Identiv UTrust TouchSecure Wall Mount Manual de usuario

TouchSecure® WallMount User Manual

IDT.QM.P2.T1.DT

Ver1.0

Page 1 of 15

Printed copies of this document are uncontrolled

Internal Use Only

User Manual for

uTrust TS WALL MOUNT

Physical Access Control Readers

Version 1.4

Document number: 81x003

Confidential

TouchSecure® WallMount User Manual

IDT.QM.P2.T1.DT

Ver1.0

Page 2 of 15

Printed copies of this document are uncontrolled

Internal Use Only

Version History

Date

Version

Description of Changes

Author

10-July-15

1.0

Initial version

Suresh Kumar T

09-Oct-15

1.1

Wiegand length details modified

Suresh Kumar T

20-Nov-15

1.2

Updated input voltage range and added

document number

Sudhan

10-Dec-15

1.3

Current ratings updated as per comments from

Sudhan

14-Dec-15

1.4

Document updated as per review comments from

Sudhan

TouchSecure® WallMount User Manual

IDT.QM.P2.T1.DT

Ver1.0

Page 3 of 15

Printed copies of this document are uncontrolled

Internal Use Only

Contents

1.0 Introduction ................................................................................................................................4

2.0 Reader .........................................................................................................................................4

2.1 Functionality..............................................................................................................................4

2.2 Touch Secure® reader with Casing .........................................................................................4

2.3 Back Plate.................................................................................................................................5

2.4 Reader Variants........................................................................................................................5

3.0 Product details ...........................................................................................................................6

4.0 Specifications.............................................................................................................................6

4.1 Rated current at different operating voltages ...........................................................................7

4.1.1 Rated current for Model 8100............................................................................................7

4.1.2 Rated current for Model 8110............................................................................................7

4.1.3 Rated current for Model 8130............................................................................................8

4.1.3.1 Rated current for 6-16V input......................................................................................................8

4.1.3.2 Rated current for POE.................................................................................................................9

5.0 Installation details......................................................................................................................9

5.1 Parts List...................................................................................................................................9

5.2 Recommended Infrastructure...................................................................................................9

5.3 Wiring Information...................................................................................................................10

5.3.1 Cable Color codes for Pig Tail Reader............................................................................10

5.3.2 Pin out for Phoenix Connector Reader ...........................................................................10

5.4 Mounting the Reader..............................................................................................................11

5.4.1 Location of mounting holes on wall.................................................................................11

5.4.2 Reader Installation Steps ................................................................................................12

5.5 Power up and Testing.............................................................................................................14

6.0 Certifications ............................................................................................................................14

6.1 FCC.........................................................................................................................................14

6.2 IC ............................................................................................................................................14

6.3 CE...........................................................................................................................................14

6.4 UL 294 ....................................................................................................................................15

6.4.1 UL 294 access control performance levels .....................................................................15

TouchSecure® WallMount User Manual

IDT.QM.P2.T1.DT

Ver1.0

Page 4 of 15

Printed copies of this document are uncontrolled

Internal Use Only

1.0 Introduction

This document details the Physical Access Control Reader TouchSecure® and its basic operational

and installation procedures. It covers the details of the Wall mount form-factor reader.

Model: Connectivity/Standard WM

The reader comes in two variants for interfacing with the control panel

•Pigtail – 8100ABP, 8110ABP

•Phoenix connectors – 8100ABT, 8110ABT, 8130ABC

•P-refers to Pigtail, T- refers to Terminal (Phoenix header)

The reader comes in three variants in functionality

•Standard HF Only - 8100ABP, 8100ABT

•Standard HF LF - 8110ABP, 8110ABT

•Connectivity HF LF - 8130ABC

•P-refers to Pigtail, T- refers to Terminal (Phoenix header), C- refers to connectivity

•In connectivity, Only Terminal version is available.

2.0 Reader

2.1 Functionality

TouchSecure® is a physical access reader that can read HF and LF contactless credentials .The

reader can interface with an access control system equipped with a Wiegand or RS485 serial

interface Control Panel. It can also be interfaced with a Host Sever / Control Panel that supports

Ethernet interface. User interfaces include RGB LED’s and Buzzer.

The reader consists of the following main parts.

2.2 Touch Secure® reader with Casing

TouchSecure® WallMount User Manual

IDT.QM.P2.T1.DT

Ver1.0

Page 5 of 15

Printed copies of this document are uncontrolled

Internal Use Only

2.3 Back Plate

2.4 Reader Variants

TouchSecure® WallMount User Manual

IDT.QM.P2.T1.DT

Ver1.0

Page 6 of 15

Printed copies of this document are uncontrolled

Internal Use Only

3.0 Product details

Model Name : Connectivity/Standard Wall Mount

Device Type : RFID reader, 13.56MHz (HF) / 125 KHz (LF)

Physical Access control Reader (accessory equipment)

Type of equipment : Potted reader.

Suitable for Indoor Use – 8130ABC and

Outdoor use – 8100ABP, 8100ABT, 8110ABP, 8110ABT

Interface Type : Pigtail Cable (11 Core + Drain) or Phoenix connectors and RJ45

Voltage Rating (8130ABC) : 6-16V DC or 48VDC on RJ45 Connector

Voltage Rating (All other models): 5-16V DC

Communication protocol : Wiegand, RS485 (2wire - Half Duplex), 10BaseT ETH

* Communication via Wiegand was evaluated by UL and serves as the interface between the reader

and panel. Communication via RS485, OSDP or Ethernet was not evaluated by UL

4.0 Specifications

Model

Operating

Voltage

Current @ 12V

Operating temp

8100ABP

8100ABT

STANDARD HF

ONLY

5-16 VDC

Refer graph in

section 4.1

-35 to +65 Deg C

8110ABP

8110ABT

HF LF

5-16 VDC

Refer graph in

section 4.1

8130ABC

HF LF

CONNECTIVITY

6-16 VDC

Refer graph in

section 4.1

0 to +49 Deg C

POE@ 48VDC

* POE sourcing equipment shall be UL 294 or UL 294B Listed with Class 2 output

•When the readers use POE as a power source, the power input wiring from the control unit

(i.e. Red and Black for 8130) shall be disconnected

•The maximum length of the Ethernet cable when using POE as the power source in UL

installations is limited to 30 meters (98.5 feet)

•There shall be no connections made to the RS-485 interface ( RS485+ and RS485-) for UL

installations

Note: Standby Power is not provided by the Card Readers. The Standby Power Level is dependent

on the external power source connected to the Card Reader.

•All wiring or cables to the Card Readers shall be the shielded type

TouchSecure® WallMount User Manual

IDT.QM.P2.T1.DT

Ver1.0

Page 7 of 15

Printed copies of this document are uncontrolled

Internal Use Only

•Only UL Listed POE sourcing equipment, or UL Listed power-limited power supply, or power-

limited output from UL Listed control panel shall be used for the Power-Over- Ethernet

feature. Cat 5e cabling is the minimum performance category recommended. These Card

Readers when using POE feature are not intended for outside wiring as covered by Article

800 of the US National Electrical Code, NFPA 70.

4.1 Rated current at different operating voltages

4.1.1 Rated current for Model 8100

Voltage (V)

Average Current (mA)

Peak Current (mA)

147

166

150

178

116

138

114

100

4.1.2 Rated current for Model 8110

Voltage (V)

Average Current (mA)

Peak Current (mA)

147

166

150

178

116

138

114

100

TouchSecure® WallMount User Manual

IDT.QM.P2.T1.DT

Ver1.0

Page 8 of 15

Printed copies of this document are uncontrolled

Internal Use Only

4.1.3 Rated current for Model 8130

4.1.3.1 Rated current for 6-16V input

Voltage (V)

Average Current (mA)

Peak Current (mA)

280

308

261

292

217

257

172

202

148

173

131

156

TouchSecure® WallMount User Manual

IDT.QM.P2.T1.DT

Ver1.0

Page 9 of 15

Printed copies of this document are uncontrolled

Internal Use Only

4.1.3.2 Rated current for POE

Voltage (V)

Average Current (mA)

Peak Current (mA)

5.0 Installation details

Wiring methods shall be in accordance with the National Electrical Code (ANSI/NFPA70), local codes,

and the authorities having jurisdiction.

5.1 Parts List

•TouchSecure® reader -1

•Screws (A #6-18X1.5" SS ) - 4Nos – Back Plate mounting screws for Wall

•Snake Eye Screw (SMF #6-32X5/16" SS) – 1 No- Top casing mounting security screw

•Screws (SMF #6-32x3/8" SS) - 3 No’s - 1 casing to back plate mounting screw and 2 Junction

Box mounting screws

•Nylon anchor plug -4 Nos

•6 pin phoenix plug (Phoenix connector version only) – 2 Nos

•Back Plate

5.2 Recommended Infrastructure

•All cabling and wiring shall be UL Listed and/or UL Recognized

•All readers shall be powered by UL listed POE sourcing equipment, UL listed power-limited

power supply, or power-limited output from UL listed control panel

TouchSecure® WallMount User Manual

IDT.QM.P2.T1.DT

Ver1.0

Page 10 of 15

Printed copies of this document are uncontrolled

Internal Use Only

•There shall be no connections made to the RS-485 interface ( RS485+ and RS485-) for UL

installations

•Cable Wiegand - 22AWG Shielded cable. ( Cable P No : ALPHA WIRE, P/N 1299/10C)

•Cable RS485 - RS485 for 1000m** (4000ft) 24AWG STP

•Cable RJ45 - Cat5e / Cat6

•Linear DC PS - 5-16 V, 1A min.

** Tested in lab conditions up to 115Kbaud

5.3 Wiring Information

5.3.1 Cable Color codes for Pig Tail Reader

Red &

+ VDC 12V (nominal)

Black & White

Ground

Green

Wiegand Data 0

White

Wiegand Data 1

Orange

LED Green

Yellow

Buzzer

Blue

Hold

Brown

LED Red

Grey

RS485 -

Pink

RS 485 +

Violet

Tamper Output

Black / Drain

Shield Ground

Table 2

& - Do not connect when reader is powered by Power over Ethernet

5.3.2 Pin out for Phoenix Connector Reader

Tabla de contenidos

Otros manuales de Controladores de acceso IP de Identiv

Identiv

Identiv MobilisID Instrucciones de montaje

Identiv

Identiv ENTERPHONE MESH 19 Manual de usuario

Identiv

Identiv Freedom Bridge FB3 Manual de usuario

Manuales populares de Controladores de acceso IP de otras marcas

ZKTeco

ZKTeco SpeedFace-V5L Manual de usuario

Jantar

Jantar REX A-1-9 Manual de usuario

2N Access Unit Hoja de instrucciones

Kedacom

Kedacom KSCA120 Series Manual de usuario

H3C

H3C WX2880X Manual de usuario

G4S

G4S S870-EX Guía

PRASTEL

PRASTEL M2000PE Manual de usuario

Allegion

Allegion interflex IF-281 Cylinder Manual de usuario

TECOM

TECOM TS1067E Manual de usuario

Fermax

Fermax Memokey 100C Guía del usuario

Fermax

Fermax CITYLINE MEMOKEY Manual de instrucciones

Software House

Software House iSTAR Pro 2U RM Manual de instrucciones

AKCP

AKCP SP+ Manual de usuario

Bpt

Bpt HNA/102 Manual de usuario

Civintec

Civintec CV9601T-T-1F Manual de usuario

BioMax

BioMax N-X90W Manual de usuario

ZKTeco

ZKTeco OP-200 Manual de usuario

FingerTec

FingerTec s-Kadex Manual de usuario

Identiv uTrust TouchSecure Wall Mount Manual de usuario

Manuales populares de Controladores de acceso IP de otras marcas