ICP DAS USA A-826 Series Manual de usuario

- 1 -

Language

English

Version V1.0

Update Oct.2008

………………………………………………

What’s on your package?

 One A-826 series card

 One companion ISA CD V2.1 or later)

 One Quick Start Guide This document)

………………………………………………

Installing Windows Driver

Follow those steps:

1. Setup the Windows driver.

You can get the driver from:

CD:\NAPDOS\ISA\A826\DLL\

http://ftp.icpdas.com/pub/cd/iocard/isa/napdos/isa/a826/dll/

Windows driver only support windows 98/NT/2000 and

XP/2003/vista 32-bit versions.

- 2 -

2. Click button to start installation.

3. Click button to install driver into the default folder.

4. Click button to continue installation.

5. Select “NO, I will restart my computer later” and then

click button.

………………………………………………

I/O Base Address & Interrupt Setting



The base address is set from SW1 DIP switch on

board:



The Interrupt Level

Setting

1 2

A9 A8 A7 A6 A5 A4`

BASE ADDR A9 A8 A7 A A5 A4

200-20F OFF

210-21F OFF

OFF

220-22F(



) OFF

OFF

230-23F OFF

OFF

240-24F OFF

OFF

250-25F OFF

OFF

260-26F OFF

OFF

270-27F OFF

OFF

280-28F OFF

OFF

: : : : : : :

2F0-2EF OFF

OFF

300-30F OFF

OFF

310-31F OFF

OFF

: : : : : : :

3F0-3FF OFF

OFF

(



) : default base address is 0x220

SW1 : BASE ADDRESS

IRQ 3 4 5 6 7 9 10 11 12 14 15 NC

Interru t 15

(default)

- 3 -

………………………………………………

Installing Hardware on PC

Follow those steps:

1. Shut down and power off your computer

2. Remove all covers from the computer

3. Select an empty ISA slot

4. Carefully insert your I/O card into the ISA slot

5. Replace the PC covers

6. Power on the computer

After powering-on the computer, continue next process.

………………………………………………

Adding Hardware

7. Add Hardware

7-1

Open the “Control Panel” by click the item “Start / Settings /

Control Panel”.

7-2 Double-click the item “Add/Remove Hardware” and Click

the “Next >” button.

7-3 Select the item “Add/Troubleshoot a device” and click the

“

““

“Next >” button.

7-4 Select the item “Add a new device” and click the “Next >”

button.

Adding hardware is used on Windows 2000/XP/2003/Vista

32 only. Windows 9X/Me/NT users can skip it.

- 4 -

7-5 Select the item “No, I want to select the hardware from a

list” and click the “Next >” button.

7-6 Select the item “Other device” and click the “Next >” button.

7-7 Click the “Have Disk…” button.

7-8 Click the “Browse…” button to select the Inf file default path

is D:\DAQPro\A826_WIN2K\Inf and click the “OK” button.

7-9 Select the correct device from the “Models:” listbox and Click

the “Next >” button.

7-10

The windows show to dialog box and Click the “OK” button to

enter the device’s properties settings.

8. Modify the device properties

9. Reboot the PC

The detail “add hardware” information.

Please refer to

CD:\NAPDOS\ISA\Manual\PCI_ISA_PnP_Driver_Installation_in_Win9x_2K_XP.pdf

No devices are conflicting

Select Input/Output Range

Select Interrupt Request

Click “Change Setting” to

change I/O Range Depend on

I/O Base Address)

Click “Change Setting” to change

Interrupt Request. Depend on

Interrupt Level setting)

- 5 -

………………………………………………

Pin Assignments

 CN1,CN2 : Digital Input/Output Connector.

 CN3 : Analog input/Analog output/Timer/Counter

Connector.

The detail pin assignments information. Please refer to :

CD:\NAPDOS\ISA/A82 /Manual/82 .pdf

http://ftp.icpdas.com/pub/cd/iocard/isa/napdos/isa/a826/manual/826.pdf

CN1

CN2

- 6 -

………………………………………………

Self-Test

1. Use CA-2002 Optional) to connect the CN1 with

CN2.

2. Run the A-821 sample program.

Get the file from Default):

C:\DAQPro\A821_WINxxx\DEMO

CN1

CN2

CN3

- 7 -

3. Check number of the A-826, and test DIO function.

4. Get DIO function test result.

The o

826

had successfully

installed to

Select the board

number for the A-826.

It starts from 0.

Click this

button to do

DIO test.

Click the channel

0 、2、4、6 in the DO.

DI show to channel 0

、

2、4、6 for high state. Red

light)

Complete

- 8 -

………………………………………………

Additional Information

 A-82 Series Card Product page:

http://www.icpdas.com/products/DAQ/pc_based/a-826pg.htm

 CA-2002(Optional) page:

http://www.icpdas.com/products/Accessories/cable/cable_selection.htm

 Documents:

CD:\NAPDOS\ISA\A826\manual

http://ftp.icpdas.com/pub/cd/iocard/isa/napdos/isa/a826/manual/

 Software:

CD:\NAPDOS\ISA\A826

http://www.icpdas.com/download/isa/a826/index.htm

The ICP DAS Web Site

http://www.icpdas.com

[email protected]

 Technical support

 Supplies and ordering information

 Ways to enhance your device

 FAQ

 Application story

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Sistema de E/S de ICP DAS USA

ICP DAS USA

ICP DAS USA I-7019R Manual de usuario

ICP DAS USA

ICP DAS USA SG-3013 Manual de usuario

ICP DAS USA

ICP DAS USA SG-3071-G Manual de usuario

ICP DAS USA

ICP DAS USA CAN-2054C Manual de usuario

ICP DAS USA

ICP DAS USA I-3591 Manual de usuario

ICP DAS USA

ICP DAS USA UA-2241M Manual de usuario

ICP DAS USA

ICP DAS USA ECAT-2016 Series Manual de usuario

ICP DAS USA

ICP DAS USA SG-3071 Manual de usuario

ICP DAS USA

ICP DAS USA CAN-2088D Manual de usuario

ICP DAS USA

ICP DAS USA ISaGRAF VP-2117 Manual de usuario

ICP DAS USA

ICP DAS USA PIO-D64U Manual de usuario

ICP DAS USA

ICP DAS USA PIO-D144U Manual de usuario

ICP DAS USA

ICP DAS USA PIO-DA4 Manual de usuario

ICP DAS USA

ICP DAS USA PISO-P64 Series Manual de usuario

ICP DAS USA

ICP DAS USA 7064 Manual de usuario

ICP DAS USA

ICP DAS USA A-626 Manual de usuario

ICP DAS USA

ICP DAS USA ET-2242 Manual de usuario

ICP DAS USA

ICP DAS USA I-8017 Series Manual de usuario

ICP DAS USA

ICP DAS USA I-87211W Manual de usuario

ICP DAS USA

ICP DAS USA M-7052 Manual de usuario

ICP DAS USA

ICP DAS USA DN-8K32R Manual de usuario

ICP DAS USA

ICP DAS USA PCI-P16POR16U Manual de usuario

ICP DAS USA

ICP DAS USA ECAT-2000 Series Manual de usuario

ICP DAS USA

ICP DAS USA HRT-711 Manual de usuario

Manuales populares de Sistema de E/S de otras marcas

WAGO

WAGO 750-344 Manual de usuario

Teknim

Teknim TWM-1887 Manual de instrucciones

Intelligent Appliance

Intelligent Appliance IA-2662-E Manual de usuario

BERGHOF

BERGHOF ECC DIO 16/16 Manual de instrucciones

Advantech

Advantech PCM-27J3AU Manual de instalación y operación

Festo

Festo CP-E08-M12-CL Manual de usuario

Measurement Computing

Measurement Computing PCI-DAS64/M1/16 Manual de usuario

Hitachi

Hitachi HX-RIO3 Series Manual de usuario

NUUO

NUUO SCB-A08 Manual de usuario

M-system

M-system R3Y-RS8 Manual de usuario

jablotron

jablotron JB-110N Manual de usuario

Omron

Omron SYSMAC C200H Manual de usuario

DOLD

DOLD SAFEMASTER M Manual de usuario

ABB

ABB OPT-MF-001 Manual de usuario

Omron

Omron SYSMAC C2000H Manual de usuario

Helmholz

Helmholz TB20 Manual de usuario

Automationdirect.com

Automationdirect.com DL305 Manual de usuario

WAGO

WAGO I/O-SYSTEM 750 Manual de usuario