IBM Low Power 667Mhz Panel PC PPC-1510PT Manual de usuario

-1 -

User’s Manual

PPC-1510PT

15.1” TFT Low Power 667Mhz Panel PC

-2 -

Ⅰ.Pictures of PPC-157T

Silver (Stainless Steel Color) VESA-75

VESA-100

I/O ports

-3 -

Ⅱ.Panel PC Specifications

◆Display-15.1"colorTFT flat panel

◆Display Type -TFT LCD panel

◆Luminance –200-250 cd/m2 brightness luminance

◆CPU -P-III equivalent Low power 667Mhz CPU L1 & L2 cache built on CPU

◆System Chipset -Twister-T , VIA VT8606 , 82C686B

◆Front Bezel -Thick10mmAluminum-alloyhairlineanodizingtreatmentfrontbezel

◆Housing & Wall-mounting -Rugged1.2mmthicksteelmetalwithwhitepaintingVESA–75and

VESA-100 compliant

◆Surface Treatment of Front Panel -Super high-endhairlineanodizingtreatment,color

◆Standard Colors -Stainless Steel silver color

◆Front Panel Protection -MeetNEMA 4, 12 and IP65, 56 water resistant EIA standard

◆SystemMemory -OneslimsizeCD-ROM, 24x speed built in

◆CD-ROM (optional) -OneslimsizeCD-ROM,24xspeedbuiltin

◆HDD (optional) –10-20slimsizeHDD

◆Disk On Module (optional) -SupportDOMupto512MB

◆DiskOnChip(optional) -SupportM-System’sDOC upto288MB

◆Serial ports -4x COMs ( 3 x RS232 port ,1 xRS232/422/485 port)

◆USB -2 x USB ports and IrDA pin header on board

◆Parallel Port -LPT port for Printer connection.

◆Keyboard and Mouse -OnePS/2KB/Mouse port

◆Audio I/O -Microphone, Speaker, Line-in

◆Network Interface Controller Chipset -Realtek8139C,support 10/100 Mbp,auto-negotiation ,auto-switch

LAN

◆VGA -Display Controller Chipset -S3Savage4,supportAGP4XLCD/2-channel LVDS,TFT,

DSTN LCD/CRT with 32MB share Video memory,3D/2Dsupport

◆DVD MPEG-2-support DVD video playback

◆Touch Panel (Optional) -Long-life 6-wireresistive Touch screen

◆Power Requirements -Long-life 6-wireresistiveTouch screen

◆Dimension ( WxHxD) -

◆Operating Temperature -0 to 55°C (32 to 131°F)

-4 -

Ⅲ. Power Supply

Input : 100-240VAC ~ 2A 50/60Hz

DC Output : +5V/7A, +12V/1.5A

-12V/0.3A, +5Vsb/0.75A

Ⅳ. NAGASAKI Panel PC Comparison table

Model no. SBC CPU Power

PPC-64T NASA-6820 667Mhz onboard AC-DC Adaptor

PPC-70T MS-2100 300Mhz onboard AC-DC Adaptor

PPC-106T NASA-6109 667Mhz onboard AC-DC Adaptor

PPC-106T-DC NASA-6109 667Mhz onboard DC-DC Adaptor

PPC-107PT NASA-6109 667Mhz on board AC-DC Adaptor

PPC-107PT-DC NASA-6109 667Mhz on board DC-DC Power

PPC-127T NASA-6109 667Mhz onboard AC-DC Adaptor

PPC-127T-DC NASA-6109 667Mhz onboard DC-DC Adaptor

PPC-128HT NASA-

6104LL

800Mhz AC-DC Adaptor

PPC-129PT NASA-6109 667Mhz onboard AC-DC Adaptor

PPC-129PT-DC NASA-6109 667Mhz on board DC-DC Adaptor

PPC-156T NASA-6102 667Mhz onboard AC-DC Power

PPC-157T NASA-6109 667Mhz onboard AC-DC Adaptor

PPC-157T-DC NASA-6109 667Mhz on board DC-DC Adaptor

PPC-158T NASA-6111 667Mhz onboard AC-DC Power

PPC-159T NASA-6101 667Mhz onboard AC-DC Power

PPC-1510PT NASA-6109 667Mhz onboard AC-DC Power

PPC-1510PT-DC NASA-6109 667Mhz on board DC-DC Adaptor

-5 -

Ⅴ. Touch Panel

1.Application

2. Warranty

3. Features

4. Characteristics

4.1Usable Temperature Range

4.2StorageTemperature Range

4.3Input Method

5. Electrical Specifications

5.1Linearity

5.2Insulation Resistance

5.3Chattering Time

6. Mechanical Specifications

6.1OperatingForce (with pen)

6.2Surface Hardness

7. Optical Specifications

7.1Light Transmittance

8. Reliability

8.1Line drawing operation

8.2Pen hitting operation

9. Environment Durability Performance

9.1High Temperature Test

9.2LowTemperatureTest

9.3Humidity Test

9.4Thermal ShockTest

9.5Resistanceto Chemical

10. Quality Level

10.1Inspectioncondition

10.2Criterion

10.3Glass Fragment

10.4Newton ring

-6 -

11. Cautions

1.Application :Thisspecification is applied to 6wireTouchPanel.

2.Warranty: TOUCH PANEL products manufactured tothisspecification shall be capable of meetingall

characteristicsfora minimum period of 12monthsthedate of shipping from NAGASAKIIPCwhen stored or used as

specifiedundernormal conditions within the contents of these sheets. If TOUCH PANEL productsarenotstored or

usedasspecified herein, it will bevoidthe 12 months warranty.

3.Features

Type ：AnalogResistiveTypeTouchPanel

InputMode ：PolyesterPen orFinger

Structure ：Film----- ITO Film Glass----ITOGlass

4.Characteristics

4.1OperatingTemperature Range : From–20 to60 (Humidity90%RHorlower,nodewconditionshallbe℃ ℃

acceptable)

4.2StorageTemperature Range : From–30 to70℃ ℃

(Humidity90%RH or lower, no dewconditionshall be acceptable)

4.3Input Method：

(1)withPolyester Pen：

Operationand measurement with a penmustbe carried out under thefollowing trip condition：

Material：Polyester Tip：SR0.8millimeter

(2)with Finger：

Operationandmeasurement with a finger must be carriedoutunderthe

Material：Siliconrubber (Hardness: 60º Hs) Tip：SR12.5 millimeter

5.Electrical Specifications

5.1Linearity Direction：± 1.5% or less (with calibrationcontroller)

5.2Insulation Resistance：20MOor more@DC 25V

5.3ChatteringTime ：10 millisecond orless @ 100KO

6.MechanicalSpecifications Item No. ItemRatingsTestMethods & Condition

6-1Operating Force（withPolyester PenSR 0.8）

Accordingtoapplicable product specification Less than150g Using a loadcell with a PolyesterPen conforming to the

specificationsset forth in item 4.3(1) attached to itstip, apply a vertical loadwithinthe validarea.

Usingthemeasurement circuit illustrated indiagram 6-1below,take the gauge value whenthevoltage value 4.5V or

greateras the pressure load value.

6-2Surface Hardness : 2H orHigher JIS-K5400

-7 -

7.OpticalSpecifications

7.1LightTransmittance(TotalTransmittance)：More than 78%（Measuringapparatus：Haze meter-madeby

BYK-Gardner

Type：Haze–Gard-plus 4726 Illuminant：CIE-AStandard：ASTM D 1003）

8.ReliabilityItem No. Item RatingsTestMethods& Condition

8-1Line drawing operation 1,000,000 times of drawingRequirementin paragraph 5 and6Drawingmustoccurin

followingmanner at any point withinanAction area.

1)Testing equipment：Pen plotter

2)Testing load / force：2.5 N

3)Sliding speed：200 mm / second

4)Tipprobe：Polyester Pen asdefined in sub-paragraph4-3（1）

8-2Pen hitting operation 5,000,000hits with a penRequirement in paragraph 5and 6Hitsmustbemadeinthe

followingmanner at any pointwithinat effective area.

1)Testing equipment：Pen plotter

2)Testing load：2.5 N

3)Pressspeed：3hits / second

4)Tipprobe：PolyesterPen as defined insub-paragraph 4-3(1)

9.Environment Durability PerformanceItemNo. Item Ratings Test Methods & Condition

9-1HighTemperatureTest Requirement inparagraph 5 and 6 Putit in a vesselat the conditionof70±1and45℃

±1%humidityrelative for 120 hours. Moreoverletit alone for 24 hours ormorein a room temperature andmeasureit.

9-2LowTemperatureTest Requirement in paragraph5 and 6 Putit in avessel at the conditionof –30±1for120℃

hours.Moreover, let it alone for24hours or more in aroomtemperature and measure it.

9-3Humidity Test Requirementinparagraph 5 and 6Leaveinanenvironmentof60±1and90±1%relative℃

humilityfor120 hours and then perform measurementsafterleaving at room temperature for24 hours

9-4Thermal Shock Test Requirement inparagraph 5 and 6Put it in avessel at theconditionof70±1for30℃

minutes and then –30±1for30minutesandhisprocessisrepeatedby10cycles.Moreoverletitalonefor24ho℃urs

ina room temperature and measureit.

9-5Resistance to chemicals (Surface hard coating) Noabnormalityin external appearance Lightly wipe thesurface

withmethyl alcohol, artificial perspirationorhousehold cleanser (neutral).

10.QualityLevel

10.1 Inspection ConditionThe inspection shall beperformedby using Back light150-300 cd/m2 ,1000-1400Lux

（naturallight）underthesurfaceof sensor. The panel shallbe position sensors from 45cmformeyes and an.

Angle30 degree (15~45), 15 secondviewing time.

-8 -

10.2CriterionThe followings areappliedtoviewing area The item 10.2 (1,2,3,4) should apply totheVA(view area)

unlessnone VA affect electricalperformance

(1)Scratch

Width0.1mmandlength20mm≦ ≦ ：Accept.

Width> 10 mm orLength> 20mm ：Reject

(2)Granular foreign object

Diameter0.5mm≦：Acceptable 0.5mm ＜Diameter：Unacceptable

(3)Linear foreign object (fiber)

Width0.05andLength5mm≦ ≦ ：Accept Width0.05andLength≧＞5mm：Unacceptable

(4)Blistering(Puffiness, Baggy) Check throughany0.5millimeter gauge whether aTouchPanelsurfacefilmdoesnot

contactameasuringface.0.5mmgauge 0.5mm Tablet

10.3Glass Fragment

(1)CornerFragmenta2mm≦；b2mmand≦（c:breakheightt≦）： Itis acceptable two（t：GlassThickness）

(2)SideFragmenta3mm,b2.0mmandc1/2t≦ ≦ ≦ ：acceptable

fiveandintervalof faults is 20mm minimum everyside. (t：GlassThickness)

10.4Newton ring

Diameter35mm≦，Acceptable

Passifdefect that fails size cannot be seenwhenheld in front of colors programonmonitor.

11.CautionsItemNo. Subject Note

11.1Storage1)StoreTouchPanel at the stated temperatureand humidity range.

2)StoreTouchPanel with original packing.

3)DonotexposeTouch Panel directly to the sun

11.2Unpacking1) Do not hold FPC/ Copper tail to take TouchPanel out of the package.

2)Open the package after checking “UP / DOWN”mark.

3)Donotput the heavy shock and stress onTouchPanel.

11.3Handling1)Weargloves at handling to prevent stains on TouchPanel or injury by thesharp edge of touchglass.

2)Do not hold FPC/ Copper while handling TouchPanel.

3)DonotpileTouchPanels and put heavy matter on TouchPanel.

4)Donot add any stress ontouch film.

5)Use dry cloth or softclothwith alcohol, neutral detergentorone with ethanol atcleaningin case of dirt.

6)Do not use organicsolventsexcept alcohol. 11.4Assembling 1)Avoid excessive force on theTouchPanel.

7)Donotgiveunnecessary strain to the FPC / Copper tail while assembling.

-9 -

Ⅵ. NASA-6109 User’s Manual

Thecontentof this manual has been checkedforaccuracy.The manufacturer assumes no responsibility forany

inaccuraciesthatmaybecontainedinthismanual. Themanufacturerreservestherighttomakeimprovementsor

modificationtothe this document and/ortheproduct at any time withoutpriornotice. No part of this document may be

reproduced,transmitted,photocopied or translated into any language,inany form or by any means,electronic,

mechanical,magnetic, optical or chemical, without theprior written permissionofthemanufacturer.VIAisregistered

trademarkofVIATechnology Incorporation VT82C686A mayonlybeused to identify products of VIATechnology

Realtek isregistered trademark of Realtek TechnologiesInc.Multiscan isatrademarkofSonyCorpofAmericaIBM,

EGA,VGA, PC/XT, PC/AT, OS/2 and PS/2 areregistered trademarks of InternationalBusiness MachinesCorporation

Intelisaregistered trademark of Intel Corporation Plugand Play is registeredtrademarks of Intel CorporationMicrosoft,

Windowsand MS-DOS are trademarks ofMicrosoft Corporation AwardisatrademarkofAward Software Inc. PCIisa

registeredtrademark of PCI Special InterestGroupOther product

namesmentionedherein are used for identificationpurposeonly and may be trademarksand/or registered trademarks

oftheirrespective companies.

Installation Notice

Themanufacturerrecommends using a grounded plug toensureproper motherboard operation. Care should beused

inproper conjunction with a grounded powerreceptacletoavoid possible electrical shock. All integratedcircuitsonthis

motherboardare sensitive to static electricity. To avoid damaging componentsfrom electrostatic discharge, pleasedo

notremove the board from the anti-static packing before discharging any static electricityto your body, bywearinga

wrist-groundingstrap.Themanufacturerisnot responsible for any damage tothemotherboarddueto

improperoperation.

Specification

Thismanual covers two differentlayoutmodels, and the respective boardlayoutsare shown in chapter 1-4. Please

refertothefollowingdescription to make sure which model on hand beforeusing.

MODEL NASA-6109

SystemChipset VIAPM133 , VT8601/VT686B

-10 -

CPUSupporting EmbeddedVIAEDENESP5000(533MHz)or VIA c3

800MHzCPU

LANAdapter Realtek8139Cor Intel 82559ER

AudioAdapter *Optional

VGAAdapter Onchip2D/3D Graphic Controllerw/SMA up to8MB

LCDSupporting TFTTTLLCDoptionalLVDS l

ROM-Disk Socket Yes (2-288MB)

TV-Out Optional

I/OPort 4S/2P

IDEInterface U. DMA 33/66/100

DIMMSocket 1

Max.RAMSize 512MB

VGAMemorySize 8MB

WatchDogTimer Optional

AT/ATXPower Yes

USBFeature Yes

BoardSizeFormat 203x146mmSBCFormat

Chapter 1. Introduction

Inorderto cope with the challengesoftheheating issues and demand ofmuchmore diminutive embedded system in

diverseapplication, NASA-6109 series CPU boardsprovides the ultimate solution by integratingwithVIA’stechnology

lowpower consumptionVIAC3series CPU and VIAEDENfanlessESP series CPU. NASA-6109seriesCPU boards

offerthe assorted functions for variousapplicationssuch as high-end POS systems, kiosks, networkingsystems,

controllingterminals and other embedded systems.

NASA-6109 is a 5.25”SBCuses VIA chipsets built-inVGAandAudiofeatureonboard, support TFT TTL LCDfeature

withLVDS interface as feature option; built-in Realtek 8139XX LAN chipsetwith RJ45 Jack for 10BaseT/ 100BaseT.The

option ofIntel 82559ERchip is also provided for theLANsupport. This SBC offers the highestperformancePC

specificationin the industry with embeddedlowpower consumption VIA EDEN fanless ESP seriesCPUESP5000,and

Tabla de contenidos

Manuales populares de Panel táctil de otras marcas

FlowLine

FlowLine Data loop Manual de usuario

ALPEX

ALPEX AEx-8 P Series Manual de usuario

Ltech

Ltech E5S Manual de usuario

Harman

Harman AMX MODERO S MSD-701-L2 Manual de usuario

Acnodes

Acnodes PC 1150 Manual de usuario

AIS

AIS IP10IA99 series Manual de usuario

IBASE Technology

IBASE Technology ASTUT-152-RE1S Manual de usuario

YASKAWA

YASKAWA TP 610C Manual de usuario

B&R

B&R Power Panel C Series Manual de usuario

Beijer Electronics

Beijer Electronics X2 control Manual de usuario

AXIOMTEK

AXIOMTEK GOT321W-521 Manual de usuario

TRIDONIC.ATCO

TRIDONIC.ATCO x-touchBOX Manual de usuario

Qomo

Qomo QIT1386 Manual de usuario

DFI

DFI KS104-CD Manual de usuario

AMX

AMX AXP-PPC Guía

Sartorius

Sartorius X3 PR 5410 Manual de usuario

AMX

AMX Modero X Series Manual de usuario

Advantech

Advantech TPC-30 Series Manual de usuario