IDEAL 61-844 HeatSeeker Manual de usuario

#61-844

ND-7043-3 Page 1 of 22

Instruction Manual

Safety Warning:

The equipment described in this document uses a Class 2 laser. Under no account should anyone

look directly into the laser beam or the laser beam exit aperture, irreversible damage to the eye

may occur. The laser should not be operated when there are personnel in the imager’s field of

view

Caution –use of controls or adjustments or performance of procedures other than those specified

in this document may result in hazardous laser radiation exposure.

data contained in this product information is correct, IDEAL does not warrant its accuracy or accept liability for any reliance on it. IDEAL reserves the

right to change the specification of the products and descriptions in this publication without notice. Prior to ordering prod ucts please check with IDEAL

for current specification details. All brands and product names are acknowledged and may be trademarks or registered trademarks of their respective

holders.

#61-844

ND-7043-3 Page 2 of 22

Contents Page

1. Contents of the Case. ........................................................................................... 3

2. Main Features and Controls. .................................................................................. 4

3. Getting Started.................................................................................................... 5

4. Thermal and Visible Image Blending ....................................................................... 7

5. Menu Structure.................................................................................................... 9

5.1 Infrared Settings ..................................................................................... 10

5.2 Measurement Options .............................................................................. 11

5.3 Camera Settings ..................................................................................... 12

5.4 Audio Settings ........................................................................................ 13

5.5 Image Browser ....................................................................................... 14

5.6 Date & Time Settings ............................................................................... 14

5.7 Language Selection................................................................................. 15

6. Adding Captions when Saving Images.................................................................. 16

6.1 Voice message ........................................................................................... 16

6.2 Text Captions................................................................................................ 17

APPENDIX ................................................................................................................ 18

A1. Emissivity Look up tables................................................................................ 18

A2. Full Icon list .................................................................................................. 19

A3. Technical Specification ................................................................................... 20

#61-844

ND-7043-3 Page 3 of 22

1. Contents of the Case.

1. Case.

2. Camera.

3. PSU and International adaptors.

4. CD –User manual and Software.

5. USB cable (camera to PC).

6. Handle.

7. Quick Start Guide

#61-844

ND-7043-3 Page 4 of 22

2. Main Features and Controls.

Laser Button

Capture

Button

Microphone

Speaker

Power

Button

Navigation Keys

Function

Key 4

Function

Key 3

Function

Key 2

Function

Key 1

Capture Button

Laser

Light

Visible Camera

Infrared Lens

#61-844

ND-7043-3 Page 5 of 22

3. Getting Started.

a) Switching the Camera on/off

b) Charging the internal battery

c) Focusing

Focus bar Out of focus Focused

The focus distance bar appears on the screen when the lens is turned slightly. It indicates the

approximate distance in meters or feet to the target.

Press the Power Button to

switch the camera on.

Press and hold for a few

seconds to switch the camera

off.

Gently rotate the lens clockwise and counter-

clockwise to focus the image.

Remember to remove the lens cap.

The camera’s built in battery is charged via

the charging port. A fully charged battery

will last approximately 6 hours. A green

LED indicates charging which turns red

when the battery is charged.

Note: When the camera is

connected to a PC via the USB

cable the camera will charge

but extremely slowly.

#61-844

ND-7043-3 Page 6 of 22

Function Key Buttons

Icons or text displayed on the screen above the Function Keys describe the actions. These

functions vary according to the options chosen by the user.

A yellow box around the icon for Function Key 1 or Function Key 2 indicates that this option

is selected and this defines the operation of the navigation and toggle buttons.

In normal imaging mode, Function Key 3 may be used to freeze the image; pressing it again

returns the camera to live operation. Function Key 4 is used to enter and exit the menu. See

appendix A2 for a full icon list.

d) Menu

Function Key 4 selects the Menu. Use the Navigation buttons to move around and use

Function Key 3 to select a menu function. Full details of menus are listed in section 5.

e) Saving an Image

To save a live or frozen image, press the Capture Button once. If Caption Mode or Voice

Annotation has been turned on, a text caption or voice annotation can be attached to the image

(see section 6)

Function Key 1 Function Key 2 Function Key 3 Function Key 4.

Capture Button

#61-844

ND-7043-3 Page 7 of 22

f) Temperature Measurement

Temperature readings are displayed at the top of the display. In the default mode, a single

temperature in F is of the center point of the cursor. The other readings at the top of the

display are Emissivity settings and reflected temperature setting. Two cursors or a

measurement area may alternatively be selected from the measurement options menu (see

section 5). A scale on the right hand side of the display indicates the temperature range within

the scene.

4. Thermal and Visible Image Blending

The camera can show a thermal image or a visible image of the scene, or a mixed blend of both,

or a Thermal image within the visible, also known as Picture in Picture(PiP).

a) 100% Thermal only.

b) 100% Visible only.

c) 50% Thermal and

50% Visible

Function Key 1 Function Key2 Function Key 3 Function Key 4.

Center navigation key

Up/Down, Left/Right

navigation keys

Temperature

range for the

scene

Temperature

difference

between cursors

One cursor

Two cursors

#61-844

ND-7043-3 Page 8 of 22

1. Press Function Key 2 until the camera on/off icon appears

2. If off press the center navigation key to toggle to camera on .

3. Use either the up/down, or left/right navigation keys to blend the visible

and thermal images. Blend options are 0%, 25%, 50%, 75%, 100% and PiP.

Image Alignment

As the visible and thermal camera lenses are not co-axial the visible and thermal image often

need to be aligned. This is usually required when moving to view objects at different distances.

1. Press Function Key 2 to toggle through to the camera on/off icon .

If off toggle the center navigation key to turn the camera option on .

2. Press Function Key 1 to toggle through to the alignment option .

3. Press center navigation key again to select the closes preset alignment

distances

4. Use the up/down and left/right navigation keys to fine-tune the alignment

of thermal and visible images.

5. The alignment facility is only available when the camera is on and in live mode

Note the visible image is moved during alignment, the Thermal

Image remains fixed.

Examples of alignment:

Fully Aligned Align left Align right

Align up Align down

*Four pre-programmed alignment distances are included. These are at 1.5 feet, 3

feet, 6 feet, and 12 feet. . With the alignment option selected by Function Key ,

pressing the toggle button multiple times cycles through the selection.

#61-844

ND-7043-3 Page 9 of 22

5. Menu Structure.

a) Select the menu by pressing Function Key 4 .

b) Navigate through the menu using the navigation keys and press Function Key 3

to select the required option. The highlighted item will have a yellow box around

it.

c) Use the up/down buttons to move in the selected list and select the required item.

d) Use the left/right keys to change values and options for the specific item.

e) Press Function Key 4 to exit or Function Key 1 to go back to the previous

menu.

Measurement

Options

Infrared

Settings

Image

Browser

Date & Time

Settings

Audio

Settings

Language

Selection

Camera

Settings

Function Key 1 Function Key2 Function Key 3 Function Key 4.

Center navigation key

Up/Down, Left/Right

navigation keys

#61-844

ND-7043-3 Page 10 of 22

5.1. Infrared Settings

See frequently asked questions for more details of each item.

Emissivity

Set emissivity value between 0.10 and 1.00 for measuring temperature.

Pressing Function Key 3 ( Table) gives a table of emissivity values of common

materials from which a selection can be made.

Palette

Display in image using different color palettes.

1. Ironbow 5. High Contrast

2. Rainbow 6. Rainbow 16

3. Isotherm Style 7. Black Hot

4. Hot Metal 8. White Hot

Reflected Temp

Usually set to the ambient temperature, or room temperature.

Applies only when emissivity of less than 1 is selected.

Temp units

Choose between C and F.

Integration

Chose an integration period from 1 (fast) to 9 (slow).

This determines the trade off between display speed and noise.

Interpolation

Choose Off or On.

This shows or hides the thermal image pixelation.

Tabla de contenidos

Otros manuales de Cámara térmica de IDEAL

IDEAL

IDEAL HeatSeeker 61-844EU Manual de usuario

Manuales populares de Cámara térmica de otras marcas

Hikmicro

Hikmicro B20 Manual de usuario

FLIR

FLIR E-EST Series Manual de usuario

FLIR

FLIR M-Series Manual de usuario

BST

BST BT-72 Manual de usuario

FLIR

FLIR G300 pt Series Manual de usuario

CBC

CBC EN7-S02T Manual de usuario

Satir

Satir YRH600 Manual de usuario

TESTO

TESTO 882 Manual de usuario

TECPEL

TECPEL TIG-320 Manual de usuario

SKF

SKF TKTI 21 Manual de usuario

TESTO

TESTO 885 Manual de usuario

InfiRay

InfiRay AT300 Series Manual de usuario

InfiRay

InfiRay AT Series Manual de usuario

FLIR

FLIR X6530sc Series Manual de usuario

Videotec

Videotec MAXIMUS MVXT Manual de usuario

Guide Sensmart

Guide Sensmart D384M Manual de usuario

NBN

NBN FLIR A6 Series Manual de usuario

WORKSWELL

WORKSWELL SAFETIS Manual de usuario