full manual
3) Charging the Battery
Before using the G3 device for the first time, charge the main battery until the green
Charging/Battery Status LED remains lit (see below picture for charge status indications).
To charge the device, use a cable or a cradle with the appropriate power supply.
A. To charge with the cradle
(1) Place the device on the cradle as illustrated below. Connect the power adapter with the cradle,
and plug it into a power outlet.
(2) Connect the charging accessory to the appropriate power source.
(3) Insert the device into a cradle or attach to a cable.
(4) The device begins charging.
(5) The Charging/Battery Status LED red while charging, then turns LED green when fully charged.
** You can also take out the battery from the device and charge it separately on a cradle.