IDEAL Vogue Combi c26 Manual de usuario
When replacing any part on this appliance, use only spare parts that you can be assured conform to the safety and
performance specification that we require.
Do not use reconditioned or copy parts that have not been clearly authorised by Ideal.
TIMER, ELECTRONIC, 7 DAY - USER GUIDE
Vogue Combi c26, c32, c40
2
3
Vogue Combination boiler
Timer, Electronic, 7 Day
Contents Page
Timer ....................................................................... 3
Timed/On/Off ........................................................... 4
+ Hours.................................................................... 5
Time/Date ................................................................ 6
Time Program.......................................................... 7
Holiday Mode........................................................... 8
Display Backlight Intensity..................................... 9
Reset to Factory Settings .......................................11
The national regulations and respective safety instructions are to be observed.
Interferences and changes to the device will lead to cancellation of the warranty.
Summer/Winter Time (GMT/BST) - automatically updated
4
Timer, Electronic, 7 Day
Note: if the Low Battery symbol is visible or the display is blank then replace the batteries
2
4
1
8
1
2
6
0
Day of the week
Time
Program
Operating
Mode
Time
Hot Keys
5
Timed, Continuously On and Continuously Off operation
To set Central Heating to be Continuously On
press MODE until “CONT ON” is shown.
To set Central Heating to be Continuously Off
press MODE until “CONT OFF” is shown.
2
4
1
8
1
2
6
0
2
4
1
8
1
2
6
0
To set the Central Heating for Timed operation
press MODE until “TIMED ON” or “TIMED OFF” is shown.
2
4
1
8
1
2
6
0
2
4
1
8
1
2
6
0
6
+ Hours
To set + Hours press “+HOURS” and this screen will be shown.
If + Hours is used during an on period, the Central Heating on period will be extended by up to 5 hours.
Press “+” until the required setting is shown and then press OK
7
Time/Date
Summer/Winter time is automatically updated
At installation the “SET TIME/DATE” menu option activates automatically (starts at step 2)
1. Press MENU and this
screen will be displayed
2. Press NEXT until this
screen is displayed
3. Press OK and this
screen will be displayed.
Press “+” and “-” until the
correct HOURS is shown.
4. Press OK and this
screen will be displayed.
Press “+” and “-” until the
correct MINUTES is
shown.
5. Press OK and this
screen will be displayed.
Press “+” and “-” until the
current YEAR is shown.
6. Press OKand this
screen will be displayed.
Press “+” and “-” until the
current MONTH is shown.
7. Press OK and this
screen will be displayed.
Press “+” and “-” until the
current DAY is
shown.
8. Press OK and this
screen will be displayed.
When it disappears press
EXIT to return to normal
operation
8
Time Program
1Press MENU and this
screen will be displayed,
then press OK.
2 Press “+” and “-” until
the desired Hours figure is
shown and then press OK
Press “+” and “-” until the
desired Minutes figure is
shown and then press OK
3 Press “+” and “-” until
the desired Hours figure is
shown and then press OK
Press “+” and “-” until the
desired Minutes figure is
shown and then press OK
4Press “+” and “-” until
the desired Hours figure is
shown and then press OK
Press “+” and “-” until the
desired Minutes figure is
shown and then press OK
5 Press “+” and “-” until
the desired Hours figure is
shown and then press OK
Press “+” and “-” until the
desired Minutes figure is
shown. If you would like
to set a 3rd On period
continue programming in
the same manner,
otherwise press DAY.
6 Press YES to Copy
Monday’s On/Off times to
Tuesday, otherwise press
NO.
7 Program the remainder of the times in the same
manner before pressing EXIT to return to the
Menu and then EXIT again to return to normal
operation
9
Holiday Mode
1 Press MENU and this
screen will be shown.
2 Press NEXT until this
screen is shown.
3 This screen will be
shown briefly before
automatically moving to
the next screen
4 Press “+” and “-” until
the desired Holiday Year is
shown.
5. Press “OK” and this
screen will be shown.
Press “+” and “-” until the
desired Holiday Month is
shown.
6. Press “OK” and this
screen will be shown.
Press “+” and “-” until the
desired Holiday Day is
shown.
7. Press “OK” and this
screen will be shown.
Press “+” and “-” until the
required Holiday Duration
is shown.
8 Press “OK” and this
screen will be briefly
shown before moving to
the Menu, press EXIT to
return to normal operation
10
To change the LCD backlight intensity proceed as follows.
Display Backlight Intensity
1 Press MENU and this screen
will be shown.
2 Press NEXT until this screen is
shown.
3 Press OK and this screen will be
shown, then press “+” or “-” until
the required setting is shown.
Press OK to return to the Menu
and then EXIT to return to normal
operation.
Otros manuales para Vogue Combi c26
4
Este manual sirve para los siguientes modelos
2
Tabla de contenidos
Otros manuales de Caldera de IDEAL
IDEAL
IDEAL Vanguard L 170 Manual de usuario
IDEAL
IDEAL he15 Manual de usuario
IDEAL
IDEAL Classic LX RS 230 Nota de publicación
IDEAL
IDEAL imax plus F80 Manual de usuario
IDEAL
IDEAL Independent + Combi C24 Manual de usuario
IDEAL
IDEAL Elise H15 Manual de usuario
IDEAL
IDEAL SUPER PLUS 200/S Manual de usuario
IDEAL
IDEAL he15 Manual de usuario
IDEAL
IDEAL Evomax 30 Manual de usuario
IDEAL
IDEAL he30 Manual de usuario
IDEAL
IDEAL Mexico Slimline CF3/40 Hoja de datos
IDEAL
IDEAL Classic M3050 Manual de usuario
IDEAL
IDEAL HE 260 Manual de usuario
IDEAL
IDEAL MINI HE C24 Manual de usuario
IDEAL
IDEAL MINI C24 Manual de usuario
IDEAL
IDEAL imax W45 Hoja de datos
IDEAL
IDEAL ES24 Manual de usuario
IDEAL
IDEAL EXALT Combi 155 Manual de usuario
IDEAL
IDEAL MINI C28 Manual de usuario
IDEAL
IDEAL Mexico Super CF 3/60P Manual de usuario
