IDA TRX-200 Manual de usuario
1
I.D.A.I.D.A.
I.D.A.I.D.A.
I.D.A.
TRX-200 WTRX-200 W
TRX-200 WTRX-200 W
TRX-200 Wide Band Receiveride Band Receiver
ide Band Receiveride Band Receiver
ide Band Receiver
Operation manualOperation manual
Operation manualOperation manual
Operation manual
I.D.A.Inc.Tokyo,JapanI.D.A.Inc.Tokyo,Japan
I.D.A.Inc.Tokyo,JapanI.D.A.Inc.Tokyo,Japan
I.D.A.Inc.Tokyo,Japan
2
I.D.A.I.D.A.
I.D.A.I.D.A.
I.D.A.
INDEX
TURNONTRX‑200 .................................................. 4
FRONTPANEL ...................................................... 6
SIDEVIEWOFTRX‑200 ............................................. 7
TOPPANEL ........................................................ 8
BACKPANEL ....................................................... 9
OPERATIONS ...................................................... 10
ADJUSTMENTOFSQUELCHLEVEL .....................................11
MONITORINGFUNCTION ............................................. 11
CONFIGURATION ................................................... 13
MANUALFREQUENCYTUNING .......................................31
MEMORYSCANNING ................................................33
SEARCHFUNCTION ................................................. 35
SEARCHPAIRPROGRAM .............................................36
SPECIFICATIONS .................................................. 38
3
I.D.A.I.D.A.
I.D.A.I.D.A.
I.D.A.
Thank you for purchasing the TRX-200 all modes wide band monitoring
receiver.
Please read this operating manual carefully to avoid miss operation of the
receiver. The TRX-200 is carefully designed but like all receivers the radio
can suffer from a degree of self-oscillation known as ‘birdies’. These are
from the nature of super heterodyne circuit and do not represent a fault.
NOTE: Where the text is described in [SQUARE BRACKETS][SQUARE BRACKETS]
[SQUARE BRACKETS][SQUARE BRACKETS]
[SQUARE BRACKETS] the keys
are to be pressed exactly as shown.
For example: [8] [0] [0] [ENT][8] [0] [0] [ENT]
[8] [0] [0] [ENT][8] [0] [0] [ENT]
[8] [0] [0] [ENT]
This means press the numeric key 8, followed by the 0, key followed by the
0 key, followed by the [ENT][ENT]
[ENT][ENT]
[ENT] key.
The arrow keys to the lower left of the keypad are referred to as [UP][UP]
[UP][UP]
[UP]
[DOWN][DOWN]
[DOWN][DOWN]
[DOWN] keys.
The function key [FUNC][FUNC]
[FUNC][FUNC]
[FUNC] provides access to additional facilities via the
numeric keypads. This key should be momentarily pressed only before an-
other numeric key is pressed. Do not hold the key in while pressing other
keys.
4
I.D.A.I.D.A.
I.D.A.I.D.A.
I.D.A.
TURN ON TRX-200TURN ON TRX-200
TURN ON TRX-200TURN ON TRX-200
TURN ON TRX-200
To turn on TRX-200, press and hold the [PWR][PWR]
[PWR][PWR]
[PWR] key for more than 2.0 sec-
ond and you see starting message which can be edited to the way you like.
Similarly to turn the radio off, press and hold the power key for more than
2 second.
Power requirement: TRX-200 can be operated from either three AA
size Ni-Cad. batteries, three AA size dry cell bat-
teries or external DC supply of 9 to 14V DC, 300mA
minimum.
Always use the supplied charger or regulated DC
power supply of 9 to 14VDC, 300mA or by using the provided DC connect-
ing lead. The DC input socket is 1.3mm centre positive.
CAUTION: Do not attempt to connect the TRX-200 directly to the mainCAUTION: Do not attempt to connect the TRX-200 directly to the main
CAUTION: Do not attempt to connect the TRX-200 directly to the mainCAUTION: Do not attempt to connect the TRX-200 directly to the main
CAUTION: Do not attempt to connect the TRX-200 directly to the main
supplysupply
supplysupply
supply..
..
.
5
I.D.A.I.D.A.
I.D.A.I.D.A.
I.D.A.
Very carefully note the polarity of the battery cells. Also never attempt to
charge the receiver or connect to an external power source when dry bat-
teries are installed.Always remove dry batteries when they have run down.
Do not leave batteries in the battery compartment when the TRX-200 is
not being used for a long period of time, remove the batteries to avoid
leakage.
All memory channel data is stored into internal EEPROM which does not
require batteries or connection to external supply for backup. However
always turn off the TRX-200 whenever radio is not in use. Particularly
turn it off while charging.
HOW TO PUT BAHOW TO PUT BA
HOW TO PUT BAHOW TO PUT BA
HOW TO PUT BATTERIES INTO THE BATTERIES INTO THE BA
TTERIES INTO THE BATTERIES INTO THE BA
TTERIES INTO THE BATTERTTER
TTERTTER
TTERY COMPY COMP
Y COMPY COMP
Y COMPARTMENTARTMENT
ARTMENTARTMENT
ARTMENT
1. While pressing the round shaped point as illustrated slide the cover
downward to open the compartment.
2. Put AA size batteries (3pcs) into the
compartment according to the [+] and
[-] markings engraved inside each bat-
tery cradle.
3. Slide the cover back until it closes firmly with “click”.
6
I.D.A.I.D.A.
I.D.A.I.D.A.
I.D.A.
CONTROLS, CONNECTORSCONTROLS, CONNECTORS
CONTROLS, CONNECTORSCONTROLS, CONNECTORS
CONTROLS, CONNECTORS AND FUNCTIONSAND FUNCTIONS
AND FUNCTIONSAND FUNCTIONS
AND FUNCTIONS
FRONT PFRONT P
FRONT PFRONT P
FRONT PANELANEL
ANELANEL
ANEL
Strap hanger:Strap hanger:
Strap hanger:Strap hanger:
Strap hanger: Put the hand strap
through this hanger.
Keyboards:Keyboards:
Keyboards:Keyboards:
Keyboards: Enter frequencies or
initiate various functions through
the keyboards.
Power ON/OFF switch:Power ON/OFF switch:
Power ON/OFF switch:Power ON/OFF switch:
Power ON/OFF switch: Press
the key for more than 1 second
to turn the radio on or off.
The radio resumes the last
status when turned on.
SpeakerSpeaker
SpeakerSpeaker
Speaker
7
I.D.A.I.D.A.
I.D.A.I.D.A.
I.D.A.
SIDE VIEW OF TRX-200SIDE VIEW OF TRX-200
SIDE VIEW OF TRX-200SIDE VIEW OF TRX-200
SIDE VIEW OF TRX-200
Function [FUNC] key:Function [FUNC] key:
Function [FUNC] key:Function [FUNC] key:
Function [FUNC] key: To initiate second function of
various keys. When this key is pressed, TRX-200 goes into
function mode and [FF
FF
F] is displayed on LCD and you are ready
to press a 2nd function key while this [FF
FF
F] is displayed.
Squelch monitor [SQLSquelch monitor [SQL
Squelch monitor [SQLSquelch monitor [SQL
Squelch monitor [SQL MONI] key:MONI] key:
MONI] key:MONI] key:
MONI] key: To initiate monitor func-
tion (receive a signal regardless of squelch level) press a sec-
ond time to turn the function off. To adjust squelch level,
press [FUNC][FUNC]
[FUNC][FUNC]
[FUNC] key and then press [SQL MONI][SQL MONI]
[SQL MONI][SQL MONI]
[SQL MONI] key while
[FF
FF
F] is displayed on the LCD.
DC 12V socket:DC 12V socket:
DC 12V socket:DC 12V socket:
DC 12V socket: This is the socket for external DC power
supply or to charge Ni-Cad. batteries when these are fitted
inside of the battery compartment
8
I.D.A.I.D.A.
I.D.A.I.D.A.
I.D.A.
TOPTOP
TOPTOP
TOP PP
PP
PANELANEL
ANELANEL
ANEL
Antenna Connector:Antenna Connector:
Antenna Connector:Antenna Connector:
Antenna Connector: This is a high quality BNC 50 ohm unbalanced input.
The supplied telescopic antenna should be connected to this input.
VV
VV
Volume control:olume control:
olume control:olume control:
olume control: When rotated fully
clockwise the volume is at its maximum
and minimum level at fully counter-
clockwise
Dial - tuning control/selector:Dial - tuning control/selector:
Dial - tuning control/selector:Dial - tuning control/selector:
Dial - tuning control/selector: This dial changes the receive frequency
up and down in the selected frequency increment and also operates as
a “selector” when entering certain data through the LCD menus. Being a
mechanical data device, it is not uncommon for operations to be
occasionally missed and this does not represent a fault.
Earphone socket/RS232C serial port:Earphone socket/RS232C serial port:
Earphone socket/RS232C serial port:Earphone socket/RS232C serial port:
Earphone socket/RS232C serial port: This 3.5mm stereo socket permits
connection to an external earphone, headset or speaker of 8 ohm
impedance or greater. When the earphone socket is used, the internal
speaker will automatically be muted. This can also be used as RS232C
serial data port, making the TRX-200 capable of being connected to the
RS232C serial port of a personal computer.
The wiring diagram of cable and PC control software are available from
our home page.
9
I.D.A.I.D.A.
I.D.A.I.D.A.
I.D.A.
BACK PBACK P
BACK PBACK P
BACK PANELANEL
ANELANEL
ANEL
Reset Switch:Reset Switch:
Reset Switch:Reset Switch:
Reset Switch: To restore the TRX-200
to initial factory set status, press the
switch using a needle or similar pointed
object as illustrated
Battery compartment:Battery compartment:
Battery compartment:Battery compartment:
Battery compartment: This is for theAAsize
batteries (3), slide the cover downward to
open the compartment
10
I.D.A.I.D.A.
I.D.A.I.D.A.
I.D.A.
OPERAOPERA
OPERAOPERA
OPERATIONSTIONS
TIONSTIONS
TIONS
TURNING ON THE TRX-200:TURNING ON THE TRX-200:
TURNING ON THE TRX-200:TURNING ON THE TRX-200:
TURNING ON THE TRX-200: Keep
pressing the [PWR][PWR]
[PWR][PWR]
[PWR] key for more than 2
second. The LCD displays opening message
when you turn the radio on.
ADJUSTMENT OFADJUSTMENT OF
ADJUSTMENT OFADJUSTMENT OF
ADJUSTMENT OF AUDIO VOLUMEAUDIO VOLUME
AUDIO VOLUMEAUDIO VOLUME
AUDIO VOLUME
When you are receiving a signal, rotate the
volume control in a clockwise direction to
increase the audio volume and rotate
counter clockwise to decrease it.
With no signal.
Press [SQL MONI][SQL MONI]
[SQL MONI][SQL MONI]
[SQL MONI] key to monitor noise, when no signal is received,
to adjust audio volume to appropriate level.
Tabla de contenidos
