idinio 140110 Manual de usuario
MV#: 20190715 13:12
SMART CAMERA / DOORBELL
SLIMME CAMERA/DEURBEL
SMART KAMERA / TÜRKLINGEL
ART.NR.: 140110
Fig. 1
A x 2 B x 2
C x 3
i
AC 8V~24V
External
power port
Microphone
Button
Status Light
Camera
SD card slot
Speaker
Reset
Mini USB
AC 8V~24V
B
A
A
C
C
C
B
A
A
C
AC 8V~24V
Press the button to activate the doorbell
∙ Red light solid on: the camera or network is abnormal
∙ Red light blinking: awaiting WiFi connection, or currently
connecting (faster blinking)
∙ Blue light solid on: camera running correctly
Captures sound for your video
Supports local SD Card storage (Max.128G)
Press and hold on for 5 seconds with pin to reset the doorbell
(unable to unbind the bell from account)
Power Port:
Doorbell button:
Status light:
Microphone:
Micro SD card slot:
Reset:
Functions
Shared device
The doorbell device can be shared with friends, and friends can also preview
online. There is no limit to the number of sharing devices, but only 6 accounts
are supported for online preview at the same time.
Full-duplex audio
When the visitor push the doorbell button, you will get a call. You can see and
hear the vistor in your App from the doorbell if you answer.
Motion detection
Motion sensors will notify you when movement is detected.
Record
Record every moment using high capacity SD card storage.
Day & Night
Powerful night vision means no interruptions, even in complete darkness.
MICRO
SD
10
Box contents
Electrical safety
∙ To reduce risk of electric shock, this product should only be opened by an
authorized technician when service is required.
∙ Do not use the product if the cable or plug is damaged or defective.
When damaged or defective, it must be replaced by the manufacturer or an
authorised repair agent.
∙ Before use, always make sure that the voltage is the same as the voltage on the
rating plate of the device.
∙ Make sure that the cable does not hang over the edge of a worktop and cannot
be caught accidentally or tripped over
A x 2 B x 2
C x 3
i
AC 8V~24V
External
power port
Microphone
Button
Status Light
Camera
SD card slot
Speaker
Reset
Mini USB
AC 8V~24V
B
A
A
C
C
C
B
A
A
C
Use of the product / Installation
1. Download and install the “Idinio“ app from the Apple App Store or Google Play
Store on your mobile device.
2. Activate the “Idinio“ app.
3. Create a new account or log in to your existing account.
4. Click on “+” to add the product.
5. Select the product type from the product list.
6. Check the product and connect it to the mains. (possibly at a temporary
location with regard to the supplied USB cable MAX 5V 1.0A DC input)
7.
• If the status indicator is not flashing:
Press the reset* button for 10 seconds.
• If the status indicator is blinking:
Confirm in the app.
8. Confirm the Wi-Fi network and password.
9. Scan the QR code in the App with the camera. The product gives a sound
signal and you must confirm this in the App
10.Enter the name of the product. Note: The name of the product will also be
used for push notifications.
11. Place the product at the desired location
A x 2 B x 2
C x 3
i
AC 8V~24V
External
power port
Microphone
Button
Status Light
Camera
SD card slot
Speaker
Reset
Mini USB
AC 8V~24V
B
A
A
C
C
C
B
A
A
C
A x 2 B x 2
C x 3
i
AC 8V~24V
External
power port
Microphone
Button
Status Light
Camera
SD card slot
Speaker
Reset
Mini USB
AC 8V~24V
B
A
A
C
C
C
B
A
A
C
Option 1: Flat mounting
1.Mark screws position
1.Mark screws position
4.Fixed bracket 5.Install the doorbell into the bracket
2.Nailed expansion screw
3.Fit the mounting bracket to
the angle adjustment device
2.Nailed expansion screw
3.Fixed bracket
4.Install the doorbell into the bracket
Option 2: Mounting at
can angle
*
A x 2 B x 2
C x 3
i
AC 8V~24V
External
power port
Microphone
Button
Status Light
Camera
SD card slot
Speaker
Reset
Mini USB
AC 8V~24V
B
A
A
C
C
C
B
A
A
C
Connect the external USB bell with the Smart doorbell
1. Connect the USB bell with an adapter (5V 1A output).
Briefly press the RESET button to pair the doorbell.
- Blue light blinking: Awaiting for configuration.
- Blue light solid on: Configuration completed.
(To restore to factory settings: press and hold the RESET button for 5s)
2. Select the product in the App
1.
2.
3. 4.
Connect the external USB bell with the Smart doorbell
3. Go to Bell settings.
Connect the external USB bell with the Smart doorbell
4. Change the Bell settings to “Wireless call”
5.4.
6. 6.
Connect the external USB bell with the Smart doorbell
6.
- Go to ring settings
- Select the desired ringtone
Otros manuales para 140110
1
Tabla de contenidos
Idiomas:
Otros manuales de Accesorios de idinio
