IDPRT IMOVE T3Pro Manual de usuario

Mobile Printer

iMOVE T3Pro

USER MANUAL

Rev.1.0

Xiamen Hanin Electronic Technology Co.,Ltd.

ADD: 5F, 10# Building, Aide Airport Industrial Park, Huli District, Xiamen, China

TEL: +86-(0)592-5932525

WEB: www.idprt.com

Caution Symbol

Never touch the thermal head immediately after the printer has been used. Let the thermal

head cool for a few minutes before touching it.

This symbol is indicate that it is easily damaged. Observe the precautions for handling

electrostatic sensitive devices.

Safety Precautions

To use this product in safety, please follow the precautions given below.

WARNING

If you notice smoke, a strange smell, or a strange sound, turn off the power immediately, and remove

the USB cable and/or battery pack. Then contact the dealer.

If any foreign material (metal scraps, water, or other fluid) enters the printer, immediately turn off the

printer and remove the USB cable and/or battery pack. Then, contact your dealer for advice. Continued

use of the printer could result in a fire.

Never attempt to repair the printer yourself. Also do not disassemble or modify the product. Doing so

could lead to injury, fire, or electric shock.

Do not touch the tear bar.

There is a tear bar inside the paper outlet slot. Neither put your hand in the paper outlet slot while

printing is in progress, or put your hand into the outlet even when printing is not in progress.

The printer cover can be opened when replacing the paper. However, since the tear bar is on the

inside of the printer cover, be careful not to place your face or hands too close to the tear bar.

During and immediately after printing, the area around the thermal head is very hot. Do not touch it,

as you could be burned.

If any battery fluid gets on your skin or clothing, immediately wash the affected area with fresh water.

Otherwise, skin damage may result.

The battery pack may be hot immediately after the product has been used.

Please be sure to read



Using the Printer

Some semiconductors can be damaged by static electricity. Be sure to turn off the printer when

inserting or removing the battery pack.

Do not drop the printer or hit it against a hard object.

Do not open the printer cover while the printer is printing.

Before you open the printer cover, make sure that printing data is not being sent to the printer.

Do not unplug or plug in a USB cable while the printer is printing or during communication.

Do not touch a USB connector while the printer is printing.

Turn off the printer when you are not using it.

When the printer is used in a low temperature environment, the battery's performance will be

diminished, and the amount of time that you can use the printer for may be reduced.

Do not pull out paper while the printer cover is closed.

The heating element and the driver IC of the thermal head are easily damaged. Do not touch them

with metal objects, sandpaper, etc.

Printing quality may suffer if the thermal head heating element becomes soiled by being touched with

your hands. Do not touch the thermal head heating element.

There is a risk of damage to the driver IC of the thermal head from static electricity. Never directly

touch the IC.

Do not operate the printer if there is moisture on the front surface of the head from condensation, etc.

Thermal Paper Handling

Only use thermal paper with the designated specifications. The printing quality and working life of the

thermal head cannot be guaranteed if any paper other than that recommended is used. In particular, if

ion concentration of [Na+, K+, Cl-] is high, it may drastically reduce the working life of the thermal head.

Please exercise caution.

Store the thermal paper in a cool, dry, dark location.

Do not rub the thermal paper with a hard object.

Do not leave the thermal paper in contact with plastic film, an eraser, or adhesive tape for a long

period of time.

Do not stack the thermal paper on fresh diazo copies or wet-type copies.

Do not use chemical glue on the thermal paper.

Do not use thermal paper that has been stored for a long period .

Operating Environment for the Printer

Before actually unpacking the printer, remember the following points when doing this.

Do not use the printer in an environment in which it will be subject to strong shaking while it is printing.

Be careful to ensure that the printer is not exposed to direct sunlight.

The appropriate environment for using the printer is described below.

Temperature: -2°C to 52°C

Humidity: 30% RH to 85% RH (no condensation)

Do not place the printer near a copying machine or other device that produces a strong

electromagnetic field.

Keep the printer sufficiently removed from heaters and other sources of heat.

Use the printer in a clean, low-humidity environment that is free from dust.

Avoid using the printer in high-humidity rooms.



Printer Maintenance

Please perform the following maintenance every 6 months.

Thermal head

Dip a cotton swab in an alcohol solvent (ethanol, methanol, or isopropyl alcohol), and clean the

heating area of the head.

Platen

While turning the platen, use a soft dry cloth to lightly rub the entire surface of the platen and

remove any foreign objects.

Paper storage unit and the surrounding area

Remove any dirt, dust, pieces of paper, etc., from the paper storage unit.

Contents

1. Product Overview............................................................................................................................................1

1.1 Printer & Accessories............................................................................................................................ 2

1.2 Appearance and Components...............................................................................................................3

2. Setup................................................................................................................................................................4

2.1 Battery Pack...........................................................................................................................................4

2.1.1 Inserting into the Printer............................................................................................................ 4

2.1.2 Charging the Battery...................................................................................................................5

2.2 Bluetooth And Wi-Fi.............................................................................................................................. 8

2.3 Loading Paper........................................................................................................................................ 9

2.4 Menu Settings......................................................................................................................................12

2.5 Belt Clip................................................................................................................................................17

2.5.1 Install the Belt Clip....................................................................................................................17

2.5.2 Using the Belt Clip.................................................................................................................... 17

3. Printer Features.............................................................................................................................................18

3.1 Control Panel....................................................................................................................................... 18

3.1.1 Button.......................................................................................................................................18

3.1.2 Panel Lamp............................................................................................................................... 19

3.1.3 LCD Indication...........................................................................................................................20

3.1.4 Buzzer Description....................................................................................................................21

3.2 Self Test................................................................................................................................................22

3.3 Instruction for Standby(Sleep) Mode..................................................................................................22

4. General Specification.....................................................................................................................................23

5. Detailed Specification....................................................................................................................................25

6. Interface.........................................................................................................................................................26

6.1 USB for Battery Charge........................................................................................................................26

6.2 Bluetooth.............................................................................................................................................27

7. Specifications of Accessories.........................................................................................................................28

7.1 Battery Pack.........................................................................................................................................28

7.2 Belt Clip................................................................................................................................................28

8. Troubleshooting Procedure........................................................................................................................... 29

8.1 Troubleshooting Guide........................................................................................................................ 30

8.1.1 Power Supply Failure................................................................................................................ 30

8.1.2 Printing Failure......................................................................................................................... 30

8.1.3 Faulty Sensor............................................................................................................................ 31

8.1.4 Paper Feed Failure....................................................................................................................31

8.1.5 Error Message(Printer Status indication on the LCD)...............................................................32

9. Windows Driver Instruction.......................................................................................................................... 33

9.1 Operating System................................................................................................................................ 33

9.2 Windows Driver Preparation............................................................................................................... 33

9.3 Windows Driver Installation................................................................................................................ 33

9.4 Detailed Windows Driver Setting........................................................................................................ 37

9.4.1 Printing Preferences................................................................................................................. 37

9.4.2 Other Settings..........................................................................................................................46

9.5 Uninstalling the Driver.........................................................................................................................48

10. Utility Tool Instruction................................................................................................................................. 50

10.1 Operating System (OS) Environment.................................................................................................50

10.2 Utility Tool Preparation......................................................................................................................50

10.3 Using Utility Tool................................................................................................................................51

10.3.1 Add Printer............................................................................................................................. 52

10.3.2 Modify Printer........................................................................................................................ 54

10.3.3 Delete Printer......................................................................................................................... 56

10.3.4 Connection Test...................................................................................................................... 57

10.4 Functions........................................................................................................................................... 58

10.4.1 Print Text.................................................................................................................................59

10.4.2 Print Self Information............................................................................................................. 60

10.4.3 Download Fonts......................................................................................................................60

10.4.4 Parameter Config....................................................................................................................61

10.4.5 Command Test........................................................................................................................63

10.4.6 WIFI Configuration..................................................................................................................64

10.4.7 Download Vector Fonts.......................................................................................................... 65

10.5 Firmware Update...............................................................................................................................67

iMOVE T3Pro User Manual

1. Product Overview

This printer is perfect for mobile banking systems, retail, POS (point of sale) terminals and other forms of

mobile computing.

The characteristics of this printer are listed below:

•Light (150x120x70mm)

•Extremely light and mobile (630g including Battery pack)

•Very silent printing thru direct thermal printing method

•Print speed Max.80mm/s

•Support Bluetooth 4.0 BLE/2.1+EDR (Dual Mode)

•Belt Clip as a standard accessory

•Support text and graphic printing

•Drop-in design that makes it easy to load paper

•A printer cover that can be opened with the touch of a button

•Printer cover open detection, Paper-out detection, Label gap detection(Transmission, fixed, middle),

Black mark detection (Reflective, print back to the right, 2~3groups), Temperature detection

iMOVE T3Pro User Manual

1.1 Printer & Accessories

The printer is packaged with the following accessories.

If any of these accessories is broken or missing, please contact the dealer that you bought the product.

Note:

1) The AC adapter vary by local or region.

2) The packing materials are actually dependent on the order.

iMOVE T3Pro User Manual

1.2 Appearance and Components

iMOVE T3Pro User Manual

2. Setup

2.1 Battery Pack

2.1.1 Inserting into the Printer

1. Make sure that the printer has been turned off before you insert or remove the battery pack.

2. Insert the battery pack into the back of the printer as in the figure shown below, following the direction

of the arrow. Press down on the battery pack until the hook click into place.

3. To remove the battery back, pull back the hook, and use the opposite procedure from the one you

used to insert the battery pack.

NOTES:

This printer can only use the company's original equipment or approved special battery, otherwise, it may

cause damage to the product, battery leakage, fire or explosion.

Tabla de contenidos

Otros manuales de Impresora de iDPRT

iDPRT

iDPRT SP406 Manual de usuario

iDPRT

iDPRT SP420 Manual de usuario

iDPRT

iDPRT iE4P Manual de usuario

iDPRT

iDPRT SP406 Manual de usuario

iDPRT

iDPRT SP426 Manual de usuario

iDPRT

iDPRT SP900 Manual de usuario

iDPRT

iDPRT SP310 Manual de usuario

iDPRT

iDPRT CP-D80 Manual de usuario

iDPRT

iDPRT iMOVE 3Pro Manual de usuario

iDPRT

iDPRT iT4B Manual de usuario

iDPRT

iDPRT iT4B Manual de usuario

iDPRT

iDPRT SP410 Manual de usuario

iDPRT

iDPRT iT4B Manual de usuario

iDPRT

iDPRT SP410 Manual de usuario

iDPRT

iDPRT HPL3D2303 Manual de usuario

iDPRT

iDPRT iT4 Series Manual de usuario

Manuales populares de Impresora de otras marcas

Lexmark

Lexmark 1400 Series Manual

Canon

Canon i70 Series Manual de usuario

Evolis

Evolis Elypso Manual de usuario

Kyocera

Kyocera FS-9530DN Manual de usuario

Canon

Canon LASER SHOT LBP-1210 Manual de usuario

Samsung

Samsung BIXOLON SRP-350plusF Manual de usuario

Canon

Canon PIXMA PRO-1 Series Manual de usuario

Canon

Canon PIXMA G3560 Guía de configuración

Dell

Dell Color Laser Printer 2130cn Manual de usuario

Tektronix

Tektronix Phaser 840 Manual de usuario

Epson

Epson ET-7750 Instrucciones de funcionamiento

Canon

Canon CLBR 460ps Manual de usuario

Eltron

Eltron P210 Guide Manual de usuario

Ricoh

Ricoh MD-P1 Manual de usuario

Epson

Epson SC-F7100 series Manual de usuario

Epson

Epson Stylus C40UX Manual de usuario

Canon

Canon imagePASS-A2 Manual de usuario

Canon

Canon S820D Manual de usuario

iDPRT iMOVE T3Pro Manual de usuario

Manuales populares de Impresora de otras marcas