Icom IC-7300 Manual de usuario

ICOM –IC7300 –QUICK START OPERATING GUIDE

By K7HCP

The ICOM IC-7300 is an HF + 6 meter, multi-mode, self-contained Software

Defined Radio (SDR) transceiver with knobs, buttons and a touch screen. It also

has a real-time spectrum display with pan adapter and water fall displays.

It stands alone and does not require attachment to a computer to function like

most SDR radios in the past.

However to operate this radio using digital mode computer software such as

WSJT-X (FT8) or DigiPan (PSK31) all that is required is a single USB cable with NO

other digital interface hardware required such as sound card interface device.

GETTING STARTED:

Press the POWER button

Turn the AF gain to 9 o-clock

Turn the RF gain/Sql to 12 o-clock

Turn the MAIN DIAL (the big knob) to change frequency

To change Bands:

Touch the MHz frequency display area of the touch screen (touch the “7”of 7.073)

To change Mode:

Touch the Mode area displayed on the touch screen (touch the “LSB”)

To change Filters:

Touch the Filter area displayed on the touch screen (touch the “Fil2”)

To display the Scope:

Press the M.Scope button located below the display to display the small spectrum scope.

Press and Hold the M.Scope button located below the display to display the large spectrum

scope.

NOTE: The “Multi -”Function Control Knob”located just to the right of the display and near the top of

the radio. This knob is used the make selections from various lists of options from time to time.

Press the Multi button, then touch the desired selection. Then turn the knob to choose your setting.

Finally press the button to exit.

To change Frequency:

There are several ways to change the current frequency of the transceiver:

1. Turn the Main Dial (the big knob)

2. While displaying the Spectrum Scope, touch the area of a desired signal spike.

The scope display area touched will be magnified.

Touch the magnified area again and the transceiver will change frequency corresponding to

the frequency of the desired signal.

3. Using pre stored Memories:

Press the MENU button

Then press the MEMORIES button

Then rotate the MULTI knob to select the desired memory channel

Then touch the desired memory channel to choose your selection.

To display the Meters:

Press the MENU button

Then press the METER button

Otros manuales para IC-7300

12

Tabla de contenidos

Otros manuales de Transceptor de Icom

Icom

Icom IC-7100 Guía de configuración

Icom

Icom IC-9700 Manual de usuario

Icom

Icom IC-F621 Manual de usuario

Icom

Icom IC-F2721 Manual de usuario

Icom

Icom IC-M801E Manual de usuario

Icom

Icom IC-F620 Manual de usuario

Icom

Icom IC-F5061 Manual de usuario

Icom

Icom IC-F3023T Manual de usuario

Icom

Icom IC-F6021 Manual de usuario

Icom

Icom IC-F3021S Manual de usuario

Icom

Icom IC-M323 Manual de usuario

Icom

Icom IC-M33 Manual de usuario

Icom

Icom IC-X2A Manual de usuario

Icom

Icom IC-706 Manual de usuario

Icom

Icom IC-F3061T Instrucciones de construcción

Icom

Icom IC-F3061T/S Manual de usuario

Icom

Icom IC-F4210D Series Manual de usuario

Icom

Icom IC-M504 Manual de usuario

Icom

Icom IC-F3162DT Manual de usuario

Icom

Icom IC-E92D Manual de usuario

Icom

Icom IC-04A Manual de usuario

Icom

Icom IC-775DSP Manual de usuario

Icom

Icom IC-2100H Manual de usuario

Icom

Icom IC-720 Manual de usuario

Manuales populares de Transceptor de otras marcas

Yaesu

Yaesu FT-7B Manual de usuario

Kenwood

Kenwood ProTalk TK-3201 Manual de usuario

Texas Instruments

Texas Instruments TLK10232 Manual de usuario

Mizuho

Mizuho MX-2 Guía del producto

Kenwood

Kenwood TK-3180 Manual de operación y mantenimiento

Blitz

Blitz MJ-398U Manual de usuario

Utilicom

Utilicom LongRanger 2050 Manual de usuario

Standart

Standart HX290UKA Manual de usuario

Altronix

Altronix Pace1PTM Manual de usuario

Kirisun

Kirisun PT2208 Manual de usuario

ELECRAFT

ELECRAFT KX2 Manual de usuario

Zodiac

Zodiac K3 Manual de usuario

Assa Abloy

Assa Abloy SecureComm HKC GSM-WIFI U Manual de usuario

Kenwood

Kenwood TK-2217 Manual de usuario

Siemens

Siemens PSO 4000 Manual de usuario

Kenwood

Kenwood TS-590SG Manual de usuario

Midland

Midland G8E-BT Manual

ComNav

ComNav Mariner X2 Manual de usuario