ID View AHD Series Manual de usuario

AHD Series HD iDVR Fast User Manual

Directory:

Part One: Basic

Operation....................................................... ............................................ ..........................................2

1. Basic

Installation................................................

..................

.................................................... ............................2

1.1 HDD

Installation.............................................

..................

................................... .............................................2

1.2 Mouse

Connection........................................................

..................

............................. .....................................2

Startup......................................................................................................................... ...........................................2

3. Turn

off............................................................................................................

.............

..........................................2

Login.....................................................................................................................

... .

.............................................2

Preview...................................................................................................................... ............... ..............................3

6. Recording Configuration

............................................................................................ .........................................3

7. Snapshot Storage(partial model support)

.....................................................................................................4

Playback................................................................................. ..................................................... ...........................5

Network.................................................................................................................. ...............................................6

10.Alarm.....................................................................................................................

.... .. ...........

............................7

10.1 Motion

..................................................................................................................

.. ...........

…......................7

10.2 Video

Analysis............................................................................................

........................... .. ............

........7

11. PTZ Control

................................................................................................................ .....................................11

12. Access device in public network (Cloud operation)

...................................................................................11

12.1

Guide.............................................................................................................. .... ...........................................11

12.2 Login by user

.......................................................................................................... .......................................11

12.3 Login by

device.................................................................................................................. ...........................15

Part two: Remote

Monitor.....................................................................................................

..............

..........................16

1. Remote

Monitor............................................................................................................ ..........................................17

1.1

CMS.................................................................................................................................................... .......... .....17

1.2

WEB......................................................................................................................

................................

.............17

2. Basic Remote Monitor Operation

..................................................................................... ................................18

2.1 Screen

Split.................................................................................................................. .......................................18

2.2

Playback.................................................................................................................

. ... .......................

................18

2.3

Log......................................................................................................................

. ....................... .....

.................18

2.4 Local

Config..........................................................................................................

.......................

........

....

........18

2.5 Channel

Control................................................................................................

.... ....................... ..............

.......18

2.6 Remote

Config.......................................................................................................... .

...................... ........

.........18

Part three: Special Function

.................................................................................................

.......................

.... .........18

1. Encode

Setting....................................................................................................

............ .......................

.................20

1.1 Encode of separated channel setting

......................................................................................................20

1.2 Extra

Stream..........................................................................................................................................................20

2. Multi-channel Playback Synchronous

......................................................................................................20

3. Multi-channel realtime transfer via network

......................................................................................................21

4. Mobile

Monitor..................................................................... ..............................................

.......

................... ..........23

5. File

Storage.............................................................................................................. .................................................23

6.AHD series special

function................................................................................................

...................

..................23

6.1 SPOT output(only partial model

support)..............................................................................................................23

6.2 SDI input(only partial model

support)....................................................................................

...........................

...23

6.3 Channel type

select................................................................................................................... .............................23

6.4 Standard HDMI output

........................................................................................................................................25

Appendix 1.Remote Controller

Operation....................................................................................... .................................25

Appendix 2.Mouse

Operation................................................................................................................... ........................25

Warranty Card Error! Bookmark not defined.

.......................................................................... ...............................25

12000 Ford Road, Suite 110, Dallas, TX

75234

Tel: 972-247-1203 Fax:

972-247-1291

www.idview.com

12000 Ford Road, Suite 110, Dallas, TX

75234

Tel: 972-247-1203 Fax:

972-247-1291

www.idview.com

/ 25

Summary:

Thank you for purchasing our r e c o r d i n g te c h n o l o g y . This s er i e s of DVR integrates High Definition video,

Intelligent motion detection and a Tr i - b ri d de s i g n , to give you, our esteemed customers the best of breed protection.

The technical path of multiple networks, intelligent analysis, enterprise level CMS make the DVR feature rich, yet, ease of

use and expandable.

Main Features:

 DVR/HVR/NVR 3 in 1

 Cloud Technology

 IVS (Intelligent video analysis system)

 High definition and Tri-brid

 Intelligent and Automatic

 Cloud technology - 1 step internet connection

 informative and Mobile

Part One: Basic

Operation

1. Basic installation

1.1 HDD installation

Please install the Hard disk before the first use of this product.

Please connect power cable and data cable correctly, our product can support 1, 2, 4 or 8 HDD, the number of HDD

that can be support depends on which model was purchased.(Remark: the device can run normally without HDD, but

cannot record and playback without it )

1.2 Mouse connection

There is one or two USB port on the back panel（one of the back ports is the same as on the front panel and one USB at

front panel, both can be used for mouse, flash disk, WIFI or 3G module, etc.

2. Startup

Connect with power, turn on the switch located on the back panel, when the indicator is on, then the DVR is turned on.

After starting up, you will hear a beep; the default output mode is multi-window mode. Note: Restart the power after the

unit is powered down abnormally, the DVR will automatically recover the state before it was powered off.

3. Turn off

There are two methods to turn off the DVR; soft switch and hard switch.

Soft switch: Entering [Main menu] and choosing [Logout] in the [turn off the system] option is called soft switch.

Pressing the power supply switch is called hard switch.

Note: The setting information must be saved before replacing the battery otherwise information will be lost.

4. Login

When the DVR boots up, user must login and the system provides the corresponding functions with the user preview.

There are two user settings; admin (Default Password: 123456), and guest (No password). “Admin” is a super user

preview; “Guest” is the preferred user for preview and playback. You can modify the password for Admin and Guest,

but cannot modify the authorities of them

Pic 1 :

Password protection: If the password is continuously entered wrong three times, the alarm will sound. If the password is

continuously entered wrong five times, the account will be locked. (Through reboot or after half an

ur, the account will

be unlocked automatically).

5. Preview

12000 Ford Road, Suite 110, Dallas, TX

75234

Tel: 972-247-1203 Fax:

972-247-1291

www.idview.com

/ 25

The system date, time and channel title are shown in each viewing window. The surveillance video and the alarm status are

shown in each window.

6. Recording

Configuration

Chart 1 icon on preview window

Set the recording parameters in the surveillance channel. You can enter [Main Menu]> [Record Channel]> [Record Config]

to set. The system’s default setting is 24 hours continuous recording.

Note: There is at least one read-write hard disk if the DVR records normally.(refer to chapter 4.5.1 HARD DISK Manage)

Pic 2 Recording

Config

【Channel】Choose the corresponding channel number to set the channel. Choose the “all” option to set the entire channels.

【Redundancy】Choose the recording file and backup in two hard disks. The one is read-write disk, another is redundant

disk. (refer to 4.5.1 in reference CD)

【Length】Set the time length of each video file. 60minutes is default length.

【Pre-record】Record 1-30 seconds before the action. (File length is decided by the stream)

【Record Mode】Set video state: Schedule, manual and stop.

Schedule: Record according to the set video type (regular, detect and alarm) and time section.

Manual: Click the “all” button and make the corresponding channel recording no matter it is in any state.

Stop: Click the “stop” button and make the recording channel stop recording no matter it is in any state.

【Period】Set the time section of common recording, The recording will start only in the set range.

【Recording Type】Set recording type: regular, detect or alarm.

Regular：Perform the regular recording in the set time section. The video file type is “R”.

Detect：Trigger the “motion detect”, “video blind” or “video loss” signal. When above alarm is set as opening recording,

the “detection recording” state is on. The video file type is “M”.

Alarm：Trigger the external alarm signal in the set time section. When above alarm is set as opening recording, the

“detection recording” state is on. The video file type is “A”.

7. Snapshot storage (Partial model support)

Based on settings to save the monitor image

12000 Ford Road, Suite 110, Dallas, TX

75234

Tel: 972-247-1203 Fax:

972-247-1291

www.idview.com

/ 25

Parameter setting: 【Main menu】

【Record

Channel

】

【

Snapshot

】

do related setting, see pic 3, the function is closed

in default.

Note: If normal snapshot storage, please set Snap at 【Main

】

【

Advanced

】

【

HDD

Manage】->【Snapshot】

(please refer to chapter 4.5.1 HDD Manage)

Please refer to “6 record settings”.

Pic 3 Snapshot

8. Playback

There are two methods for you to play video files in the hard disk.

1. In the desktop shortcut menu.

2. Main Menu>Playback.

Enter the playback interface; you can playback video of multiple channels at the same time.

Note: The hard disk that saves the video files must be set as read-write or read-only state. (Refers to 4.5.1 HARD DISK

management)

Pic 4:

Playback

1. back up options 2.file info 3. file

searching

4. File backup 5.operation hint 6.play control

key

【File option】Choose the file to playback/backup.

12000 Ford Road, Suite 110, Dallas, TX

75234

Tel: 972-247-1203 Fax:

972-247-1291

www.idview.com

/ 25

【File information】Start time, end time and size.

Note: The storage must be large enough before the file backup.

【File searching】Search the file according to the searching parameter.

【File Backup】Backup files from HDD

【operation hint】Display the function of the cursor place.

【playback control】Refer to the following sheet for more information.

Chart 2: Playback control

key

Note：Frame by frame playback is only performed in the "pause" playback state.

Special functions:

Special function:

Accurate playback Input time (h/m/s) in the time column and then click playback.

Local zoom: When the system is in single-window full-screen playback mode, you can drag your mouse on the screen to

select a section and then left click to local zoom. You can right click to exit.

9. Network

Doing network setup through [Main Menu]>[Network]

【IP address】Set the IP address. Default: 192.168.1.10.

【Subnet Mask】Set the subnet mask code. Default: 255.255.255.0.

【Gateway】Set the default gateway. Default: 192.168.1.1.

Pic 5: Network

setting

Make the equipment’s IP address and the router in the same network segment. For example, the router IP

addre

ss is

192.168.1.1, and the subnet mask is 255.255.255.0. According to the default setup, generally the default gateway is the

router IP address, so enter IP address 192.168.1.10 in the IE browser to achieve visiting LAN equipment such as operating

image surveillance in the public network remote access equipment for monitoring. Detail setups refer to “Network setup

reference”.

12000 Ford Road, Suite 110, Dallas, TX

75234

Tel: 972-247-1203 Fax:

972-247-1291

www.idview.com

/ 25

10. Alarm

10.1 Motion Detect

Pic 6 Motion Detect

Motion Detection Setup: Set DVR equipment making it alarm, linkage record and make the PTZ turn to preset position

when there is a moving object in designated areas during Monday to Friday.

Step1. Choose【Main

】

【

Alarm

】

【

Motion

Detect】, then enter the setup interface;

Step2. Choose one channel and adjust sensitivity level, then set the time period of alarm surveillance. Set the monitor area

(click the “set” button, choose the areas you want, and the “default” means choose all areas, then right click to choose "up

window".

Step3. When at alarm state, the DVR can take linkage measures. Alarm output, recording, tour, PTZ activation, snapshot,

show message, sending email (need to set email parameters at net service)and buzzer (local buzzer).

Step4. Set other channels alarm parameter following step 2 and step 3.

Note: Video blind, video loss and alarm input’s setup method are similar with motion detection.

10.2 Video Analysis

Pic 7 Video

analysis

【Video analysis function】: can set in two rules: picket line and picket area

Picket line rules: can be set to forbid bi-directional, from up to down (from left to right), from down to up(from right to

left), 2 forbidden directions, when the moving objects meet the picket line rules, alarm will occurred. (Note, when it is set

over pitched，it will show the direction from left to right / from right to left, otherwise will show that of from up to down /

12000 Ford Road, Suite 110, Dallas, TX

75234

Tel: 972-247-1203 Fax:

972-247-1291

www.idview.com

/ 25

from down to up

Rules: can be set to forbid bi-directional, enter, leave, 3 directions, when the moving objects meet the picket area rules,

alarm will be activated

Step 1: [Main Menu]> [Alarm]> [Intelligent Video analysis], enter video analysis setting interface, enable this function.

Step 2: click rule to enter the rule setting interface, see pic 8:

Pic 8 Rule

setting

Step 3: enable show track function, adjust level of sensibility and minimum image distance. Set picket mode, choose picket

line or picket area, click setting to enter the “Config” interface, right click the mouse and choose add, use mouse to set two

or more points then connect to form a line or a irregular area, after that will come out an option box of forbidden direction,

choose one of them and right click mouse, then click yes return to pre-interface, click yes to finally finish alarm rules

setting.

Step 4: setting steps of alarm control period and the taken linkage measures is the same as step 2 and step 3 in alarm setting

10.1

Step 5: when video analyze alarm happens, there will be red box line in the preview image.

The intelligent analyze function mainly including below 4 facets:

1. Perimeter detection（PEA）

(1). touch line detection: bi-directional touch line, single-direction touch line

(2). Area detection: enter alarm, leave alarm

12000 Ford Road, Suite 110, Dallas, TX

75234

Tel: 972-247-1203 Fax:

972-247-1291

www.idview.com

/ 25

2. Items Care（OSC）

Detect the change of goods status will trigger the alarm. The change can be goods left in the scene, or the goods are

mov

or lost. Main function: items left or stolen or moved.

(1). Detect that something was dropped from the motor bike.

(2). The car stopped in the forbidden parking area on the street.

12000 Ford Road, Suite 110, Dallas, TX

75234

Tel: 972-247-1203 Fax:

972-247-1291

www.idview.com

/ 25

3. Flowmeter count (CPC)

The head count of people passing in and out of a room, which is fit for flow statistic in simple indoor narrow passages.

4. Abnormal video signal diagnosis (AVD)

Auto-detect that there is mess of skid bars, ripple, or a burst of flying spot, thorn or thread type of interference in the video

image that lead to image fuzz, twisted, snow, flicker, scrolling, etc.

12000 Ford Road, Suite 110, Dallas, TX

75234

Tel: 972-247-1203 Fax:

972-247-1291

www.idview.com

/ 25

11. PTZ Control

To do simple PTZ control via below steps:

Step 1: 【Main

】

【

System

】

【

PTZ

】

to set parameter of channel, protocol, etc.

Step 2: under preview status to enter single window of PTZ control；

Step 3: single click right button, choose PTZ control to control the normal function, or choose high-speed, click left button

can operate PTZ directly, the moving of mouse is to control the direction of PTZ, use the rolling can to zoom in or zoom

out of the camera.

12. Access device in public network (Cloud operation)

12.1

Guide

If this is your first time using this, please start here (or follow the introduction in chapter 12.3 to login), if not, please skip

(1)Login cloud service website: http://xmeye.net

Tabla de contenidos

Otros manuales de DVR de ID View

ID View

ID View IV-1600TX-SN Manual de usuario

ID View

ID View IV-100CD Instrucciones de instalación

ID View

ID View IV-400CD-SN Manual de usuario

ID View

ID View IV-110CD-SN Manual de usuario

ID View

ID View PIV Series Manual de usuario

ID View

ID View IV-LP16D1 Manual de usuario

ID View

ID View IV-110TX-SN Manual de usuario

ID View

ID View IV-400TX-SN Manual de usuario

ID View

ID View IV-480MORT Manual de usuario

Manuales populares de DVR de otras marcas

FLIR

FLIR M3100E Series Manual de usuario

VTRACKPRO

VTRACKPRO FPRO300 Manual de usuario

Swann

Swann NVR-7085 models Manual de usuario

XtendLan

XtendLan DVR-1670C Manual de usuario

urmet domus

urmet domus 1093/004AHD Manual de usuario

Holux

Holux M1 Manual de usuario

CMOS DOTCOM

CMOS DOTCOM ANX-1670 Manual de usuario

Whistler

Whistler D16VRS Manual de usuario

Defender Security

Defender Security 82-20235 Manual de usuario

MISUMI

MISUMI MP-WF100M Manual de usuario

Speco

Speco D8HU Manual de usuario

UST

UST DDR-E04AA Instrucciones de uso

Consolidated

Consolidated Digital Video Recorder Manual de usuario

Mace

Mace DVR0404RW Guía de inicio rápido

RCA

RCA RTD315W Manual de usuario

FSM

FSM Colibri Grande PRO Manual de usuario

Hauppauge

Hauppauge HD PVR 2 Manual de usuario

Identivision

Identivision ICR-PH161i PIONEER Manual de usuario