Icom IDAS IC-F3103D Manual de usuario

INSTRUCTION MANUAL

iF3103D

VHF dPMR HANDHELD TRANSCEIVER

iF3102D

The photo shows

the VHF transceiver.

iF4103D

UHF dPMR HANDHELD TRANSCEIVER

iF4102D

FOREWORD

Thank you for choosing this Icom product. This product is

designed and built with Icom’s state of the art technology and

craftsmanship. With proper care this product should provide you

with years of trouble-free operation.

READ ALL INSTRUCTIONS carefully and completely before

using the transceiver.

SAVE THIS INSTRUCTION MANUAL— This instruction

manual contains important operating instructions for the IC-F3102D,

IC-F3103D VHF dPMR HANDHELD TRANSCEIVERS and the IC-

F4102D, IC-F4103D UHF dPMR HANDHELD TRANSCEIVERS.

This instruction manual includes some functions which are us-

able only when they are preset by your dealer. Ask your dealer

for details.

EXPLICIT DEFINITIONS

WORD DEFINITION

RDANGER! Personal death, serious injury or an explo-

sion may occur.

RWARNING! Personal injury, ﬁre hazard or electric shock

may occur.

CAUTION Equipment damage may occur.

NOTE

If disregarded, inconvenience only. No risk

of personal injury, ﬁre or electric shock.

Icom, Icom Inc. and Icom logo are registered trademarks of Icom Incorporated

(Japan) in Japan, the United States, the United Kingdom, Germany, France,

Spain, Russia, Australia, New Zealand, and/or other countries.

IDAS is trademark of Icom Incorporated (Japan).

dPMR and the dPMR logo are trademarks of the dPMR MoU Association.

All other products or brands are registered trademarks or trademarks of their re-

spective holders.

VOICE CODING TECHNOLOGY

The AMBE+2™ voice coding Technology embodied in this product

is protected by intellectual property rights including patent rights,

copyrights and trade secrets of Digital Voice Systems, Inc. This

voice coding Technology is licensed solely for use within this Com-

munications Equipment. The user of this Technology is explicitly

prohibited from attempting to extract, remove, decompile, reverse

engineer, or disassemble the Object Code, or in any other way con-

vert the Object Code into a human-readable form. U.S. Patent Nos.

#8,595,002, #8,359,197, #8,315,860, #8,200,497, #7,970,606,

#6,912,495 B2.

Icom is not responsible for the destruction or damage to the Icom

transceiver, if the malfunction is because of:

• Force majeure, including, but not limited to, res, earthquakes,

storms, ﬂoods, lightnings, or other natural disasters, disturbanc-

es, riots, war, or radioactive contamination.

• The use of Icom transceiver with any equipment that is not man-

ufactured or approved by Icom.

iii

PRECAUTIONS

RDANGER! NEVER short terminals of the battery pack. Also,

current may ﬂow into nearby metal objects such as a necklace, so

be careful when placing battery packs (or the transceiver) in hand-

bags, etc. Simply carrying with or placing near metal objects such

as a necklace, etc. may cause shorting. This may damage not only

the battery pack, but also the transceiver.

RDANGER! Use and charge only speciﬁed Icom battery packs

with Icom transceivers or Icom chargers. Only Icom battery packs

are tested and approved for use with Icom transceivers or charged

with Icom chargers. Using third-party or counterfeit battery packs

or chargers may cause smoke, ﬁre, or cause the battery to burst.

RWARNING! NEVER hold the transceiver so that the antenna

is very close to, or touching exposed parts of the body, especially

the face or eyes, while transmitting. The transceiver will perform

best if the microphone is 5 to 10 cm away from the lips and the

transceiver is vertical.

RWARNING! NEVER operate the transceiver with a headset

or other audio accessories at high volume levels. The continuous

high volume operation may cause a ringing in your ears. If you ex-

perience the ringing, reduce the volume level or discontinue use.

RWARNING! NEVER operate the transceiver while driving a

vehicle. Safe driving requires your full attention—anything less may

result in an accident.

CAUTION: MAKE SURE the ﬂexible antenna, battery pack,

and jack cover are securely attached to the transceiver, and that

the antenna and battery pack are dry before attachment. Exposing

the inside of the transceiver to dust or water will result in serious

damage to the transceiver.

PRECAUTIONS

DO NOT operate the transceiver near unshielded electrical blast-

ing caps or in an explosive atmosphere.

DO NOT push [PTT] when you do not actually intend to transmit.

DO NOT operate or place the transceiver in direct sunlight or in

areas with temperatures below –25°C or above +55°C.

DO NOT modify the transceiver. The speciﬁcations may change

and then not comply with the requirements of a corresponded

regulation. The transceiver warranty does not cover any problems

caused by unauthorized modiﬁcation.

DO NOT use harsh solvents such as benzine or alcohol when

cleaning, as they will damage the transceiver surfaces.

BE CAREFUL! The transceiver will become hot when operating

it continuously for long periods of time.

KEEP the transceiver away from heavy rain, and never immerse

it in the water. The transceiver meets IP54* requirements for dust-

protection and splash resistance. However, once the transceiver

has been dropped, dust-protection and splash resistance cannot

be guaranteed because of possible damage to the transceiver’s

case or the waterproof seal.

* Only when the battery pack/case and jack cover are attached.

MAKE SURE to turn OFF the transceiver before connecting or

disconnecting the supplied or optional accessory.

TABLE OF CONTENTS

FOREWORD ........................................................................................ i

EXPLICIT DEFINITIONS...................................................................... i

VOICE CODING TECHNOLOGY ........................................................ ii

PRECAUTIONS.............................................................................. iii, iv

1 ACCESSORIES ......................................................................... 1–4

■Supplied accessories.................................................................. 1

■Accessory attachments .............................................................. 1

2 PANEL DESCRIPTION ............................................................ 5–13

■Front, top and side panels .......................................................... 5

■LED indicator .............................................................................. 7

■Programmable function keys .................................................... 10

3 BASIC OPERATION .............................................................. 14–26

■Turning ON the power............................................................... 14

■Channel selection ..................................................................... 15

■Call procedure .......................................................................... 16

■Receiving and transmitting ....................................................... 17

■Setting the microphone gain..................................................... 20

■Setting the squelch level........................................................... 21

■Setting the Beep level............................................................... 22

■Setting the Ringer level............................................................. 23

■Output power level selection..................................................... 24

■Priority A channel selection ...................................................... 24

■Lone Worker Emergency Call................................................... 25

■Emergency Call ........................................................................ 26

4 dPMR OPERATION ............................................................... 27–32

■dPMR operation........................................................................ 27

■Receiving a call......................................................................... 28

■Transmitting a call ..................................................................... 30

■Position data transmission........................................................ 32

■Status message transmission................................................... 32

■Scrambler function.................................................................... 32

5 BATTERY CHARGING .......................................................... 33–43

■Caution (for the BP-264 ni-mh battery).................................... 33

■Caution (for the BP-265 Li-ion battery)................................... 35

■Battery chargers ....................................................................... 38

6 BATTERY CASE .......................................................................... 44

■Optional battery case (BP-263) ................................................ 44

7 OPTIONS ............................................................................... 45–50

■VOX function ............................................................................. 48

8 INFORMATION ............................................................................ 51

■Disposal.................................................................................... 51

TABLE OF CONTENTS

■Accessory attachments

DFlexible antenna

Connect the ﬂexible antenna to the an-

tenna connector.

CAUTION:

• NEVER carry the transceiver by

holding the antenna.

• DO NOT

connect the antenna

other than listed above.

• Transmitting without an antenna will

damage the transceiver.

■Supplied accessories

The following accessories are supplied with the transceiver.

1ACCESSORIES

Battery pack*

Belt clip* Jack cover

(with screws)

Battery charger* Power adapter*

* Not supplied, or the shape is different, depending on the version.

Flexible antenna

(This illustration is for the VHF type.)

ACCESSORIES

DBelt clip

To attach the belt clip:

➥Slide the belt clip in the direction of the arrow until the belt clip

locks in place, and makes a ‘click’ sound.

Battery pack

Belt clip

To detach the belt clip:

qRemove the battery pack from the transceiver, if it is attached.

(p. 3)

wLift the tab up (q), and slide the belt clip in the direction of the

arrow (w).

Ta b

1ACCESSORIES

DBattery pack or case

To attach the battery pack or case:

q Fit the battery pack/case in the direction of the arrow, then close

it.

w Hook the latch until it makes a ‘click’ sound.

Latch

Battery pac

k/case

To remove the battery pack/case:

Be careful! The latch is tightly locked, so use caution when re-

leasing it. DO NOT use your ﬁnger nail. Use the edge of a coin

or screwdriver tip to carefully release it

qUnhook the latch.

wLift up the

battery pack/case

in the direction of the arrow.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Transceptor de Icom

Manuales populares de Transceptor de otras marcas

Yaesu

Yaesu FT-7B Manual de usuario

Kenwood

Kenwood ProTalk TK-3201 Manual de usuario

Texas Instruments

Texas Instruments TLK10232 Manual de usuario

Mizuho

Mizuho MX-2 Guía del producto

Kenwood

Kenwood TK-3180 Manual de operación y mantenimiento

Blitz

Blitz MJ-398U Manual de usuario

Utilicom

Utilicom LongRanger 2050 Manual de usuario

Standart

Standart HX290UKA Manual de usuario

Altronix

Altronix Pace1PTM Manual de usuario

Kirisun

Kirisun PT2208 Manual de usuario

ELECRAFT

ELECRAFT KX2 Manual de usuario

Zodiac

Zodiac K3 Manual de usuario

Assa Abloy

Assa Abloy SecureComm HKC GSM-WIFI U Manual de usuario

Kenwood

Kenwood TK-2217 Manual de usuario

Siemens

Siemens PSO 4000 Manual de usuario

Kenwood

Kenwood TS-590SG Manual de usuario

Midland

Midland G8E-BT Manual

ComNav

ComNav Mariner X2 Manual de usuario

Icom iDAS IC-F3103D Manual de usuario

Manuales populares de Transceptor de otras marcas