ICEMASTER G40 Guía
Page 1 of 5 www.KegLand.com.au Last Updated 02-Oct-18 4:57:00 PM
Icemaster G40 Fan Maintenance
Step 1:
Remove the 5 bolts holding the
lower side wall.
You can go from either side,
depending on your model / where
the fans cords are located.
Page 2 of 5 www.KegLand.com.au Last Updated 02-Oct-18 4:57:00 PM
Step 2:
Remove the side plate and sit it to
the side.
Page 3 of 5 www.KegLand.com.au Last Updated 02-Oct-18 4:57:00 PM
Step 4:
Locate the fan.
Page 4 of 5 www.KegLand.com.au Last Updated 02-Oct-18 4:57:00 PM
Step 4:
Remove the x2 fan mounting
bracket bolts.
Skip to Step 5 if you are confident
you can reach the underside bolts in
step 5.
Page 5 of 5 www.KegLand.com.au Last Updated 02-Oct-18 4:57:00 PM
Step 5:
Once the fan has been successfully
unmounted by the holding bracket
bolts. You will notice two underside
bolts holding the fan onto the
bracket.
These screws may have come loose
in transit. They will require a tighten
and then the unit put back together
in the reverse step order.
