IDEAL OTDR Manual de usuario

Displaying Summary Pane Automatically

Keypad

To access main features:

1Press the Menu key.

2Use the arrows to select feature

and press Select.

To activate F1/F2 functions:

1Use the left/right function arrows

(beside F1/F2 keys) to make the

desired function or parameter visible.

2Press the F1 or F2 key located just

below.

To access and modify on-screen

parameters:

1Use the arrows to select an on-screen item

(drop-down list, keyboard, check box, etc.).

2Press Select.

To enter text or numbers with an

on-screen keyboard:

1Use the left/right function arrows (beside

F1/F2 keys) to move the cursor in the tex

2Use the up/down and left/right arrows to

select a character, and then press Select

to add it.

3Press OK (F1/F2 key) to accept the

element and hide the keyboard.

1Press the Menu key to

access main features.

2Select Setup > OTDR.3Select Show summary

after acquisitions.

Inspecting a Fiber with the FIP

To access Probe mode on your unit:

1Connect probe to the right side of the

unit, using an adapter if necessary.

2Press Menu, and then select Probe to

activate the probe display.

To adjust brightness or contrast:

1From Probe pane, select Display

Settings (F1/F2 key).

2Adjust brightness and contrast. When you

have finished, press OK (F1/F2 key).

To exit Probe mode and return to the

regular display:

Press Exit or press Menu and select another option.

This function is available with some models only.

Using the Menus and Keypad

To turn unit on/off.

To move around, select items, and

change parameters.

To access the main menu.

To access help about current

function.

To scroll through available

functions.

To activate the function

displayed directly above.

To start (or stop) an acquisition

in the selected OTDR mode.

To adjust brightness (four levels).

To cancel/exit current function.

IDEAL OTDR

Testing in Auto Mode

For information on how to use the keypad, see Using the Menus and Keypad at the back of this guide.

1Connect as shown.

2Press Pwr to

turn unit on.

Select test wavelengths.

Select Auto.

Select duration of

acquisition.

Press Auto Test to start the

acquisition.

You can stop the acquisition

at any time by pressing

Auto Test one more time.

During acquisition, the trace is displayed.

Once all selected wavelengths have been

tested, the unit switches to Summary pane

automatically (some models only).

If not, see Displaying Summary Pane

Automatically.

Clean launch fiber Device under test

Bulkhead adapter

3Select Menu > OTDR > Parameters.

If your unit supports

singlemode and

multimode

wavelengths, select

fiber type

(C fiber: 50 µm;

D fiber: 62.5 µm).

To reset the range and pulse for each

acquisition, select No.

To always use the same parameters, select

Yes .

Quick Reference Guide

P/N: 6510-00-0001 Version: 4.0.0

Testing in Manual

(

Advanced

)

Mode

Fib

l Ti

Viewing Results

There are many ways to view the results:

³Summary pane is displayed once the test is complete. You can also select Summary (F1/F2 keys).

Tested wavelengths

Pass/Fail status of

fiber under test

Length of

fiber under test

Information on detected

macrobends

³Trace pane. You can select Trace (F1/F2 keys). Zoom functions are available via Zoom (F1/F2 keys).

Events (use up/down

arrows to view them in turn)

Reflectance value

(appears in red when it exceeds

the defined threshold)

Distance between span start and markers A and B

Relative power at markers A and B (use left/right

arrows to move markers)

Distance between markers A and B

Loss difference between markers A and B

Wavelength of the displayed trace

³Events pane. You can select Events (F1/F2 keys). Values appearing in red exceed the defined thresholds.

Wavelength of the displayed trace

Configure other test parameters.

A longer pulse travels farther

down the fiber, but provides less

resolution.

Press Auto Test to start

the acquisition.

During acquisition, the trace is displayed.

You can view sudden changes in the fiber link. In this mode, the trace is refreshed instead of averaged.

When you have finished, press

Auto Test to stop the acquisition.

Select Real time.

You can select an item and

press Select to switch to

Trace pane.

4Select Manual.

7Configure other test parameters.

To set period over which results are averaged.

Generally, the longer the time, the cleaner the trace.

Default value is 30 seconds.

8Press Auto Test to start the acquisition.

You can stop the acquisition at any time by

pressing Auto Test one more time.

During acquisition, the trace is displayed.

Once all selected wavelengths have been

tested, the unit switches to Summary pane

automatically

(some models only).

If not, see Displaying Summary pane

Automatically.

A longer pulse travels farther down the fiber, but

provides less resolution.

1Connect as shown.

Press Pwr to turn unit on.

Clean launch fiber Device under test

Bulkhead adapter 1Connect as shown.

Press Pwr to turn unit

on.

Clean launch fiber Device under test

Bulkhead adapter

Loss value (appears in red when it exceeds

the defined threshold)

3Select Menu > OTDR > Parameters.

Select Menu > OTDR > Parameters.

Use left/right arrows to

switch between the different

wavelengths You can select an item and

press Select to switch to

Trace pane.

Select test

wavelength.

If your unit supports

singlemode and

multimode wavelengths,

select fiber type

(C fiber: 50 µm;

D fiber: 62.5 µm).

Select test wavelengths.

If your unit supports

singlemode and

multimode

wavelengths, select

fiber type

(C fiber: 50 µm;

D fiber: 62.5 µm).

Otros manuales de Equipo de prueba de IDEAL

IDEAL

IDEAL SecuriTest IP Manual de usuario

IDEAL

IDEAL Vol-Con 61-076 Manual de usuario

IDEAL

IDEAL Vol-Con 61-076 Manual de usuario

IDEAL

IDEAL 61-534 Manual de usuario

IDEAL

IDEAL Vol-Con 61-076 Manual de usuario

IDEAL

IDEAL Volt Sensor 61-063 Manual de usuario

IDEAL

IDEAL ABS Signal Thrower 62-184 Manual de usuario

IDEAL

IDEAL 61-521 Manual de usuario

IDEAL

IDEAL SecuriTEST Manual de usuario

IDEAL

IDEAL 61-085 Manual de usuario

IDEAL

IDEAL ABS Manual de usuario

IDEAL

IDEAL 61-796 Manual de usuario

IDEAL

IDEAL 61-954 Manual de usuario

IDEAL

IDEAL 61-830 Manual de usuario

IDEAL

IDEAL Vol-Con Elite Manual de usuario

IDEAL

IDEAL VoltAware 61-025 Manual de usuario

IDEAL

IDEAL VoltAware NCV Manual de usuario

IDEAL

IDEAL 61-795 Manual de usuario

IDEAL

IDEAL Super Series 4 Manual de usuario

IDEAL

IDEAL SecuriTEST PRO Guía de configuración

IDEAL

IDEAL 61-521 Manual de usuario

IDEAL

IDEAL LinkMaster PRO XL Manual de usuario

IDEAL

IDEAL 61-517 GFCI Manual de uso y cuidado

IDEAL

IDEAL VDV PRO 33-771 Manual de usuario

Manuales populares de Equipo de prueba de otras marcas

SMART

SMART KANAAD SBT XTREME 3G Series Manual de usuario

Agilent Technologies

Agilent Technologies BERT Serial Manual de usuario

Agilent Technologies

Agilent Technologies N3280A Manual de usuario

Vernier

Vernier Go Direct Voltage Manual de usuario

Lifeloc

Lifeloc R.A.D.A.R. Manual de usuario

Fluke

Fluke T5-600 Instrucciones de funcionamiento e instalación

Mercury

Mercury TSL01 Manual de usuario

MAHA

MAHA MBT Series Manual de usuario

Fuji Electric

Fuji Electric P-61 Manual de usuario

ETC

ETC SealerAtor Manual de usuario

Skyfine

Skyfine ETHYWAY V2 Manual de usuario

Appion

Appion G5 Twin Manual de usuario

PCB Piezotronics

PCB Piezotronics 8159-0112A Manual de usuario

BW Technologies

BW Technologies MicroDock II Manual de usuario

Sun Nuclear

Sun Nuclear 1027 Manual de usuario

Biomark

Biomark HPR LITE READER Manual de usuario

Hioki

Hioki 3169-20 Manual de usuario

Ashcroft

Ashcroft ATE-100 Manual de usuario