ICP DAS USA ET-2255U Manual de usuario

Technical support: servic[email protected] P1

ET-2255U Quick Start

v1.2, Jun. 2018

What’s in the box?

Related Information

The package includes the following items:

ET-2255U Module x 1

Quick Start x1

(This Document)

ET-2200 Series Product Page:

Documentation & Firmware:

NS-205/MDR-20-24 Product Page (optional):

Technical support: servic[email protected] P2

Connecting the Power and Host PC

1) Make sure your PC has workable network settings.

Disable or well configure your Windows firewall andAnti-Virus firewall first,

else the “Search Servers” on Chapter 5 may not work. (Please contact

with your system Administrator)

2) Connect both the ET-2255U and your PC to the same sub network or the

same Ethernet switch.

3) Supply power (+10~+30 VDC) to the ET-2255U.

4) Verify that the “PWR”LED indicator

on the ET-2255U is flashing.

Red, OK

Technical support: servic[email protected] P3

2 Pin Assignments & Wiring Note

Pin Assignments:

Wire Connections:

Readback as 1 Readback as 0

+5 ~ +50 VDC OPEN or <1 VDC

Digital Input/

Counter

Sink

Source

To other channels

7.5K

DI.COM

DIx

To other channels

7.5K

DI.COM

DIx

To other channels

7.5K

DI.COM

DIx

To other channels

7.5K

DI.COM

DIx

Open

Close to GND

Dry

Contact

Readback as 1

ON State

Digital

Output

Sink

Source

DOx

DO.COM

Load DOx

DO.COM

Load

DOx

DO.COM

- +

Load DOx

DO.COM

- +

Load

Readback as 0

OFF State

GND

DIx

+S5 V GND

DIx

+S5 V

Technical support: servic[email protected] P4

3 Wiring the DI and DO for Self-test

A tip for connecting the wire to the connector

A tip for removing the wire from the connector

1) Connect the DI0 pin (Pin17) to the DO0 pin (Pin18).

2) Connect the External Power +24V to the DI.COM pin (Pin01).

3) Connect the External Power GND to the DO.COM (Pin02).

Technical support: servic[email protected] P5

4 Modbus Address

(0xxxx) DO address:

Begin

address

Points

Description

Bits

Per

Point

Range

Access

Type

0 (0x0)

1~6

Digital Output Channels

0: OFF, 1: ON

R/W

32 (0x20)

Clears the status of all high

latched DI channels

1: Clear

33 (0x21)

Clears the status of all low

latched DI channels

1: Clear

190

(0xBE)

1~6

Enables frequency

measurement for all DI

Channels

0: Disable

1: Enable

(Default: 0)

R/W/F

235

(0xEB)

1~6

Sets the Power-on value for

all DO Channels

0: OFF, 1: ON

(Default: 0)

R/W/F

267

(0x10B)

1~6

Sets the Safe value for all DO

Channels

0: OFF, 1: ON

(Default: 0)

R/W/F

“R”: Read; “W”: Write; “F”:Settings are recorded in flash memory by default

(1xxxx) DI address:

Begin

address

Points

Description

Bits

Per

Point

Range

Access

Type

(0x0)

1~6

Digital Input

0:Off

1:On

(0x20)

1~6

Digital latched status (high)

0:no

1:latched

(0x40)

1~6

Digital latched status (low)

0:no

1:latched

“R”: Read

Note

For detail “DI/DO Modbus Address”information, refer to Section 6.3 Modbus Register Table

of user’s manual

(http://ftp.icpdas.com/pub/cd/6000cd/napdos/et2200/document/).

Technical support: servic[email protected] P6

5 Configuring Network Settings

1) Run the eSearch Utility.

The eSearch Utility is located at:

http://ftp.icpdas.com/pub/cd/6000cd/napdos/software/esearch/

2) Click the “Search Servers”to search your ET-2255U.

3) Double-click your ET-2255U to configure the settings

Factory Default Settings of ET-2255U:

IP Address

192.168.255.1

Subnet Mask

255.255.0.0

Gateway

192.168.0.1

4) Contact your Network Administrator to obtain a correct network

configuration (such as IP/Mask/Gateway). Enter the network settings

and click “OK”.

Note: The ET-2255U will use the new settings 2

seconds later.









Technical support: servic[email protected] P7

6 Testing your Ethernet I/O Module

1) Wait 2 seconds and click “Search Servers”button again to ensure the

ET-2255U is working well with new configuration.

2) Click the name of ET-2255U to select it.

3) Click the “Web”button to log in to the web configuration pages.

(Or enter the URL address of the ET-2255U in the address bar of the

browser.)

4) Enter the password (default: Admin)in the “login password”field and

click “Submit”.







Use the default

password: Admin



Technical support: servic[email protected] P8

5) In the “Home”page allows a simple test to be performed to verify the Digital

Input and Output functionality.

6) In the “Digital I/O”section, click the “DO0”button to ON (Red).

7) The corresponding DI becomes green for DI0 is ON.







Tabla de contenidos

Otros manuales de Sistema de E/S de ICP DAS USA

ICP DAS USA

ICP DAS USA A-626 Manual de usuario

ICP DAS USA

ICP DAS USA ISO-AD32H Manual de usuario

ICP DAS USA

ICP DAS USA I-7000 Series Manual de usuario

ICP DAS USA

ICP DAS USA UA-2241M Manual de usuario

ICP DAS USA

ICP DAS USA SG-3081 Manual de usuario

ICP DAS USA

ICP DAS USA M-7011D Manual de usuario

ICP DAS USA

ICP DAS USA ET-2200 Series Manual de usuario

ICP DAS USA

ICP DAS USA EIP-2000 Series Manual de usuario

ICP DAS USA

ICP DAS USA EIP-2019 Manual de usuario

ICP DAS USA

ICP DAS USA I-7018 CR Manual de usuario

ICP DAS USA

ICP DAS USA G-451 Series Manual de usuario

ICP DAS USA

ICP DAS USA I-7061D Manual de usuario

ICP DAS USA

ICP DAS USA I-2533CS Series Manual de usuario

ICP DAS USA

ICP DAS USA PROFI-8455 Guía de configuración

ICP DAS USA

ICP DAS USA EC2-P32 Manual de usuario

ICP DAS USA

ICP DAS USA SG-3071 Manual de usuario

ICP DAS USA

ICP DAS USA ET-7000 series Manual de usuario

ICP DAS USA

ICP DAS USA PISO-P64 Series Manual de usuario

ICP DAS USA

ICP DAS USA PISO-813 Manual de usuario

ICP DAS USA

ICP DAS USA CAN-2088D Manual de usuario

ICP DAS USA

ICP DAS USA U-7500 Series Manual de usuario

ICP DAS USA

ICP DAS USA DB-16R Manual de usuario

ICP DAS USA

ICP DAS USA I-9K Series Manual de usuario

ICP DAS USA

ICP DAS USA PET-7000 Series Manual de usuario

Manuales populares de Sistema de E/S de otras marcas

WAGO

WAGO 750-344 Manual de usuario

Teknim

Teknim TWM-1887 Manual de instrucciones

Intelligent Appliance

Intelligent Appliance IA-2662-E Manual de usuario

BERGHOF

BERGHOF ECC DIO 16/16 Manual de instrucciones

Advantech

Advantech PCM-27J3AU Manual de instalación y operación

Festo

Festo CP-E08-M12-CL Manual de usuario

Measurement Computing

Measurement Computing PCI-DAS64/M1/16 Manual de usuario

Hitachi

Hitachi HX-RIO3 Series Manual de usuario

NUUO

NUUO SCB-A08 Manual de usuario

M-system

M-system R3Y-RS8 Manual de usuario

jablotron

jablotron JB-110N Manual de usuario

Omron

Omron SYSMAC C200H Manual de usuario

DOLD

DOLD SAFEMASTER M Manual de usuario

ABB

ABB OPT-MF-001 Manual de usuario

Omron

Omron SYSMAC C2000H Manual de usuario

Helmholz

Helmholz TB20 Manual de usuario

Automationdirect.com

Automationdirect.com DL305 Manual de usuario

WAGO

WAGO I/O-SYSTEM 750 Manual de usuario