2
SPECIFICATIONS
Model
5V DC output PS5R-VB05 ---
12V DC output PS5R-VB12 PS5R-VC12 - -
24V DC output PS5R-VB24 PS5R-VC24 PS5R-VD24 PS5R-VF24
Output Capacity 15W (5V Model is 10W) 30W 60W 120W
Input
Rated Input Voltage
(Single-phase two-wire)1100 to 240V AC
(Voltage range: 85 to 264V AC/100 to 370V DC) (Load ≤ 80% at 100-105V DC)
Frequency 50/60 Hz
Input Current (Typ.)
100V AC 5V: 0.25A
12V, 24V: 0.35A 0.7A 1.3A 1.4A
230V AC 5V: 0.14A
12V, 24V: 0.19A 0.3A 0.8A 0.7A
Inrush Current (Typ.) 100V AC 18A (Ta = 25°C, cold start)
230V AC 45A (Ta = 25°C, cold start)
Leakage Current 120V AC 0.5mA max.
230V AC 1.0mA max.
Efciency (Typ.)
(at rated output)2
100V AC 5V: 77%, 12V: 82%, 24V: 84% 12V: 83%, 24V: 85% 86% 88%
230V AC 5V: 73%, 12V: 80%, 24V: 81% 12V: 85%, 24V: 87% 86% 89%
Power Factor (Typ.) 100V AC — — — 0.99
230V AC ———0.92
Output
Rated Voltage/Current 5V/2.0A3, 12V/1.3A, 24V/0.65A 12V/2.5A, 24V/1.3A 24V/2.5A 24V/5A
Adjustable Voltage Range ±10%
Output Holding Time
(Typ.)
(at rated output)
100V AC 5V: 53ms, 12V: 34ms, 24V: 36ms 12V: 13ms, 24V: 15ms 13ms 30ms
230V AC
5V: 330ms
12V: 215ms
24V: 230ms
12V: 110ms
24V: 110ms 105ms 33ms
Start Time
(at rated input and output)
500ms max. 600 ms max. 800 ms max. 700 ms max.
Rise Time
(at rated input and output)
5V, 12V: 200ms max. 24V: 250ms max.
200ms max.
Regulation
Input Fluctuation 0.4% max.
Load Fluctuation 5V: 2.5% max. 12V, 24V: 1.0% max. 1.0% max.
Temperature Change 0.05%/oC max. (-10 to +65°C )
12V: 0.05%/°C max. (-10 to +50°C)
24V: 0.05%/°C max. (-10 to +55°C)
0.05%/C max. (-10 to +55°C ) 0.05%/°C max. (-25 to +55°C )
Ripple
(including noise)
5V:
8% p-p max. (-25 to -10°C)
12V:
6% p-p max. (-25 to -10°C)
24V:
4% p-p max. (-25 to -10°C)
12V:
6% p-p max. (-25 to -10°C)
24V:
4% p-p max. (-25 to -10°C)
4% p-p max. (-25 to -10oC) 4% p-p max. (-25 to -10°C)
5V: 5% p-p max. (-10 to +0°C)
12V: 2.5% p-p max. (-10 to +0°C)
24V: 1.5% p-p max. (-10 to +0°C)
12V:
2.5% p-p max. (-10 to +0oC)
24V:
1.5% p-p max. (-10 to +0°C)
1.5% p-p max. (-10 to +0°C) 1.5% p-p max. (-10 to +0°C)
5V: 2.5% p-p max. (0 to +65°C)
12V: 1.5% p-p max. (0 to +65°C)
24V: 1% p-p max. (0 to +65°C)
12V: 1.5% p-p max. (0 to +50°C)
24V: 1% p-p max. (0 to +55°C)
1% p-p max. (0 to +55°C) 1% p-p max. (0 to +55°C)
Overcurrent Protection
105% min. (auto reset)
Operation Indicator LED (green)
Dielectric
Strength
Between input and output terminals
3,000V AC, 1 minute
Between input and ground terminals
2,000V AC, 1 minute
Between output and ground terminals
500V AC, 1 minute
Insulation Resistance Between input and output terminals: 100M min. (500V DC megger)
Between input and ground terminals: 100M min. (500V DC megger)
Operating Temperature4–25 to +75°C –25 to +70°C –25 to +65°C
Operating Humidity 20 to 90% RH (no condensation)
Storage Temperature –25 to +75°C
Storage Humidity 20 to 90% RH (no condensation)
Vibration Resistance 10 to 55Hz, amplitude 0.375mm, 2 hours each in 3 axes
(when used with BNL6 end clips)
10 to 55Hz, amplitude 0.33mm, 2 hours each
in 3 axes
(when used with BNL6 end clips)
10 to 55Hz, amplitude 0.375mm, 2 hours
each in 3 axes (when used with BNL8
end clips)
10 to 55Hz, amplitude 0.21mm, 2 hours
each in 3 axes
(when used with BNL6 end clips)
10 to 55Hz, amplitude 0.375mm, 2 hours
each in 3 axes (when used with BNL8
end clips)
Shock Resistance 300 m/s2 (30G), 3 times each in 6 directions
Expected Life58 years minimum (at the rated input, 50% load, operating temperature +40°C, standard mounting direction)
EMC EMI EN61204-3 (Class B)
EMS EN61204-3 (industrial)
Safety Standards
UL508 (Listing), UL1310 Class 2 ANSI/ISA-12.12.01
CSA C22.2 No. 107.1, 213, 223
EN60950-1, EN50178
UL508 (Listing)
ANSI/ISA-12.12.01
CSA C22.2 No. 107.1, 213
EN60950-1, EN50178
Other Standard SEMI F47 (at 208V AC input only)
Degree of Protection IP20 (EN60529)
Dimensions (mm) 90H × 22.5W × 95D 95H × 36W × 108D 115H × 46W × 121D
Weight (approx.) 140g 150g 260g 470g
Terminal Screw M3.5
At normal temperature and humidity unless otherwise specied.
Note 1: DC input voltage is not subject to safety standards. When using on DC input, connect a fuse to the input terminal for DC input protection.
Note 2: Under stable state.
Note 3: PS5R-VB05 (5V DC/2.0A) is 10W (Up to 3.0A at Ta = 0 to 40°C. Not subject to safety standards above 2.0A.)
Note 4: See the output derating curves on page 3.
Note 5: Calculation of the expected life is based on the actual life of the aluminum electrolytic capacitor. The expected life depends on operating conditions.
