Icom IC-F3100D series Manual de usuario

INSTRUCTION MANUAL

This device complies with Part 15 of the FCC

Rules. Operation is subject to the condition that

this device does not cause harmful interference.

The photo shows

the VHF transceiver.

UHF TRANSCEIVERS

iF4100D

Series

VHF TRANSCEIVERS

iF3100D

Series

Limited functions only

FOREWORD

Thank you for choosing this Icom product.This product is designed

and built with Icom’s state of the art technology and craftsman-

ship. With proper care this product should provide you with years of

trouble-free operation.

IMPORTANT

READ ALL INSTRUCTIONS carefully and completely before

using the transceiver.

SAVE THIS INSTRUCTION MANUAL— This instruc-

tion manual contains important operating instructions for the

IC-F3101D/IC-F3103D/IC-F3106D/IC-F3108D VHF TRANSCEIV-

ERS and the IC-F4101D/IC-F4103D/IC-F4106D/IC-F4108D UHF

TRANSCEIVERS.

Icom, Icom Inc. and the Icom logo are registered trademarks of Icom Incorporated

(Japan) in Japan, the United States, the United Kingdom, Germany, France,

Spain, Russia, Australia, New Zealand, and/or other countries.

EXPLICIT DEFINITIONS

WORD DEFINITION

RDANGER! Personal death, serious injury or an

explosion may occur.

RWARNING! Personal injury, ﬁre hazard or electric

shock may occur.

CAUTION Equipment damage may occur.

NOTE

If disregarded, inconvenience only. No risk

of personal injury, ﬁre or electric shock.

Icom is not responsible for the destruction or damage to the

Icom transceiver, if the malfunction is because of:

• Force majeure, including, but not limited to, ﬁres,

earthquakes, storms, ﬂoods, lightnings, or other natural

disasters, disturbances, riots, war, or radioactive

contamination.

• The use of Icom transceiver with any equipment that is not

manufactured or approved by Icom.

iii

PRECAUTIONS

RDANGER! NEVER short terminals of the battery pack.

Also, current may ﬂow into nearby metal objects such as a key, so

be careful when placing the battery packs (or the transceiver) in

handbags, and so on.

Simply carrying with or placing near metal objects such as a key,

and so on may cause shorting. This may damage not only the

battery pack, but also the transceiver.

RDANGER! Use and charge only speciﬁed Icom battery packs

with Icom transceivers or Icom chargers. Only Icom battery packs

are tested and approved for use with Icom transceivers or charged

with Icom chargers. Using third-party or counterfeit battery packs

or chargers may cause smoke, ﬁre, or cause the battery to burst.

RWARNING! NEVER hold the transceiver so that the antenna

is very close to, or touching exposed parts of the body, especially

the face or eyes, while transmitting. The transceiver will perform

best if the microphone is 5 to 10 cm (2 to 4 inches) away from the

lips and the transceiver is vertical.

RWARNING! NEVER operate the transceiver with a headset

or other audio accessories at high volume levels. The continuous

high volume operation may cause a ringing in your ears. If you

experience the ringing, reduce the volume level or discontinue use.

RWARNING! NEVER operate the transceiver while driving a

vehicle. Safe driving requires your full attention—anything less may

result in an accident.

CAUTION: MAKE SURE the ﬂexible antenna, battery pack

and jack cover are securely attached to the transceiver, and that

the antenna and battery pack are dry before attachment. Exposing

the inside of the transceiver to dust or water will result in serious

damage to the transceiver.

DO NOT operate the transceiver near unshielded electrical

blasting caps or in an explosive atmosphere.

DO NOT push [PTT] when you do not actually intend to transmit.

DO NOT operate or place the transceiver in direct sunlight or in

areas with temperatures below –30°C (+22°F) or above +60°C

(+140°F).

DO NOT modify the transceiver. The speciﬁcations may change

and then not comply with the requirements of a corresponded

regulation. The transceiver warranty does not cover any problems

caused by unauthorized modiﬁcation.

DO NOT use harsh solvents such as benzine or alcohol when

cleaning, as they will damage the transceiver surfaces.

BE CAREFUL! The transceiver will become hot when operating

it continuously for long periods of time.

KEEP the transceiver away from heavy rain, and never immerse

it in the water. The transceiver meets IP54* requirements for dust-

protection and splash resistance. However, once the transceiver

has been dropped, dust-protection and splash resistance cannot

be guaranteed because of possible damage to the transceiver’s

case or the waterproof seal.

* Only when the battery pack/case and jack cover are attached.

Even when the transceiver power is OFF, a slight current still

ﬂows in the circuits. Remove the battery pack or batteries from

the transceiver when not using it for a long time. Otherwise, the

installed battery pack or batteries will become exhausted, and will

need to be recharged or replaced.

MAKE SURE to turn OFF the transceiver before connecting or

disconnecting the supplied or optional accessory.

FCC INFORMATION

• FOR CLASS B UNINTENTIONAL RADIATORS:

This equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy and, if

not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to

radio or television reception, which can be determined by turning

the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for

help.

CAUTION: Changes or modiﬁcations to this device, not expressly

approved by Icom Inc., could void your authority to operate this

transceiver under FCC regulations.

VOICE CODING TECHNOLOGY

The AMBE+2™ voice coding Technology embodied in this product

is protected by intellectual property rights including patent rights,

copyrights and trade secrets of Digital Voice Systems, Inc. This

voice coding Technology is licensed solely for use within this

Communications Equipment. The user of this Technology is explicitly

prohibited from attempting to extract, remove, decompile, reverse

engineer, or disassemble the Object Code, or in any other way convert

the Object Code into a human-readable form. U.S. Patent Nos.

#5,870,405, #5,826,222, #5,754,974, #5,701,390, #5,715,365,

#5,649,050, #5,630,011, #5,581,656, #5,517,511, #5,491,772,

#5,247,579, #5,226,084 and #5,195,166.

SUPPLIED ACCESSORIES

The following accessories are supplied with the transceiver.

Flexible antenna

(This illustration is for the VHF type.)

Battery pack*

Belt clip* Jack cover

(with screws)

Battery charger* Power adapter*

* Not supplied, or the shape is different, depending on the version.

vii

TABLE OF CONTENTS

FOREWORD ........................................................................................ i

IMPORTANT......................................................................................... i

EXPLICIT DEFINITIONS..................................................................... ii

PRECAUTIONS...................................................................................iii

FCC INFORMATION ........................................................................... v

VOICE CODING TECHNOLOGY ....................................................... vi

SUPPLIED ACCESSORIES............................................................... vi

1 ACCESSORIES ......................................................................... 1–4

■Accessory attachments .............................................................. 1

2 PANEL DESCRIPTION............................................................ 5–11

■Front, top and side panels .......................................................... 5

■LED indicator .............................................................................. 7

■Programmable function keys ...................................................... 8

3 BASIC OPERATION .............................................................. 12–24

■Turning power ON..................................................................... 12

■Channel selection ..................................................................... 13

■Call procedure .......................................................................... 14

■Receiving and transmitting ....................................................... 15

■Setting the microphone gain..................................................... 18

■Setting the squelch level........................................................... 19

■Setting the Beep level............................................................... 20

■Setting the Ringer level............................................................. 21

■Output power level selection..................................................... 22

■Priority A channel selection ...................................................... 22

■MDC 1200 system operation .................................................... 23

■Lone Worker Emergency Call................................................... 23

■Emergency Call ........................................................................ 24

viii

4 IDAS OPERATION................................................................. 25–30

■IDAS operation ......................................................................... 25

■IDAS-Trunk operation ............................................................... 25

■Receiving a call.........................................................................26

■Transmitting a call ..................................................................... 28

■Position data transmission........................................................ 30

■Status message transmission................................................... 30

■Encryption function ................................................................... 30

5 BATTERY CHARGING .......................................................... 31–41

■Caution (for the BP-264 ni-mh battery).................................... 31

■Caution (for the BP-265 Li-ion battery)................................... 33

■Battery chargers ....................................................................... 36

6 BATTERY CASE .......................................................................... 42

■Optional battery case (BP-263) ................................................ 42

7 OPTIONS ............................................................................... 43–48

■VOX function............................................................................. 46

8 SAFETY TRAINING INFORMATION ..................................... 49–50

(INFORMATION EN MATIÈRE DE SÉCURITÉ).................... 51–52

■Accessory attachments

DFlexible antenna

Connect the ﬂexible antenna to the antenna connector.

CAUTION:

• NEVER carry the transceiver by

holding the antenna.

• DO NOT connect the antenna

other than listed on page 44.

• Transmitting without an antenna

may damage the transceiver.

ACCESSORIES

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Transceptor de Icom

Icom

Icom IC-M600 Manual de usuario

Icom

Icom ID-52A Manual de usuario

Icom

Icom IC-F4101D Manual de usuario

Icom

Icom IC-M85UL Manual de usuario

Icom

Icom ic-F3162T/S Manual de usuario

Icom

Icom ic-2730A Manual del propietario

Icom

Icom IC-M700TY Manual de usuario

Icom

Icom IC-F3021T Manual de usuario

Icom

Icom IC-7200 Manual de usuario

Icom

Icom IC-F44GS Manual de usuario

Icom

Icom IC-E92D Manual de usuario

Icom

Icom IC-9700 Guía de configuración

Icom

Icom IC-M88 Manual de usuario

Icom

Icom IC-E92D Manual de usuario

Icom

Icom IC-2200H Manual de usuario

Icom

Icom IC-706 Manual de usuario

Icom

Icom IC-M94D Manual de usuario

Icom

Icom IC-9700 Instrucciones de instalación y funcionamiento

Icom

Icom IC-E2820 Manual de usuario

Icom

Icom IC-2100H Manual de usuario

Icom

Icom IC-iF11/S Manual de usuario

Icom

Icom IC-3200A Manual de usuario

Icom

Icom IC-M411 Manual de usuario

Icom

Icom IC-229A Manual de usuario

Manuales populares de Transceptor de otras marcas

Yaesu

Yaesu FT-7B Manual de usuario

Kenwood

Kenwood ProTalk TK-3201 Manual de usuario

Texas Instruments

Texas Instruments TLK10232 Manual de usuario

Mizuho

Mizuho MX-2 Guía del producto

Kenwood

Kenwood TK-3180 Manual de operación y mantenimiento

Blitz

Blitz MJ-398U Manual de usuario

Utilicom

Utilicom LongRanger 2050 Manual de usuario

Standart

Standart HX290UKA Manual de usuario

Altronix

Altronix Pace1PTM Manual de usuario

Kirisun

Kirisun PT2208 Manual de usuario

ELECRAFT

ELECRAFT KX2 Manual de usuario

Zodiac

Zodiac K3 Manual de usuario

Assa Abloy

Assa Abloy SecureComm HKC GSM-WIFI U Manual de usuario

Kenwood

Kenwood TK-2217 Manual de usuario

Siemens

Siemens PSO 4000 Manual de usuario

Kenwood

Kenwood TS-590SG Manual de usuario

Midland

Midland G8E-BT Manual

ComNav

ComNav Mariner X2 Manual de usuario