IDOT BX2 Manual de instrucciones

FCC Declaration of Conformity

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) this device may not cause harmful interference, and (2)

this device must accept any interference received, including interference that may

cause undesired operation.

For questions related to the EMC performance of this product, contact:

iDOT.com

Building 6, Suite 100

9715 Burnet Road

Austin, Texas USA 78758 USA

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by one or more of the following

measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and the receiver.

• Connect the equipment to an outlet on a circuit other than the one to which the

receiver is connected.

Part Number Edition Date

DOC1014 First November 1998

iDOT.computers, iDOT.com, and PCs for Smarties are trademarks of iDOT.com, Inc. All other brand names and

product names are trademarks or registered trademarks of their respective companies.

in any form, including translation to another language, without the prior written consent of iDOT.com, Inc.

iDOT.com

Building 6, Suite 100

9715 Burnet Road

Austin, Texas 78758 USA

512-684-5000

www.idot.com

Contents 3

&RQWHQWV

Welcome

Package checklist. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Ordering options and replacement parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Contacting iDOT.com . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

1Working with BX2 System Hardware

Removing the chassis cover. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Location of main system components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

BX2 system mainboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Mainboard features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Front panel connections. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Speaker. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Power LED and keylock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Reset. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Turbo LED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

IDE LED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

ATX power on/off switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Back panel connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Serial port (COM1, COM2). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Parallel port (PRT). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

PS/2 keyboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

PS/2 mouse. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Universal Serial Bus (USB1 and USB2) . . . . . . . . . . . . . . . . . . . . . . . 18

BX2 Systems User’s Handbook

4Contents

Installing and removing RAM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Installing DIMMs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Removing DIMMs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Installing IDE devices (HDD, CD-ROM) . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Installing floppy disk drives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Installing expansion cards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Device pin assignments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Wake-On-LAN (JP44) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Infrared (IR1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

CPU cooling fan. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Chassis cooling fan. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

ATX power supply. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Power-on By Keyboard jumper (JP10) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Clearing and resetting CMOS memory (JP5) . . . . . . . . . . . . . . . . . . . . . . . . 27

Replacing the battery. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

2Using the CMOS Setup Utility

Running the CMOS Setup utility. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Selecting items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Modifying selected items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Hot keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Saving settings and exiting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Exiting without saving settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Configuring CPU settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Setting CPU frequency. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

L2 cache memory. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

System boot control settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Power management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

CPU device monitoring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

BX2 Systems User’s Handbook

Contents 5

Standard CMOS Setup menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Date and time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Hard disks type and mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Floppy drives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Video. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Halt on. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

BIOS Features Setup menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Virus warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Cache memory options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

System boot control settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Typematic settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Security option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Other control options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Chipset Features Setup menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

Power Management Setup menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

PM timers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

PM events . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

Reload global timer events . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

PNP/PCI Configuration Setup menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

PNP/PCI configuration controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

PNP/PCI configuration setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

Load setup defaults. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

Load BIOS defaults. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

Integrated Peripherals menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

IDE device controls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

Keyboard controls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

FDC controls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

Onboard serial ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

Onboard parallel ports. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

Multi-I/O addresses. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

BX2 Systems User’s Handbook

6Contents

Supervisor password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

User password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

IDE HDD auto detection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

Welcome 7

:HOFRPH

Package checklist

In addition to this book, your iDOT.com™ BX2 systempackage should

include the items listed below. If any item is damaged or missing,

contact the iDOT.com Customer Service Department at

888-315-9563.

■setup instructions (fold-out poster)

■BX2 computer

■mouse

■keyboard

■power cable

■modem cable (if your system includes a modem)

■monitor (if you ordered a monitor)

■Microsoft®Windows®98 documentation, and Certificate of

Authenticity.

Note

The Product ID number, which you’ll need to set up your

system, is on the

Certificate of Authenticity

Ordering options and replacement parts

BX2 Systems User’s Handbook

8Welcome

Ordering options and replacement parts

For complete information about options and replacement parts

available for your BX2 system, see the iDOT.com Web site:

www.idot.com.

Contacting iDOT.com

For the most up-to-date information about your BX2 system and for

sales or technical support, go to the iDOT.com Web site at

www.idot.com. You can also contact iDOT.com at these numbers:

Customer Service 888-315-9563

Sales 888-388-4368

Technical Support 888-316-6302

Chapter1. WorkingwithBX2System Hardware 9

:RUNLQJZLWK

%; 6\VWHP+DUGZDUH

This chapter provides instructions for changing or upgrading

BX2 system hardware.

Static electricity can damage integrated circuits. Before

handling any computer component outside its protective

packaging, use one of these methods to discharge static

electricity in your body:

• After you turn off the main switch on the back of the computer

and remove the chassis cover, touch a metal computer

component (such as the power supply).

• Wear a static wrist strap that is connected to a natural earth

ground.

Do not handle add-on cards by their “gold finger” connectors.

Fingers have oils and other contaminants that can prevent

connectors from making an electrical connection, which may

cause errors or other malfunctions. Handle all system

components by their mounting brackets or other edges.

Warning

Removing the chassis cover

BX2 Systems User’s Handbook

10 Chapter 1. WorkingwithBX2SystemHardware

Removing the chassis cover

1. Turn off all peripheral devices connected to the system.

2. Turn off the primary power switch on the back of the system.

3. Unplug the system’s power cord.

Follow the steps shown in the illustration:

4. Remove screw.

5. Press

pressure-release

tabs.

6. Pull the side

panel back about

½ inch, then pull

the panel out,

away from the

system.

Tabla de contenidos

Otros manuales de De oficina de iDOT

iDOT

iDOT M2 System Manual de instrucciones

iDOT

iDOT BeOS Series Manual de instrucciones

iDOT

iDOT M2 System Manual de instrucciones

iDOT

iDOT V Series Manual de instrucciones

iDOT

iDOT Explora Manual de instrucciones

Manuales populares de De oficina de otras marcas

HP m9060n - Pavilion - Elite Hoja de especificaciones

Asus

Asus E210 Series Manual de usuario

Dell

Dell Inspiron 600m Manual de usuario

Dell

Dell Inspiron 3662 Manual de usuario

TotalFlow

TotalFlow uFLO Manual de usuario

HP Presario SV7000 - Desktop PC Manual de usuario

HP ProDesk 400 G5 Manual

Logitech

Logitech MK320 Manual de usuario

Dell

Dell XPS 730 H2C Manual de usuario

Sony

Sony Vaio Series Manual de usuario

Sony

Sony VGC-LT32E - Vaio All-in-one Desktop Computer Manual de usuario

Alto

Alto MD 250 Manual de usuario

Lenovo

Lenovo ThinkCentre Edge 72 Manual

Lenovo

Lenovo ThinkStation D20 Manual

Arbor Technology

Arbor Technology FPC-7800 Series Manual de usuario

Sony

Sony VAIO VGX-TP1 Series Manual de usuario

Asus

Asus Eee Box B204 Manual de usuario

Dell

Dell Optiplex 9010 All In One Manual de usuario

iDOT BX2 Manual de instrucciones

Manuales populares de De oficina de otras marcas