Iconic Cruiser Manual de usuario
Owner's Manual
iconic Cruiser
Welcome
Thank you for purchasing the Iconic Cruiser through www.iconicebikes.com. We take pride in
bringing you a quality product that will offer years of enjoyment. Please read and understand this
manual fully before assembling and riding your ebike. If you have questions after reading this manual,
please contact us at [email protected].
Assembly Video &
Online Product Manual
Please scan QR code
Online Resource
For more information, please visit the
Iconic EBikes website
www.iconicebikes.com
Please Read First
WARNING
Like any sport, bicycling involves risk of damage, injury, and death. By choosing to ride a ebike, you
assume the responsibility for that risk, so you need to know, and practice the rules of safe and
responsible riding and the proper use and maintenance of this bike. Proper use and maintenance of your
bike reduces risk of damage, injury, and death.
WARNING
It is your responsibility to familiarize yourself with the local laws and requirements of operating this
ebike in the area(s) where you ride.
WARNING
Always wear an approved bicycle helmet whenever riding a bike and ensure that all helmet manufacturer
instructions are used for fit and care of your helmet. Failure to wear a helmet when riding may result in
serious injury or death.
A Note for Parents and Guardians
As a parent or guardian, you are responsible for the activities and safety of your child. The Iconic Cruiser
is not designed for use by children under the age of 18.
WARNING
OWNER'S MANUAL UPDATES
The following information updates your ebike's Owner's Manual. Please read it carefully. Keep your owner's manual
and any other documents that came with your ebike. All content in this update and the manual is subject to change or
withdrawal without notice. Visit www.iconicebikes.com to view and download the latest version. ICONIC Ebikes
makes every effort to ensure the accuracy of its documentation and assumes no responsibility or liability if any errors
or inaccuracies appear within.
Incorrect assembly, maintenance, or use of your ebike can cause component or performance failure,
loss of control, serious injury, or death. Even if you're an experienced bike rider, you must read and
understand the entire manual skills, and tools needed to correctly perform all assembly steps in the
manual and the assembly video at www.iconicebikes.com. Consult a local, certified, reputable bike
mechanic to ensure proper assembly.
To reduce the risk of injury, close supervision is necessary when the product is used near children.
WARNING
WARNING
Guard against rust, water damage, and corrosion
Store under shelter and in an upright position; avoid leaving the bike in the rain or exposed to corrosive substances such as
water, salt, or de-icing substances. If exposed to rain, dry your bike afterward, and apply an anti-rust treatment to the
chain and other unpainted steel surfaces.
To clean your ebike, turn the bike and battery off and wipe the frame with a clean, damp cloth. If needed, apply a mild, non-
corrosive detergent mixture to the damp cloth and wipe the frame. Dry by wiping with a clean, dry cloth. Never use high-
pressure water on your ebike. Wipe down your bike frequently and wipe or spray all unpainted mechanical parts with anti-
rust treatment.
If painted metal parts become scratched or chipped, please use the provided touch up paint to prevent rust.
Never immerse or submerge the bike or any components in water or liquid, which can damage the electrical system.
Avoid riding on the beach, in coastal areas with high-salinity fog, or on surfaces treated with salt or de-icing compounds.
Doing so exposes your bike to salt or other substances that are very corrosive. Corrosion of electrical components can lead
to permanent, irreversible damage that can cause battery failure, electrical system failure, or electrical fire. Damage from
corrosion is not covered under warranty.
Like any vehicle used outdoors, your ebike needs care to ensure it isn't damaged by the elements. Follow these steps for a
long, healthy life for your ebike:
Damage to your ebike's electrical system caused in any manner, including water intrusion, can lead to
battery failure, electrical system malfunction, or electrical fire and consequent property damage, injury, or
death. Follow all recommendations to minimize chance of water damage. If you have any questions, contact
WARNING
Additional precautions regarding electrical components
Using a damaged battery or charger can create additional bike damage or a fire hazard. Stop using your
battery and charger and contact ICONIC EBikes immediately if any of the following occur: (1) Your charger's
flexible power cord or output cable or any of the electrical cables on your bike is frayed, has broken
insulation, or any other signs of damage, (2) Your battery or charger is physically damaged, non-functional,
or performing abnormally,(3) Your battery or charger experienced a significant impact from a fall or crash,
with or without obvious signs of damage, or (4) Your charger becomes too hot to touch (it's designed to
get warm with normal use), makes a funny smell, or shows other signs of overheating. Store any damaged
battery or charger in a safe location and, as soon as possible, recycle or otherwise dispose of it according
replacement battery or charger.
WARNING
To reduce the risk of fire, connect the batery charger only to a standard 110/220-volt standard home
power outlet circuit in accordance with the National Electrical Code, NFPA70.
CAUTION
How Pedal Assist Works
The rider can engage the pedal assist system (PAS) while pedaling, and it will call up assistance from the motor to help propel
the bike forward. Pedal assist uses a cadence sensor built into the drive train of the bike. The sensor detects when the rider
revolves the pedal and signals the electric motor to provide the level of pedal assistance that has been selected. The Iconic
Cruiser comes with pedal assist modes 0-5.
This ebike is equipped with two ways for a rider to use power assistance from the motor to propel the bike forward: a
pedal assist system (PAS) and a thumb throttle.
HOW THE ELECTRICAL SYSTEM WORKS
How the Throttle Works
The throttle is located on the right side of the handlebar. The rider can use it with a push of the thumb to propel the bike
forward without pedaling. Please note thumb throttle will not work in (PAS) Mode 0.
To engage the throttle while riding, slowly and carefully press down on the throttle. The more you press, the more powerfully
the throttle will propel the bike forward. Once you release the throttle or apply the brakes, the throttle will no longer propel the
bike forward. Always keep one hand on the brake lever and be prepared to squeeze the lever to disengage the throttle if
needed. Please note: before mounting or dismounting the bike, the power should be turned off to prevent accidentally
engaging the throttle.
Please Note: before mounting or dismounting the bike, the power should be turned off to prevent
accidentally engaging the throttle.
CAUTION
Do not touch the brake rotor
Touching the brake rotor, which has sharp edges and can get very hot while you're riding, can cause
serious injury, slicing damage, or burns. The brake rotor heats up from normal friction when the brake pads
press against the brake rotor to slow or stop the bike. Touching the brake rotor with bare skin can also
transfer natural oils to the rotor, which can decrease braking performance. Do not touch the brake rotor,
especially when it's in motion or after you've been riding your bike. Touch the brake rotor only for
necessary maintenance when it is cool, not moving, and while you are wearing gloves or using other
appropriate protective equipment.
WARNING
Warranty update
Notwithstanding the warranty information in the manual, the warranty period begins at the date of receipt of this
ebike by the customer. The latest version of the warranty terms is available at
www.iconicebikes.com
TABLE OF CONTENTS
Using This Manual
General Information
Assembly Instructions
Battery Charging
Operation
Maintenance
Troubleshooting
Warnings and Safety
Limited Warranty
Link to Assembly Video and Online Resources
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
1
2
6
17
25
35
42
44
50
55
This manual contains details of the product, its equipment, and information on operation, maintenance, and other helpful tips
for owners. Read it carefully and familiarize yourself with the ebike before using it to ensure safe use and prevent accidents.
This manual contains many warnings and cautions concerning the safe operation and consequences if proper setup, operation,
and maintenance are not performed. All information in this manual should be carefully reviewed and if you have any questions
you should contact [email protected] immediately.
The notes
，
warnings, and cautions contained within the manual and marked by the triangular Caution Symbol
at the right of this page should be given special care. Users should also pay special attention to information
marked in this manual beginning with NOTICE.
Keep this manual for future reference, however all content in this manual is subject to change or withdrawal without notice.
Visit http://www.iconicebikes.com to view and download the latest version. ICONIC EBikes makes every effort to ensure the
accuracy of its documentation and assumes no responsibility or liability if any errors or inaccuracies appear within.
Assembly and first adjustment of your ebike from ICONIC EBikes requires special tools and skills and it is recommended that
this should be done by a certified, reputable bike mechanic if possible.
Because it is impossible to anticipate every situation or condition that can occur while riding, this manual makes no
representations about the safe use of ebikes under all conditions. There are risks associated with the use of any ebike that
cannot be predicted or avoided and are the sole responsibility of the rider.
Using This Manual
1
Tabla de contenidos
